I'm using a CF IDE Module as the "only" storage device on my system. This
is were XPe resides and is booted from.
With Flash Media, should EWF be enabled? If so, what are the recommended
settings.

Thanks,
Richard

Richard,

Read this http://msdn.microsoft.com/library/en...SP1_CF_EWF.asp
It should perfectly answer your questions.

--
KM,
BSquare Corporation

> I'm using a CF IDE Module as the "only" storage device on my system. This
> is were XPe resides and is booted from.
> With Flash Media, should EWF be enabled? If so, what are the recommended
> settings.
>
> Thanks,
> Richard

Thanks for the link, it helps alot. Now, Since I'm a little slow
sometimes. What if I wish to create an image, install and let it FBA. Now
I have a few drivers and settings I want to make for the final config. I
planned on simply making a ghost image to other flash for the other systems
that way they are ready o run with all the current settings.


My question is, with EWF, will my register changes be saved? Or do I have
to make all my changes first, then do EWF?
Does EWF stop all writes or reduce the writes to flash?

Thanks

"KM" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Richard,
>
> Read this
http://msdn.microsoft.com/library/en...SP1_CF_EWF.asp
> It should perfectly answer your questions.
>
> --
> KM,
> BSquare Corporation
>
> > I'm using a CF IDE Module as the "only" storage device on my system.
This
> > is were XPe resides and is booted from.
> > With Flash Media, should EWF be enabled? If so, what are the
recommended
> > settings.
> >
> > Thanks,
> > Richard
>
>

You need to get those changes in there without EWF being on, EWF will stop
all writes to the drive.

--
John Vorchak [eMVP]
Szanca Solutions, LLC
Veteran-owned, HUBZone Certified

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com/...ity/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Mule Skinner" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Thanks for the link, it helps alot. Now, Since I'm a little slow
> sometimes. What if I wish to create an image, install and let it FBA.
Now
> I have a few drivers and settings I want to make for the final config. I
> planned on simply making a ghost image to other flash for the other
systems
> that way they are ready o run with all the current settings.
>
>
> My question is, with EWF, will my register changes be saved? Or do I have
> to make all my changes first, then do EWF?
> Does EWF stop all writes or reduce the writes to flash?
>
> Thanks
>
> "KM" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Richard,
> >
> > Read this
> http://msdn.microsoft.com/library/en...SP1_CF_EWF.asp
> > It should perfectly answer your questions.
> >
> > --
> > KM,
> > BSquare Corporation
> >
> > > I'm using a CF IDE Module as the "only" storage device on my system.
> This
> > > is were XPe resides and is booted from.
> > > With Flash Media, should EWF be enabled? If so, what are the
> recommended
> > > settings.
> > >
> > > Thanks,
> > > Richard
> >
> >
>
>

Or will need to commit EWF cache or "commit and disable" if EWF settings are
stored in the registry.

KM

> You need to get those changes in there without EWF being on, EWF will stop
> all writes to the drive.
>
> --
> John Vorchak [eMVP]
> Szanca Solutions, LLC
> Veteran-owned, HUBZone Certified
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Have an opinion on the effectiveness of Microsoft Embedded newsgroups?
Tell
> Microsoft!
> https://www.windowsembeddedeval.com/...ity/newsgroups
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> "Mule Skinner" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Thanks for the link, it helps alot. Now, Since I'm a little slow
> > sometimes. What if I wish to create an image, install and let it FBA.
> Now
> > I have a few drivers and settings I want to make for the final config.
I
> > planned on simply making a ghost image to other flash for the other
> systems
> > that way they are ready o run with all the current settings.
> >
> >
> > My question is, with EWF, will my register changes be saved? Or do I
have
> > to make all my changes first, then do EWF?
> > Does EWF stop all writes or reduce the writes to flash?
> >
> > Thanks
> >
> > "KM" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > Richard,
> > >
> > > Read this
> > http://msdn.microsoft.com/library/en...SP1_CF_EWF.asp
> > > It should perfectly answer your questions.
> > >
> > > --
> > > KM,
> > > BSquare Corporation
> > >
> > > > I'm using a CF IDE Module as the "only" storage device on my system.
> > This
> > > > is were XPe resides and is booted from.
> > > > With Flash Media, should EWF be enabled? If so, what are the
> > recommended
> > > > settings.
> > > >
> > > > Thanks,
> > > > Richard
> > >
> > >
> >
> >
>
>

CP,

This is true if you're talking about RAM overlay.
If the device is without an overlay volume store you can only disable EWF by committing the current RAM overlay to the protected
volume at the same time. You need to properly shut down the device, so the data will not be lost.
You can call commit at any time, but nothing will happen. Only one internal flag in EWF driver will be set. EWF driver will write
content of RAM overlay to disk during the file system graceful shutdown or restart.

--
KM,
BSquare Corporation

> I thought that EWF could just cache all updates to RAM (or whatever you've specified as the overlay) and write them to the CF on
Shutdown. Is that not the case? My application keeps a log as it runs and I need this info. to persist (on CF) between reboots. Can
I do this with EWF enabled?