PC Review


Reply
Thread Tools Rate Thread

Code 41 Message

 
 
Kristin
Guest
Posts: n/a
 
      10th Dec 2003
My DVD-ROM & CD-R/RW suddenly stopped reading disks. They
open and close, but the system doesn't seem to read them.
The device manager has yellow "!" sign by each drive and
says,"Windows successfully loaded the device driver for
this hardware but cannot find the hardware device. (Code
41)". Does anyone know what this means or how to fix it???
Please help me!!

 
Reply With Quote
 
 
 
 
Jason Tsang
Guest
Posts: n/a
 
      10th Dec 2003
Goto http://aumha.org/win5/a/xpcd.php#problems
See the second "problem" (read the caveats)
Run the provided registry patch

That should fix your problem (basically, a filter driver is missing or
non-operational, the registry patch will delete the filter drivers
references for your cdrom(s))


Basically, the reg file from above carries out the steps displayed at this
website


CD-ROM Drive or DVD-ROM Drive Missing After You Install Windows XP
http://support.microsoft.com/default...b;en-us;320553

CD-ROM Access Is Missing and Messages Cite Error Code 31, Code 32, Code 19,
or Code 39 After You Remove Easy CD Creator in Windows XP
http://support.microsoft.com/default...b;en-us;314060


[note this also fixes code 41 errors too as mentioned in the last kb article
listed]


--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Kristin" <(E-Mail Removed)> wrote in message
news:012a01c3bf4c$31fb5340$(E-Mail Removed)...
> My DVD-ROM & CD-R/RW suddenly stopped reading disks. They
> open and close, but the system doesn't seem to read them.
> The device manager has yellow "!" sign by each drive and
> says,"Windows successfully loaded the device driver for
> this hardware but cannot find the hardware device. (Code
> 41)". Does anyone know what this means or how to fix it???
> Please help me!!
>



 
Reply With Quote
 
Scott
Guest
Posts: n/a
 
      11th Dec 2003
Had the same prob when I uninstalled Clone-cd. Some
drivers in my Windows/System32/drivers folder were
deleted. I copied what I thought might be gone from the
i386 folder on the XP cd (you have to add the last letter
of the extension of each file). I don't remember exactly
what was missing, but what I replaced did the trick.
There's probably a cleaner way to do this, but I couldn't
find one! Good luck!
>-----Original Message-----
>My DVD-ROM & CD-R/RW suddenly stopped reading disks.

They
>open and close, but the system doesn't seem to read

them.
>The device manager has yellow "!" sign by each drive and
>says,"Windows successfully loaded the device driver for
>this hardware but cannot find the hardware device. (Code
>41)". Does anyone know what this means or how to fix

it???
>Please help me!!
>
>.
>

 
Reply With Quote
 
Guest
Posts: n/a
 
      12th Dec 2003
What do you mean I have to add the last letter of the
extension of each file? This make sense, because I
uninstatlled some things right before this happened, but I
don't remember what it was.


>-----Original Message-----
>Had the same prob when I uninstalled Clone-cd. Some
>drivers in my Windows/System32/drivers folder were
>deleted. I copied what I thought might be gone from the
>i386 folder on the XP cd (you have to add the last letter
>of the extension of each file). I don't remember exactly
>what was missing, but what I replaced did the trick.
>There's probably a cleaner way to do this, but I couldn't
>find one! Good luck!
>>-----Original Message-----
>>My DVD-ROM & CD-R/RW suddenly stopped reading disks.

>They
>>open and close, but the system doesn't seem to read

>them.
>>The device manager has yellow "!" sign by each drive and
>>says,"Windows successfully loaded the device driver for
>>this hardware but cannot find the hardware device. (Code
>>41)". Does anyone know what this means or how to fix

>it???
>>Please help me!!
>>
>>.
>>

>.
>

 
Reply With Quote
 
Jason Tsang
Guest
Posts: n/a
 
      12th Dec 2003
Files on the WinXP cd are compressed. You have to expand them before you
can use them. The compressed files have the last letter of their extension
replaced with an underscore so that the compressed files are somewhat
visually identifible.

Regardless, that should not be necessary for errors of this type. There are
easier solutions that I've already posted.

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

<(E-Mail Removed)> wrote in message
news:01a601c3c0cc$cc102f60$(E-Mail Removed)...
> What do you mean I have to add the last letter of the
> extension of each file? This make sense, because I
> uninstatlled some things right before this happened, but I
> don't remember what it was.
>
>
> >-----Original Message-----
> >Had the same prob when I uninstalled Clone-cd. Some
> >drivers in my Windows/System32/drivers folder were
> >deleted. I copied what I thought might be gone from the
> >i386 folder on the XP cd (you have to add the last letter
> >of the extension of each file). I don't remember exactly
> >what was missing, but what I replaced did the trick.
> >There's probably a cleaner way to do this, but I couldn't
> >find one! Good luck!
> >>-----Original Message-----
> >>My DVD-ROM & CD-R/RW suddenly stopped reading disks.

> >They
> >>open and close, but the system doesn't seem to read

> >them.
> >>The device manager has yellow "!" sign by each drive and
> >>says,"Windows successfully loaded the device driver for
> >>this hardware but cannot find the hardware device. (Code
> >>41)". Does anyone know what this means or how to fix

> >it???
> >>Please help me!!
> >>
> >>.
> >>

> >.
> >



 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
code for message box NAS Microsoft Access 2 8th Oct 2009 02:39 PM
Code on Message =?Utf-8?B?YWNzcw==?= Microsoft Access VBA Modules 3 29th Jun 2007 01:50 PM
Help with message box code =?Utf-8?B?RWxlYW5vciBvZiBBcXVpdGFpbmU=?= Microsoft Access Form Coding 3 11th Nov 2006 06:25 AM
Message Box Code Help =?Utf-8?B?QkRQSUlJ?= Microsoft Access Form Coding 2 26th Oct 2006 07:31 PM
Help with Message box code Tony Williams Microsoft Access Form Coding 2 27th Jun 2006 04:54 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 09:10 PM.