PC Review


Reply
Thread Tools Rate Thread

Will changing MB & CPU invalidate OEM license/key?

 
 
Ben Bowen
Guest
Posts: n/a
 
      4th Sep 2008
Hi all. I'm having some overheating problems with my PC running OEM
XP. I'd like to change the MB and CPU to something a bit newer to get
rid of this problem, but I don't know if XP will recognize the change
and invalidate the license/key.

Any advise?

Thanks
 
Reply With Quote
 
 
 
 
Colon Terminus
Guest
Posts: n/a
 
      4th Sep 2008
"Ben Bowen" <(E-Mail Removed)> wrote in message
news:84e80139-7355-4050-a704-(E-Mail Removed)...
> Hi all. I'm having some overheating problems with my PC running OEM
> XP. I'd like to change the MB and CPU to something a bit newer to get
> rid of this problem, but I don't know if XP will recognize the change
> and invalidate the license/key.
>
> Any advise?
>
> Thanks



My personal experience is ... Yes.
If you proceed, you will have to purchase a new license.
Been there ... done that.



--
Posted via NewsDemon.com - Premium Uncensored Newsgroup Service
------->>>>>>http://www.NewsDemon.com<<<<<<------
Unlimited Access, Anonymous Accounts, Uncensored Broadband Access
 
Reply With Quote
 
Bruce Chambers
Guest
Posts: n/a
 
      4th Sep 2008
Ben Bowen wrote:
> Hi all. I'm having some overheating problems with my PC running OEM
> XP. I'd like to change the MB and CPU to something a bit newer to get
> rid of this problem, but I don't know if XP will recognize the change
> and invalidate the license/key.
>
> Any advise?
>
> Thanks



The answer depends entirely upon the specific type of OEM installation
CD you have. If you have a generic, unbranded OEM installation CD, you
might not have too many problems. If, on the other hand, you have a
brand-specific "Recovery" CD, it most likely will not work at all on the
new hardware.

Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific motherboard chipset and
therefore are *not* transferable to a new motherboard - check yours
before starting), unless the new motherboard is virtually identical
(same chipset, same IDE controllers, same BIOS version, etc.) to the one
on which the WinXP installation was originally performed, you'll need to
perform a repair (a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directo...;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.



--

Bruce Chambers

Help us help you:
http://www.catb.org/~esr/faqs/smart-questions.html

http://support.microsoft.com/default.aspx/kb/555375

They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot
 
Reply With Quote
 
Alias
Guest
Posts: n/a
 
      4th Sep 2008
Ben Bowen wrote:
> Hi all. I'm having some overheating problems with my PC running OEM
> XP. I'd like to change the MB and CPU to something a bit newer to get
> rid of this problem, but I don't know if XP will recognize the change
> and invalidate the license/key.
>
> Any advise?
>
> Thanks


What kind of XP OEM do you have?

Alias
 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing License Key Ac Windows Vista Administration 1 26th Mar 2008 07:27 PM
Changing the LICENSE name royce Microsoft Word Document Management 1 27th Oct 2007 01:16 PM
changing License's =?Utf-8?B?TWFyaw==?= Microsoft Windows 2000 Terminal Server Applications 2 5th Jan 2006 03:50 PM
Re: changing license #s Tim Windows XP Setup 0 13th Nov 2003 04:11 PM
Changing License Qty Matthew Harris [MVP] Microsoft Windows 2000 Terminal Server Applications 0 22nd Jul 2003 06:07 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 04:02 PM.