Hi,

I was use the code below mention in macro, in office2002 its working
fine, i have to run office2000 it was show error like : compile error
in hidden module: sheet1

kindly advice me what shall i want to do.

Sheet1 Code:
Private Sub Worksheet_Calculate()
Range("X12").EntireRow.Hidden = (Range("X12").Value = 0)
Range("X13").EntireRow.Hidden = (Range("X13").Value = 0)
End Sub

Private Sub CommandButton5_Click()
Dim cell As Range
Range("D913").ClearContents
MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
End Sub

Private Sub CommandButton6_Click()
ActiveWorkbook.Save
MsgBox "SAVED SUCESSFULLY"
End Sub
Private Sub CommandButton7_Click()
On Error Resume Next
Range("C7:E21,E6,F6,F12,F13").PrintPreview
On Error GoTo 0
End Sub

Private Sub CommandButton8_Click()
Application.Quit
MsgBox "CLOSED SUCESSFULLY"
ActiveWorkbook.Close savechanges:=Flase
End Sub

Private Sub CommandButton2_Click()
Dim cell As Range
Range("D913").ClearContents
MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
End Sub
Private Sub Calendar1_Click()
ACTIVECELL.Value = CDbl(Calendar1.Value)
ACTIVECELL.NumberFormat = "DD/MM/yyyy"
ACTIVECELL.Select

End Sub

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Application.Intersect(Range("F6,D9,D10"), Target) Is
Nothing Then
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
Calendar1.Top = Target.Top + Target.Height
Calendar1.Visible = True
' select Today's date in the Calendar
Calendar1.Value = Date
ElseIf Calendar1.Visible Then Calendar1.Visible = False
End If

If ACTIVECELL.Address = Range("C7").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C9").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C10").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C11").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C12").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C13").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D14").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C15").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C16").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C17").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(1, 0).Select
End If
If ACTIVECELL.Address = Range("C18").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C19").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C20").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C21").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D15").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D16").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D17").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D18").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D19").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D20").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D21").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E6").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E9").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E10").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E11").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E12").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E15").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E16").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E17").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E18").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E19").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E20").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E21").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E27").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("X12").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("X13").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("Y8").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("Y9").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("Y10").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If


End Sub
Private Sub CommandButton1_Click()
On Error Resume Next
Range("C7:E21,E6,F6,F12,F13").PrintPreview
On Error GoTo 0
End Sub


Private Sub CommandButton3_Click()
Application.Quit
MsgBox "CLOSED SUCESSFULLY"
ActiveWorkbook.Close savechanges:=Flase
End Sub

Private Sub CommandButton4_Click()
ActiveWorkbook.Save
MsgBox "SAVED SUCESSFULLY"
End Sub


Workbook code is:


Private Sub Workbook_Activate()
Dim bar As CommandBar
For Each bar In Application.CommandBars
bar.Enabled = False
Next
fbar = Application.DisplayFormulaBar
Sbar = Application.DisplayStatusBar
With Application
.DisplayFormulaBar = False
.DisplayStatusBar = False
End With
End Sub
Private Sub Workbook_Deactivate()
Dim bar As CommandBar
For Each bar In Application.CommandBars
bar.Enabled = True
Next
fbar = Application.DisplayFormulaBar
Sbar = Application.DisplayStatusBar
With Application
.DisplayFormulaBar = True
.DisplayStatusBar = True
End With

End Sub

Private Sub Workbook_Open()

MsgBox "CREATED BY MOHAMMED & MUTHU, BANGALORE TEAM,IF ANY QUERY-
SUGGESTION FEEL FREE CT:+919986636272 E-
MAIL:(E-Mail Removed)"

End Sub


Module 1 code is:

Option Explicit
'Main Function
Function deen(ByVal MyNumber)

Dim Rupees, Paise, Temp
Dim DecimalPlace, Count
ReDim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Lac "
Place(4) = " Crore "
Place(5) = " Arab " ' String representation of amount
MyNumber = Trim(Str(MyNumber)) ' Position of decimal place 0
if none
DecimalPlace = InStr(MyNumber, ".")
'Convert Paise and set MyNumber to Rupee amount
If DecimalPlace > 0 Then
Paise = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) &
"00", 2))
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
Count = 1
Do While MyNumber <> ""
If Count = 1 Then Temp = GetHundreds(Right(MyNumber, 3))
If Count > 1 Then Temp = GetHundreds(Right(MyNumber, 2))
If Temp <> "" Then Rupees = Temp & Place(Count) & Rupees
If Count = 1 And Len(MyNumber) > 3 Then
MyNumber = Left(MyNumber, Len(MyNumber) - 3)
Else
If Count > 1 And Len(MyNumber) > 2 Then
MyNumber = Left(MyNumber, Len(MyNumber) - 2)
Else
MyNumber = ""
End If
End If
Count = Count + 1
Loop
Select Case Rupees
Case ""
Rupees = "No Rupees"
Case "One"
Rupees = "One Rupee"
Case Else
'Rupees = Rupees & " Rupees"
Rupees = "Rupees " & Rupees

End Select
Select Case Paise
Case ""
'Paise = ""
Paise = " Only"
Case "One"
Paise = " and One Paisa"
Case Else
Paise = " and " & Paise & " Paise"

End Select
deen = Rupees & Paise
End Function
'*******************************************
' Converts a number from 100-999 into text *
'*******************************************
Function GetHundreds(ByVal MyNumber)
Dim Result As String
If Val(MyNumber) = 0 Then Exit Function
MyNumber = Right("000" & MyNumber, 3) 'Convert the hundreds
place
If Mid(MyNumber, 1, 1) <> "0" Then
Result = GetDigit(Mid(MyNumber, 1, 1)) & " Hundred "
End If
'Convert the tens and ones place
If Mid(MyNumber, 2, 1) <> "0" Then
Result = Result & GetTens(Mid(MyNumber, 2))
Else
Result = Result & GetDigit(Mid(MyNumber, 3))
End If
GetHundreds = Result
End Function
'*********************************************
' Converts a number from 10 to 99 into text. *
'*********************************************
Function GetTens(TensText)
Dim Result As String
Result = "" 'null out the temporary function value
If Val(Left(TensText, 1)) = 1 Then ' If value between 10-19
Select Case Val(TensText)
Case 10: Result = "Ten"
Case 11: Result = "Eleven"
Case 12: Result = "Twelve"
Case 13: Result = "Thirteen"
Case 14: Result = "Fourteen"
Case 15: Result = "Fifteen"
Case 16: Result = "Sixteen"
Case 17: Result = "Seventeen"
Case 18: Result = "Eighteen"
Case 19: Result = "Nineteen"
Case Else
End Select
Else ' If value between 20-99
Select Case Val(Left(TensText, 1))
Case 2: Result = "Twenty "
Case 3: Result = "Thirty "
Case 4: Result = "Forty "
Case 5: Result = "Fifty "
Case 6: Result = "Sixty "
Case 7: Result = "Seventy "
Case 8: Result = "Eighty "
Case 9: Result = "Ninety "
Case Else
End Select
Result = Result & GetDigit _
(Right(TensText, 1)) 'Retrieve ones place
End If
GetTens = Result
End Function
'*******************************************
' Converts a number from 1 to 9 into text. *
'*******************************************
Function GetDigit(Digit)
Select Case Val(Digit)
Case 1: GetDigit = "One"
Case 2: GetDigit = "Two"
Case 3: GetDigit = "Three"
Case 4: GetDigit = "Four"
Case 5: GetDigit = "Five"
Case 6: GetDigit = "Six"
Case 7: GetDigit = "Seven"
Case 8: GetDigit = "Eight"
Case 9: GetDigit = "Nine"
Case Else: GetDigit = ""
End Select
End Function

>>ActiveWorkbook.Close savechanges:=Flase

May be the problem. There is more than one of these.

--
Jim
"deen" <(E-Mail Removed)> wrote in message
news:7483b477-1519-4ca9-9b63-(E-Mail Removed)...
> Hi,
>
> I was use the code below mention in macro, in office2002 its working
> fine, i have to run office2000 it was show error like : compile error
> in hidden module: sheet1
>
> kindly advice me what shall i want to do.
>
> Sheet1 Code:
> Private Sub Worksheet_Calculate()
> Range("X12").EntireRow.Hidden = (Range("X12").Value = 0)
> Range("X13").EntireRow.Hidden = (Range("X13").Value = 0)
> End Sub
>
> Private Sub CommandButton5_Click()
> Dim cell As Range
> Range("D913").ClearContents
> MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
> End Sub
>
> Private Sub CommandButton6_Click()
> ActiveWorkbook.Save
> MsgBox "SAVED SUCESSFULLY"
> End Sub
> Private Sub CommandButton7_Click()
> On Error Resume Next
> Range("C7:E21,E6,F6,F12,F13").PrintPreview
> On Error GoTo 0
> End Sub
>
> Private Sub CommandButton8_Click()
> Application.Quit
> MsgBox "CLOSED SUCESSFULLY"
> ActiveWorkbook.Close savechanges:=Flase
> End Sub
>
> Private Sub CommandButton2_Click()
> Dim cell As Range
> Range("D913").ClearContents
> MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
> End Sub
> Private Sub Calendar1_Click()
> ACTIVECELL.Value = CDbl(Calendar1.Value)
> ACTIVECELL.NumberFormat = "DD/MM/yyyy"
> ACTIVECELL.Select
>
> End Sub
>
> Private Sub Worksheet_SelectionChange(ByVal Target As Range)
> If Target.Cells.Count > 1 Then Exit Sub
> If Not Application.Intersect(Range("F6,D9,D10"), Target) Is
> Nothing Then
> Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
> Calendar1.Top = Target.Top + Target.Height
> Calendar1.Visible = True
> ' select Today's date in the Calendar
> Calendar1.Value = Date
> ElseIf Calendar1.Visible Then Calendar1.Visible = False
> End If
>
> If ACTIVECELL.Address = Range("C7").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C9").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C10").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C11").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C12").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C13").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("D14").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C15").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C16").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C17").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(1, 0).Select
> End If
> If ACTIVECELL.Address = Range("C18").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C19").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C20").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("C21").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("D15").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("D16").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("D17").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("D18").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("D19").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("D20").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("D21").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E6").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E9").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E10").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E11").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E12").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E15").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E16").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E17").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E18").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E19").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E20").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E21").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("E27").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("X12").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("X13").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("Y8").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("Y9").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
> If ACTIVECELL.Address = Range("Y10").Address Then
> pword = InputBox("Enter Password To Edit State:")
> If pword = "deen01" Then ACTIVECELL.Select Else
> ACTIVECELL.Offset(0, 0).Select
> End If
>
>
> End Sub
> Private Sub CommandButton1_Click()
> On Error Resume Next
> Range("C7:E21,E6,F6,F12,F13").PrintPreview
> On Error GoTo 0
> End Sub
>
>
> Private Sub CommandButton3_Click()
> Application.Quit
> MsgBox "CLOSED SUCESSFULLY"
> ActiveWorkbook.Close savechanges:=Flase
> End Sub
>
> Private Sub CommandButton4_Click()
> ActiveWorkbook.Save
> MsgBox "SAVED SUCESSFULLY"
> End Sub
>
>
> Workbook code is:
>
>
> Private Sub Workbook_Activate()
> Dim bar As CommandBar
> For Each bar In Application.CommandBars
> bar.Enabled = False
> Next
> fbar = Application.DisplayFormulaBar
> Sbar = Application.DisplayStatusBar
> With Application
> .DisplayFormulaBar = False
> .DisplayStatusBar = False
> End With
> End Sub
> Private Sub Workbook_Deactivate()
> Dim bar As CommandBar
> For Each bar In Application.CommandBars
> bar.Enabled = True
> Next
> fbar = Application.DisplayFormulaBar
> Sbar = Application.DisplayStatusBar
> With Application
> .DisplayFormulaBar = True
> .DisplayStatusBar = True
> End With
>
> End Sub
>
> Private Sub Workbook_Open()
>
> MsgBox "CREATED BY MOHAMMED & MUTHU, BANGALORE TEAM,IF ANY QUERY-
> SUGGESTION FEEL FREE CT:+919986636272 E-
> MAIL:(E-Mail Removed)"
>
> End Sub
>
>
> Module 1 code is:
>
> Option Explicit
> 'Main Function
> Function deen(ByVal MyNumber)
>
> Dim Rupees, Paise, Temp
> Dim DecimalPlace, Count
> ReDim Place(9) As String
> Place(2) = " Thousand "
> Place(3) = " Lac "
> Place(4) = " Crore "
> Place(5) = " Arab " ' String representation of amount
> MyNumber = Trim(Str(MyNumber)) ' Position of decimal place 0
> if none
> DecimalPlace = InStr(MyNumber, ".")
> 'Convert Paise and set MyNumber to Rupee amount
> If DecimalPlace > 0 Then
> Paise = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) &
> "00", 2))
> MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
> End If
> Count = 1
> Do While MyNumber <> ""
> If Count = 1 Then Temp = GetHundreds(Right(MyNumber, 3))
> If Count > 1 Then Temp = GetHundreds(Right(MyNumber, 2))
> If Temp <> "" Then Rupees = Temp & Place(Count) & Rupees
> If Count = 1 And Len(MyNumber) > 3 Then
> MyNumber = Left(MyNumber, Len(MyNumber) - 3)
> Else
> If Count > 1 And Len(MyNumber) > 2 Then
> MyNumber = Left(MyNumber, Len(MyNumber) - 2)
> Else
> MyNumber = ""
> End If
> End If
> Count = Count + 1
> Loop
> Select Case Rupees
> Case ""
> Rupees = "No Rupees"
> Case "One"
> Rupees = "One Rupee"
> Case Else
> 'Rupees = Rupees & " Rupees"
> Rupees = "Rupees " & Rupees
>
> End Select
> Select Case Paise
> Case ""
> 'Paise = ""
> Paise = " Only"
> Case "One"
> Paise = " and One Paisa"
> Case Else
> Paise = " and " & Paise & " Paise"
>
> End Select
> deen = Rupees & Paise
> End Function
> '*******************************************
> ' Converts a number from 100-999 into text *
> '*******************************************
> Function GetHundreds(ByVal MyNumber)
> Dim Result As String
> If Val(MyNumber) = 0 Then Exit Function
> MyNumber = Right("000" & MyNumber, 3) 'Convert the hundreds
> place
> If Mid(MyNumber, 1, 1) <> "0" Then
> Result = GetDigit(Mid(MyNumber, 1, 1)) & " Hundred "
> End If
> 'Convert the tens and ones place
> If Mid(MyNumber, 2, 1) <> "0" Then
> Result = Result & GetTens(Mid(MyNumber, 2))
> Else
> Result = Result & GetDigit(Mid(MyNumber, 3))
> End If
> GetHundreds = Result
> End Function
> '*********************************************
> ' Converts a number from 10 to 99 into text. *
> '*********************************************
> Function GetTens(TensText)
> Dim Result As String
> Result = "" 'null out the temporary function value
> If Val(Left(TensText, 1)) = 1 Then ' If value between 10-19
> Select Case Val(TensText)
> Case 10: Result = "Ten"
> Case 11: Result = "Eleven"
> Case 12: Result = "Twelve"
> Case 13: Result = "Thirteen"
> Case 14: Result = "Fourteen"
> Case 15: Result = "Fifteen"
> Case 16: Result = "Sixteen"
> Case 17: Result = "Seventeen"
> Case 18: Result = "Eighteen"
> Case 19: Result = "Nineteen"
> Case Else
> End Select
> Else ' If value between 20-99
> Select Case Val(Left(TensText, 1))
> Case 2: Result = "Twenty "
> Case 3: Result = "Thirty "
> Case 4: Result = "Forty "
> Case 5: Result = "Fifty "
> Case 6: Result = "Sixty "
> Case 7: Result = "Seventy "
> Case 8: Result = "Eighty "
> Case 9: Result = "Ninety "
> Case Else
> End Select
> Result = Result & GetDigit _
> (Right(TensText, 1)) 'Retrieve ones place
> End If
> GetTens = Result
> End Function
> '*******************************************
> ' Converts a number from 1 to 9 into text. *
> '*******************************************
> Function GetDigit(Digit)
> Select Case Val(Digit)
> Case 1: GetDigit = "One"
> Case 2: GetDigit = "Two"
> Case 3: GetDigit = "Three"
> Case 4: GetDigit = "Four"
> Case 5: GetDigit = "Five"
> Case 6: GetDigit = "Six"
> Case 7: GetDigit = "Seven"
> Case 8: GetDigit = "Eight"
> Case 9: GetDigit = "Nine"
> Case Else: GetDigit = ""
> End Select
> End Function
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

Hi JIM,

sorry for late reply

Thx for reply, as per your instruction i have change the as true in
both area,

but till problem continue.

kidly guide me.

















On Dec 16, 12:24 am, "Jim Rech" <jrr...@live.com> wrote:
> >>ActiveWorkbook.Close savechanges:=Flase
>
> May be the problem. There is more than one of these.
>
> --
> Jim"deen" <ah.d...@gmail.com> wrote in message
>
> news:7483b477-1519-4ca9-9b63-(E-Mail Removed)...
>
> > Hi,
>
> > I was use the code below mention in macro, in office2002 its working
> > fine, i have to run office2000 it was show error like : compile error
> > in hidden module: sheet1
>
> > kindly advice me what shall i want to do.
>
> > Sheet1 Code:
> > Private Sub Worksheet_Calculate()
> > Range("X12").EntireRow.Hidden = (Range("X12").Value = 0)
> > Range("X13").EntireRow.Hidden = (Range("X13").Value = 0)
> > End Sub
>
> > Private Sub CommandButton5_Click()
> > Dim cell As Range
> > Range("D913").ClearContents
> > MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
> > End Sub
>
> > Private Sub CommandButton6_Click()
> > ActiveWorkbook.Save
> > MsgBox "SAVED SUCESSFULLY"
> > End Sub
> > Private Sub CommandButton7_Click()
> > On Error Resume Next
> > Range("C7:E21,E6,F6,F12,F13").PrintPreview
> > On Error GoTo 0
> > End Sub
>
> > Private Sub CommandButton8_Click()
> > Application.Quit
> > MsgBox "CLOSED SUCESSFULLY"
> > ActiveWorkbook.Close savechanges:=Flase
> > End Sub
>
> > Private Sub CommandButton2_Click()
> > Dim cell As Range
> > Range("D913").ClearContents
> > MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
> > End Sub
> > Private Sub Calendar1_Click()
> > ACTIVECELL.Value = CDbl(Calendar1.Value)
> > ACTIVECELL.NumberFormat = "DD/MM/yyyy"
> > ACTIVECELL.Select
>
> > End Sub
>
> > Private Sub Worksheet_SelectionChange(ByVal Target As Range)
> > If Target.Cells.Count > 1 Then Exit Sub
> > If Not Application.Intersect(Range("F6,D9,D10"), Target) Is
> > Nothing Then
> > Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
> > Calendar1.Top = Target.Top + Target.Height
> > Calendar1.Visible = True
> > ' select Today's date in the Calendar
> > Calendar1.Value = Date
> > ElseIf Calendar1.Visible Then Calendar1.Visible = False
> > End If
>
> > If ACTIVECELL.Address = Range("C7").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C9").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C10").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C11").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C12").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C13").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("D14").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C15").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C16").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C17").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(1, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C18").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C19").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C20").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("C21").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("D15").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("D16").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("D17").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("D18").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("D19").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("D20").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("D21").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E6").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E9").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E10").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E11").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E12").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E15").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E16").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E17").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E18").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E19").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E20").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E21").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("E27").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("X12").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("X13").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("Y8").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("Y9").Address Then
> > pword = InputBox("Enter Password To Edit State:")
> > If pword = "deen01" Then ACTIVECELL.Select Else
> > ACTIVECELL.Offset(0, 0).Select
> > End If
> > If ACTIVECELL.Address = Range("Y10").Address Then
> > pword = InputBox("Enter
>
> ...
>
> read more >>

Sorry but that is a huge amount of code and I cannot work through it. If
you open that module in the VBE and do a Debug, Compile you should be taken
to the first problem line of code by the debugger.

--
Jim
"deen" <(E-Mail Removed)> wrote in message
news:ea5df4b1-dc62-4546-972d-(E-Mail Removed)...
| Hi JIM,
|
| sorry for late reply
|
| Thx for reply, as per your instruction i have change the as true in
| both area,
|
| but till problem continue.
|
| kidly guide me.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| On Dec 16, 12:24 am, "Jim Rech" <jrr...@live.com> wrote:
| > >>ActiveWorkbook.Close savechanges:=Flase
| >
| > May be the problem. There is more than one of these.
| >
| > --
| > Jim"deen" <ah.d...@gmail.com> wrote in message
| >
| >
news:7483b477-1519-4ca9-9b63-(E-Mail Removed)...
| >
| > > Hi,
| >
| > > I was use the code below mention in macro, in office2002 its working
| > > fine, i have to run office2000 it was show error like : compile error
| > > in hidden module: sheet1
| >
| > > kindly advice me what shall i want to do.
| >
| > > Sheet1 Code:
| > > Private Sub Worksheet_Calculate()
| > > Range("X12").EntireRow.Hidden = (Range("X12").Value = 0)
| > > Range("X13").EntireRow.Hidden = (Range("X13").Value = 0)
| > > End Sub
| >
| > > Private Sub CommandButton5_Click()
| > > Dim cell As Range
| > > Range("D913").ClearContents
| > > MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
| > > End Sub
| >
| > > Private Sub CommandButton6_Click()
| > > ActiveWorkbook.Save
| > > MsgBox "SAVED SUCESSFULLY"
| > > End Sub
| > > Private Sub CommandButton7_Click()
| > > On Error Resume Next
| > > Range("C7:E21,E6,F6,F12,F13").PrintPreview
| > > On Error GoTo 0
| > > End Sub
| >
| > > Private Sub CommandButton8_Click()
| > > Application.Quit
| > > MsgBox "CLOSED SUCESSFULLY"
| > > ActiveWorkbook.Close savechanges:=Flase
| > > End Sub
| >
| > > Private Sub CommandButton2_Click()
| > > Dim cell As Range
| > > Range("D913").ClearContents
| > > MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
| > > End Sub
| > > Private Sub Calendar1_Click()
| > > ACTIVECELL.Value = CDbl(Calendar1.Value)
| > > ACTIVECELL.NumberFormat = "DD/MM/yyyy"
| > > ACTIVECELL.Select
| >
| > > End Sub
| >
| > > Private Sub Worksheet_SelectionChange(ByVal Target As Range)
| > > If Target.Cells.Count > 1 Then Exit Sub
| > > If Not Application.Intersect(Range("F6,D9,D10"), Target) Is
| > > Nothing Then
| > > Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
| > > Calendar1.Top = Target.Top + Target.Height
| > > Calendar1.Visible = True
| > > ' select Today's date in the Calendar
| > > Calendar1.Value = Date
| > > ElseIf Calendar1.Visible Then Calendar1.Visible = False
| > > End If
| >
| > > If ACTIVECELL.Address = Range("C7").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C9").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C10").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C11").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C12").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C13").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D14").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C15").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C16").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C17").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(1, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C18").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C19").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C20").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C21").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D15").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D16").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D17").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D18").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D19").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D20").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D21").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E6").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E9").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E10").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E11").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E12").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E15").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E16").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E17").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E18").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E19").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E20").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E21").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E27").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("X12").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("X13").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("Y8").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("Y9").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("Y10").Address Then
| > > pword = InputBox("Enter
| >
| > ...
| >
| > read more >>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

Hi Jim,

Can you explain with code how can i debug , coz i am new to the macro.

thx in advance,

regards,

Deen





On Dec 19, 7:43 pm, "Jim Rech" <jrr...@live.com> wrote:
> Sorry but that is a huge amount of code and I cannot work through it. If
> you open that module in the VBE and do a Debug, Compile you should be taken
> to the first problem line of code by the debugger.
>
> --
> Jim"deen" <ah.d...@gmail.com> wrote in message
>
> news:ea5df4b1-dc62-4546-972d-(E-Mail Removed)...
> | Hi JIM,
> |
> | sorry for late reply
> |
> | Thx for reply, as per your instruction i have change the as true in
> | both area,
> |
> | but till problem continue.
> |
> | kidly guide me.
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> | On Dec 16, 12:24 am, "Jim Rech" <jrr...@live.com> wrote:
> | > >>ActiveWorkbook.Close savechanges:=Flase
> | >
> | > May be the problem. There is more than one of these.
> | >
> | > --
> | > Jim"deen" <ah.d...@gmail.com> wrote in message
> | >
> | >news:7483b477-1519-4ca9-9b63-(E-Mail Removed)....
> | >
> | > > Hi,
> | >
> | > > I was use the code below mention in macro, in office2002 its working
> | > > fine, i have to run office2000 it was show error like : compile error
> | > > in hidden module: sheet1
> | >
> | > > kindly advice me what shall i want to do.
> | >
> | > > Sheet1 Code:
> | > > Private Sub Worksheet_Calculate()
> | > > Range("X12").EntireRow.Hidden = (Range("X12").Value = 0)
> | > > Range("X13").EntireRow.Hidden = (Range("X13").Value = 0)
> | > > End Sub
> | >
> | > > Private Sub CommandButton5_Click()
> | > > Dim cell As Range
> | > > Range("D913").ClearContents
> | > > MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
> | > > End Sub
> | >
> | > > Private Sub CommandButton6_Click()
> | > > ActiveWorkbook.Save
> | > > MsgBox "SAVED SUCESSFULLY"
> | > > End Sub
> | > > Private Sub CommandButton7_Click()
> | > > On Error Resume Next
> | > > Range("C7:E21,E6,F6,F12,F13").PrintPreview
> | > > On Error GoTo 0
> | > > End Sub
> | >
> | > > Private Sub CommandButton8_Click()
> | > > Application.Quit
> | > > MsgBox "CLOSED SUCESSFULLY"
> | > > ActiveWorkbook.Close savechanges:=Flase
> | > > End Sub
> | >
> | > > Private Sub CommandButton2_Click()
> | > > Dim cell As Range
> | > > Range("D913").ClearContents
> | > > MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
> | > > End Sub
> | > > Private Sub Calendar1_Click()
> | > > ACTIVECELL.Value = CDbl(Calendar1.Value)
> | > > ACTIVECELL.NumberFormat = "DD/MM/yyyy"
> | > > ACTIVECELL.Select
> | >
> | > > End Sub
> | >
> | > > Private Sub Worksheet_SelectionChange(ByVal Target As Range)
> | > > If Target.Cells.Count > 1 Then Exit Sub
> | > > If Not Application.Intersect(Range("F6,D9,D10"), Target) Is
> | > > Nothing Then
> | > > Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
> | > > Calendar1.Top = Target.Top + Target.Height
> | > > Calendar1.Visible = True
> | > > ' select Today's date in the Calendar
> | > > Calendar1.Value = Date
> | > > ElseIf Calendar1.Visible Then Calendar1.Visible = False
> | > > End If
> | >
> | > > If ACTIVECELL.Address = Range("C7").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C9").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C10").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C11").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C12").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C13").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("D14").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C15").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C16").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C17").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(1, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C18").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C19").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C20").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("C21").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("D15").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("D16").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("D17").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("D18").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("D19").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("D20").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("D21").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E6").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E9").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E10").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E11").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E12").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E15").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E16").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E17").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E18").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E19").Address Then
> | > > pword = InputBox("Enter Password To Edit State:")
> | > > If pword = "deen01" Then ACTIVECELL.Select Else
> | > > ACTIVECELL.Offset(0, 0).Select
> | > > End If
> | > > If ACTIVECELL.Address = Range("E20").Address Then
> | > > pword =
> ...
>
> read more »