PC Review


Reply
Thread Tools Rate Thread

Comp starts w/o pressing start button

 
 
MisterSkippy
Guest
Posts: n/a
 
      18th Apr 2005
The last couple of days my comp has booted up as soon as I switch on
the power center without the need to press the start button on the
case. It shuts down fine. In the past I always had to turn on the
power center then press the start button on the front of the case.
It's no big deal and the comp runs fine, but I was wondering what
might have caused the change. I haven't been into the bios ever or
added/deleted any programs recently. Virus/spyware scans show nothing.
Any ideas would be most welcome.
TIA
DFB
 
Reply With Quote
 
 
 
 
Galen
Guest
Posts: n/a
 
      19th Apr 2005
In news:(E-Mail Removed),
MisterSkippy <(E-Mail Removed)> had this to say:

My reply is at the bottom of your sent message:

> The last couple of days my comp has booted up as soon as I switch on
> the power center without the need to press the start button on the
> case. It shuts down fine. In the past I always had to turn on the
> power center then press the start button on the front of the case.
> It's no big deal and the comp runs fine, but I was wondering what
> might have caused the change. I haven't been into the bios ever or
> added/deleted any programs recently. Virus/spyware scans show nothing.
> Any ideas would be most welcome.
> TIA
> DFB


Do you route your CAT5 cable through the surge protector? If so in your BIOS
do you have it set to Wake On LAN?

Galen
--
Signature changed for a moment of silence.
Rest well Alex and we'll see you on the other side.


 
Reply With Quote
 
MisterSkippy
Guest
Posts: n/a
 
      19th Apr 2005
On Mon, 18 Apr 2005 19:21:01 -0400, "Galen" <(E-Mail Removed)>
wrote:

>In news:(E-Mail Removed),
>MisterSkippy <(E-Mail Removed)> had this to say:
>
> My reply is at the bottom of your sent message:
>
>> The last couple of days my comp has booted up as soon as I switch on
>> the power center without the need to press the start button on the
>> case. It shuts down fine. In the past I always had to turn on the
>> power center then press the start button on the front of the case.
>> It's no big deal and the comp runs fine, but I was wondering what
>> might have caused the change. I haven't been into the bios ever or
>> added/deleted any programs recently. Virus/spyware scans show nothing.
>> Any ideas would be most welcome.
>> TIA
>> DFB

>
>Do you route your CAT5 cable through the surge protector? If so in your BIOS
>do you have it set to Wake On LAN?
>
>Galen

Thanks for the fast response. Cat5 goes from modem to router to NIC
connector on MB and does not go through surge protector. BIOS is not
set to wake on LAN.
 
Reply With Quote
 
Galen
Guest
Posts: n/a
 
      19th Apr 2005
In news:(E-Mail Removed),
MisterSkippy <(E-Mail Removed)> had this to say:

My reply is at the bottom of your sent message:

> Thanks for the fast response. Cat5 goes from modem to router to NIC
> connector on MB and does not go through surge protector. BIOS is not
> set to wake on LAN.


Then your surge protector may have been hit with a spike and though it will
probably still appear to be functioning it may not be. When you're hitting
the power button (it didn't do this in the past and only recently started?)
there really should NOT be a spike in power but there probably is and that's
likely what's turning the PC on. Unplug the protector ASAP and try a
different one in there. I'd recommend a new one. They should be replaced
over time anyhow. Most of them make great claims about protecting you (and
indeed they do) but a majority of them (if I understand the techno mumble
jumbo correctly) will still appear to be working and protecting you even
after they've been hit with a major spike while in truth they will not
withstand another spike and probably aren't functioning properly even after
the first one. I'd try it with another one and see if that clears up the
problem. If it does then delegate the surge protector to a task less
important than that of protecting your PC or just heave it to the bin.

This is one area where I tend to try to get the best that I can afford. I
use a battery backup system and that is actually protected through a
house-wide surge protection unit. (I have part of my energy supplied by the
Sun and when it kicks over from one to the other there was a rather large
surge going through the house so the electrician installed a rather nifty
box that cost too much and does things that I'm not even really sure about.
It has neat LEDs and lights and buttons and stuff. I don't actually play
with it and I've never even read the manual. I've been informed that it's a
decent product though and trust the electrician's judgement on it.) Even
with all of this I still have my systems surge protected.

I'd go ahead and try a different protector. Then again, in some BIOS setup
utilities there's a resume state feature and maybe when you shut the power
off it thinks that the PC was on so it's trying to turn the PC back on
because it thinks that was the last system state? That's a big stretch
though but I suppose it's a possibility. I'd really try a replacement. Many
of them have good long warranties that few people ever take advantage of.

Galen
--
Signature changed for a moment of silence.
Rest well Alex and we'll see you on the other side.


 
Reply With Quote
 
MisterSkippy
Guest
Posts: n/a
 
      20th Apr 2005
On Mon, 18 Apr 2005 20:24:16 -0400, "Galen" <(E-Mail Removed)>
wrote:

>In news:(E-Mail Removed),
>MisterSkippy <(E-Mail Removed)> had this to say:
>
> My reply is at the bottom of your sent message:
>
>> Thanks for the fast response. Cat5 goes from modem to router to NIC
>> connector on MB and does not go through surge protector. BIOS is not
>> set to wake on LAN.

>
>Then your surge protector may have been hit with a spike and though it will
>probably still appear to be functioning it may not be. When you're hitting
>the power button (it didn't do this in the past and only recently started?)
>there really should NOT be a spike in power but there probably is and that's
>likely what's turning the PC on. Unplug the protector ASAP and try a
>different one in there. I'd recommend a new one. They should be replaced
>over time anyhow. Most of them make great claims about protecting you (and
>indeed they do) but a majority of them (if I understand the techno mumble
>jumbo correctly) will still appear to be working and protecting you even
>after they've been hit with a major spike while in truth they will not
>withstand another spike and probably aren't functioning properly even after
>the first one. I'd try it with another one and see if that clears up the
>problem. If it does then delegate the surge protector to a task less
>important than that of protecting your PC or just heave it to the bin.
>
>This is one area where I tend to try to get the best that I can afford. I
>use a battery backup system and that is actually protected through a
>house-wide surge protection unit. (I have part of my energy supplied by the
>Sun and when it kicks over from one to the other there was a rather large
>surge going through the house so the electrician installed a rather nifty
>box that cost too much and does things that I'm not even really sure about.
>It has neat LEDs and lights and buttons and stuff. I don't actually play
>with it and I've never even read the manual. I've been informed that it's a
>decent product though and trust the electrician's judgement on it.) Even
>with all of this I still have my systems surge protected.
>
>I'd go ahead and try a different protector. Then again, in some BIOS setup
>utilities there's a resume state feature and maybe when you shut the power
>off it thinks that the PC was on so it's trying to turn the PC back on
>because it thinks that was the last system state? That's a big stretch
>though but I suppose it's a possibility. I'd really try a replacement. Many
>of them have good long warranties that few people ever take advantage of.
>
>Galen


Again, thanks for the fast response. For some reason unknown to me the
problem has seemingly resolved itself with no action on my part. I'm
thinking perhaps there is/was some dust or crud in the switch. I'll
try some compressed air on it over the weekend.
Again, thanks for the help.
Regards
DFB
 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pressing the button without... pressing the button - mouse click? efandango Microsoft Access Form Coding 2 18th Dec 2008 10:04 PM
Computer starts only by pressing F1 Hamed Windows XP General 2 30th Jan 2007 02:20 PM
Help! Right Click on Start button starts up my Adobe Reader Install Program goshgee@nowhere.com Windows XP Help 0 23rd Nov 2006 01:43 AM
pressing power button off Vs. Start -> Turn off Computer =?Utf-8?B?QW15?= Windows XP General 5 6th Sep 2006 04:37 PM
When my 2nd comp starts it kill the DSL Fernando Windows XP Networking 0 19th May 2004 03:14 AM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 10:01 AM.