I also have a problem with Vista Beta2, it hangs at Completing Upgrade. Am
installing on a Raid 0 array, any suggestions?

Did you reach the phase of Install where you were given the option to load
your storage drivers? I suspect that might be one of the problems. Have you
tried booting into safe mode to finish the installation?
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"Tom V." <(E-Mail Removed)> wrote in message
news:0994095B-8965-4EA2-9199-(E-Mail Removed)...
>I also have a problem with Vista Beta2, it hangs at Completing Upgrade. Am
> installing on a Raid 0 array, any suggestions?

I'm getting the exact same thing, but I have no RAID array. I'm simply
trying to install it on an empty 120gb IDE drive. I've gone through this
about 4 times, and left it last night while I slept to see if it would finish
and it does not. The mouse still works, but there is no HDD activity at all.

"Tom V." wrote:

> I also have a problem with Vista Beta2, it hangs at Completing Upgrade. Am
> installing on a Raid 0 array, any suggestions?

I've got the same problem. I've tried it twice and it hangs at the exact
same point of the "completing upgrade" part. No HDD activity, mouse still
works but no way of rebooting without turning off the comp.

"JeSTeR7" wrote:

> I'm getting the exact same thing, but I have no RAID array. I'm simply
> trying to install it on an empty 120gb IDE drive. I've gone through this
> about 4 times, and left it last night while I slept to see if it would finish
> and it does not. The mouse still works, but there is no HDD activity at all.
>
> "Tom V." wrote:
>
> > I also have a problem with Vista Beta2, it hangs at Completing Upgrade. Am
> > installing on a Raid 0 array, any suggestions?

I have the same problem. I've let the computer run for 5+ hours, and nothing
happens. Would someone please address this?

"Tom V." wrote:

> I also have a problem with Vista Beta2, it hangs at Completing Upgrade. Am
> installing on a Raid 0 array, any suggestions?

Andre's response worked for me. During the reboot right before the
"completing upgrade" happens press f8. Select startup in safe mode, it
should install properly from there. Note: It still took about 30 mins to
complete the completing upgrade portion of the installation. Hope this helps.

"Tom F." wrote:

> I have the same problem. I've let the computer run for 5+ hours, and nothing
> happens. Would someone please address this?
>
> "Tom V." wrote:
>
> > I also have a problem with Vista Beta2, it hangs at Completing Upgrade. Am
> > installing on a Raid 0 array, any suggestions?