Hi all,

I have a problem with EWF & Compact Flash. It seems that it can't be
created, as you can see in the logfile.
Please can someone help my to solve this problem.

The image works fine but after some time I get an error about "out of
virtual memory". I don't know what caused this error. Can someone
explain to my what caused this error and how to solve it.

the configuration of EWF I'm set:

Maximum Number of Protected Volumes : 1
Maximum Number of Overlay Levels : 1
EWF Partition Size in KBytes : 0

Protected Volume # 1
Start EWF Enabled : Unchecked
Enable Lazy Write : Unchecked
Disk Number : 0
Partition Number : 1
Disk Type : IDE
Overlay Type : RAM
Optimization Option : Optimal Peformance

This is a part of my FBA logfile:

12:35:07 PM - ConfigureEwf() Start.

12:35:07 PM - Getting EWF config parameters from registry.

12:35:07 PM - Non El Torito disk configuration.

12:35:07 PM - EWF Partition Size = 0 (KBytes), Levels = 1, Volumes =
1.

12:35:07 PM - Protected Volume Config #0 :

12:35:07 PM - Disk= 0,Part= 1,DiskType= IDE,Type= RAM.

12:35:08 PM - Enable= Disabled, Optimize= 0, LazyWrite= N.

12:35:08 PM - Found 1 Hard Disks.

12:35:08 PM - Deleting EWF Partition #0, disk#=0, type=69

12:35:08 PM - Disk #0 layout info:

12:35:08 PM - PRIMARY partition,start=0x0000000000004000,
len=0x000000000dbfc000, type= 6

12:35:08 PM - FREE partition,start=0x000000000dc00000,
len=0x0000000001c80000, type= 0

12:35:08 PM - Allocating EWF in PRIMARY partition,
start=0x000000000dc00000, len=0x0000000000008000.

12:35:10 PM - Created EWF partition on Disk = 0, partition = 0,size =
0x0000000000008000 .

12:35:10 PM - Can't create EWF partition on disk0/partition0.

12:35:10 PM - ConfigureEwf() End, status = 0x0.


Thanks in advance,

Giggsy

Giggsy,

You can use Registry configured RAM EWF please read about it in product documentation.
Or download my component from www.xpefiles.com

On second question: If you have enough memory and this message annoy you then read:
http://msdn.microsoft.com/embedded/c...s/default.aspx

Regards,
Slobodan

"Giggsy" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> Hi all,
>
> I have a problem with EWF & Compact Flash. It seems that it can't be
> created, as you can see in the logfile.
> Please can someone help my to solve this problem.
>
> The image works fine but after some time I get an error about "out of
> virtual memory". I don't know what caused this error. Can someone
> explain to my what caused this error and how to solve it.
>
> the configuration of EWF I'm set:
>
> Maximum Number of Protected Volumes : 1
> Maximum Number of Overlay Levels : 1
> EWF Partition Size in KBytes : 0
>
> Protected Volume # 1
> Start EWF Enabled : Unchecked
> Enable Lazy Write : Unchecked
> Disk Number : 0
> Partition Number : 1
> Disk Type : IDE
> Overlay Type : RAM
> Optimization Option : Optimal Peformance
>
> This is a part of my FBA logfile:
>
> 12:35:07 PM - ConfigureEwf() Start.
>
> 12:35:07 PM - Getting EWF config parameters from registry.
>
> 12:35:07 PM - Non El Torito disk configuration.
>
> 12:35:07 PM - EWF Partition Size = 0 (KBytes), Levels = 1, Volumes =
> 1.
>
> 12:35:07 PM - Protected Volume Config #0 :
>
> 12:35:07 PM - Disk= 0,Part= 1,DiskType= IDE,Type= RAM.
>
> 12:35:08 PM - Enable= Disabled, Optimize= 0, LazyWrite= N.
>
> 12:35:08 PM - Found 1 Hard Disks.
>
> 12:35:08 PM - Deleting EWF Partition #0, disk#=0, type=69
>
> 12:35:08 PM - Disk #0 layout info:
>
> 12:35:08 PM - PRIMARY partition,start=0x0000000000004000,
> len=0x000000000dbfc000, type= 6
>
> 12:35:08 PM - FREE partition,start=0x000000000dc00000,
> len=0x0000000001c80000, type= 0
>
> 12:35:08 PM - Allocating EWF in PRIMARY partition,
> start=0x000000000dc00000, len=0x0000000000008000.
>
> 12:35:10 PM - Created EWF partition on Disk = 0, partition = 0,size =
> 0x0000000000008000 .
>
> 12:35:10 PM - Can't create EWF partition on disk0/partition0.
>
> 12:35:10 PM - ConfigureEwf() End, status = 0x0.
>
>
> Thanks in advance,
>
> Giggsy
>