From Fujitsu FMV Boot Error Message List
http://www.fmworld.net/biz/fmv/suppo.../h_bios18.html
(this is Fujitsu japanese Site - by japanese language)
Preboot Execution Environment Error,
LAN Cable Connection Failure,
Please reconnect your LAN Cable.
also
from Intel Pro 100 NIC,
when no Network boot OS are not installed it display message.
otherwaise
If you currently use a 40-pin conductor, get an 80-pin conductor IDE cable instead
also how many Hard disk drive do you have?
If just one, connect each one separate channel.
Hard disk drive primary, CD secondary
"Charu" <(E-Mail Removed)> wrote in message news:03de01c3bdf1$bc9e6110$(E-Mail Removed)...
> Hello,
>
> I have a Windows 2000 PC, Pentium 4 IMB Intellistation E
> Pro computer. I tried to replace my old CD-ROM drive (it's
> a Lite-On LTN-403S) with a new one, and now my OS refuses
> to boot up, with the following error:
>
> ==========================
> PXE-E61: Media test failure, check cable
> PXE-MOF: Exiting Intel PXE ROM
> 1962: No operating system found. Press F1 to repeat boot
> sequence
> ==========================
>
> 1) I tried changing the boot sequence to be Hard drive,
> CDROM, Removable, Network. That didn't work. Same error
> message.
>
> 2) I tried setting the HDD to 'Master' mode and CDROM
> drive to 'Slave' mode. Windows 2000 seems to come up now,
> but not consistently. It comes up, say 1 in 4 times, and
> the other 3 times, it gives me the same error message as
> above. Why is it getting so confused? Either it finds the
> hard disk or it doesn't, right?
>
> In the case that it does come up, it doesn't last. If the
> computer is idle for some time, it just sort of "hangs"
> and doesn't respond and forces me to shut down power
> manually.
>
> I need to sort this problem out first, before moving on to
> loading drivers for my CD-ROM drive. Any ideas?? Pls. let
> me know if you need more info. on my system config.