Two issues: first, I make changes locally and then publish. The date/time
stamp changes on the remote file so I am pretty sure the file was transferred
ok, BUT the changes don't show up when I look at the website.

Second, I have a Link Bar that show perfectly on my local machine and shows
perfectly when I preview in a browser. But, it doesn't show when I publish
it.

Are these two issues connected? I am debating just deleting everything on
the server and reloading but I am not sure that will help.

Any thoughts???

Thanks,

Bob

Have you done a complete/full publish of the site to the live/remote server?

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================

"BobH" <(E-Mail Removed)> wrote in message
news:E716B79B-1DC9-4B51-A6B3-(E-Mail Removed)...
> Two issues: first, I make changes locally and then publish. The date/time
> stamp changes on the remote file so I am pretty sure the file was transferred
> ok, BUT the changes don't show up when I look at the website.
>
> Second, I have a Link Bar that show perfectly on my local machine and shows
> perfectly when I preview in a browser. But, it doesn't show when I publish
> it.
>
> Are these two issues connected? I am debating just deleting everything on
> the server and reloading but I am not sure that will help.
>
> Any thoughts???
>
> Thanks,
>
> Bob

Have you cleared out your browser temp files and windows temp files?
--
===
Tom "Pepper" Willett
Microsoft MVP - FrontPage
---
About FrontPage 2003:
http://office.microsoft.com/home/off...tid=FX01085802
How to ask a newsgroup question:
http://support.microsoft.com/kb/555375
===
"BobH" <(E-Mail Removed)> wrote in message
news:79BCC9E4-A102-4348-A53A-(E-Mail Removed)...
| More information:
|
| From FP I opened the remote site. I opened the page in question Index.htm
| and it showd just fine in design and preview mode. But, when I previewed
in
| a browser my LinkBar did not show. This is bizarre.
|
| Bob
|
|
|
| "BobH" wrote:
|
| > Two issues: first, I make changes locally and then publish. The
date/time
| > stamp changes on the remote file so I am pretty sure the file was
transferred
| > ok, BUT the changes don't show up when I look at the website.
| >
| > Second, I have a Link Bar that show perfectly on my local machine and
shows
| > perfectly when I preview in a browser. But, it doesn't show when I
publish
| > it.
| >
| > Are these two issues connected? I am debating just deleting everything
on
| > the server and reloading but I am not sure that will help.
| >
| > Any thoughts???
| >
| > Thanks,
| >
| > Bob

I have similar problem. I actually make updates LIVE on the site and when I
go back to browse, the changes do not take, or so it seems. I refresh, clear
cahce, delte temp files, old page keeps showing up.

The interesting thing is, I can go to another machine, and the updates show
up.

On the machine with the problems, I use Firefox and IE, both have the same
problem. It has now been 3 days since updates were made and I still can't see
them on this machine when browsing. The address bar shows that I am pointing
to the site and not somewhere on my local machine. In fact, I deleted all
the local files.

I have this problem with two separate websites hosted by two separate
providers.

"Thomas A. Rowe" wrote:

> Have you done a complete/full publish of the site to the live/remote server?
>
> --
> ==============================================
> Thomas A. Rowe (Microsoft MVP - FrontPage)
> ==============================================
> If you feel your current issue is a results of installing
> a Service Pack or security update, please contact
> Microsoft Product Support Services:
> http://support.microsoft.com
> If the problem can be shown to have been caused by a
> security update, then there is usually no charge for the call.
> ==============================================
>
> "BobH" <(E-Mail Removed)> wrote in message
> news:E716B79B-1DC9-4B51-A6B3-(E-Mail Removed)...
> > Two issues: first, I make changes locally and then publish. The date/time
> > stamp changes on the remote file so I am pretty sure the file was transferred
> > ok, BUT the changes don't show up when I look at the website.
> >
> > Second, I have a Link Bar that show perfectly on my local machine and shows
> > perfectly when I preview in a browser. But, it doesn't show when I publish
> > it.
> >
> > Are these two issues connected? I am debating just deleting everything on
> > the server and reloading but I am not sure that will help.
> >
> > Any thoughts???
> >
> > Thanks,
> >
> > Bob
>
>
>

By any chance are the machines with the problem using AOL??


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
...............................with a computer

"face" <(E-Mail Removed)> wrote in message
news:8631DA2E-8651-4364-AFFA-(E-Mail Removed)...
> I have similar problem. I actually make updates LIVE on the site and
when I
> go back to browse, the changes do not take, or so it seems. I refresh,
clear
> cahce, delte temp files, old page keeps showing up.
>
> The interesting thing is, I can go to another machine, and the updates
show
> up.
>
> On the machine with the problems, I use Firefox and IE, both have the
same
> problem. It has now been 3 days since updates were made and I still
can't see
> them on this machine when browsing. The address bar shows that I am
pointing
> to the site and not somewhere on my local machine. In fact, I deleted
all
> the local files.
>
> I have this problem with two separate websites hosted by two separate
> providers.
>
> "Thomas A. Rowe" wrote:
>
> > Have you done a complete/full publish of the site to the live/remote
server?
> >
> > --
> > ==============================================
> > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > ==============================================
> > If you feel your current issue is a results of installing
> > a Service Pack or security update, please contact
> > Microsoft Product Support Services:
> > http://support.microsoft.com
> > If the problem can be shown to have been caused by a
> > security update, then there is usually no charge for the call.
> > ==============================================
> >
> > "BobH" <(E-Mail Removed)> wrote in message
> > news:E716B79B-1DC9-4B51-A6B3-(E-Mail Removed)...
> > > Two issues: first, I make changes locally and then publish. The
date/time
> > > stamp changes on the remote file so I am pretty sure the file was
transferred
> > > ok, BUT the changes don't show up when I look at the website.
> > >
> > > Second, I have a Link Bar that show perfectly on my local machine
and shows
> > > perfectly when I preview in a browser. But, it doesn't show when
I publish
> > > it.
> > >
> > > Are these two issues connected? I am debating just deleting
everything on
> > > the server and reloading but I am not sure that will help.
> > >
> > > Any thoughts???
> > >
> > > Thanks,
> > >
> > > Bob
> >
> >
> >

No AOL.

"Steve Easton" wrote:

> By any chance are the machines with the problem using AOL??
>
>
> --
> Steve Easton
> Microsoft MVP FrontPage
> 95isalive
> This site is best viewed..................
> ...............................with a computer
>
> "face" <(E-Mail Removed)> wrote in message
> news:8631DA2E-8651-4364-AFFA-(E-Mail Removed)...
> > I have similar problem. I actually make updates LIVE on the site and
> when I
> > go back to browse, the changes do not take, or so it seems. I refresh,
> clear
> > cahce, delte temp files, old page keeps showing up.
> >
> > The interesting thing is, I can go to another machine, and the updates
> show
> > up.
> >
> > On the machine with the problems, I use Firefox and IE, both have the
> same
> > problem. It has now been 3 days since updates were made and I still
> can't see
> > them on this machine when browsing. The address bar shows that I am
> pointing
> > to the site and not somewhere on my local machine. In fact, I deleted
> all
> > the local files.
> >
> > I have this problem with two separate websites hosted by two separate
> > providers.
> >
> > "Thomas A. Rowe" wrote:
> >
> > > Have you done a complete/full publish of the site to the live/remote
> server?
> > >
> > > --
> > > ==============================================
> > > Thomas A. Rowe (Microsoft MVP - FrontPage)
> > > ==============================================
> > > If you feel your current issue is a results of installing
> > > a Service Pack or security update, please contact
> > > Microsoft Product Support Services:
> > > http://support.microsoft.com
> > > If the problem can be shown to have been caused by a
> > > security update, then there is usually no charge for the call.
> > > ==============================================
> > >
> > > "BobH" <(E-Mail Removed)> wrote in message
> > > news:E716B79B-1DC9-4B51-A6B3-(E-Mail Removed)...
> > > > Two issues: first, I make changes locally and then publish. The
> date/time
> > > > stamp changes on the remote file so I am pretty sure the file was
> transferred
> > > > ok, BUT the changes don't show up when I look at the website.
> > > >
> > > > Second, I have a Link Bar that show perfectly on my local machine
> and shows
> > > > perfectly when I preview in a browser. But, it doesn't show when
> I publish
> > > > it.
> > > >
> > > > Are these two issues connected? I am debating just deleting
> everything on
> > > > the server and reloading but I am not sure that will help.
> > > >
> > > > Any thoughts???
> > > >
> > > > Thanks,
> > > >
> > > > Bob
> > >
> > >
> > >
>
>
>