XP SP2
Computer boots off Adaptec 2940UW.

I needed to give another PC my adaptor in a hurry, and later, when I had
one, installed a replacement 2940UW in its place (same PCI slot).
The SCSI HDD ID is still the same. But I have no idea what the old card's
BIOS version was - whether they're the same.

The PC boots but XP won't completely start. It appears to flash a blue
screen then reboot the PC. Options such as safe mode and last known good
don't get it up.

Can I recover it without reinstalling? I found Q198859, but it refers to
changing SCSI types while I'm using what should already be identical
hardware.

--
Dave Harry

It's ok now.

Using that procedure, Bart PE and regedit, I managed to convince it that it
had a _different_ adapter in there, then was able to add my [original/new]
card with device manager, like in the KB.

Ta anyway...

--
Dave Harry


"Dave Harry" <(E-Mail Removed)> wrote in
message news:(E-Mail Removed)...
> XP SP2
> Computer boots off Adaptec 2940UW.
>
> I needed to give another PC my adaptor in a hurry, and later, when I had
> one, installed a replacement 2940UW in its place (same PCI slot).
> The SCSI HDD ID is still the same. But I have no idea what the old card's
> BIOS version was - whether they're the same.
>
> The PC boots but XP won't completely start. It appears to flash a blue
> screen then reboot the PC. Options such as safe mode and last known good
> don't get it up.
>
> Can I recover it without reinstalling? I found Q198859, but it refers to
> changing SCSI types while I'm using what should already be identical
> hardware.
>
> --
> Dave Harry
>