This driver has fan control.

http://ati.amd.com/support/driver.HTML

On Thu, 16 Oct 2008 11:42:20 GMT, Rotten Ronny <(E-Mail Removed)>
wrote:

>This driver has fan control.
>
>http://ati.amd.com/support/driver.HTML

I wonder if it'll require another couple of hundred MB's of memory to
support this 'feature'?


-
steve <AT> steveevans <DOT> org
-

"Rotten Ronny" <(E-Mail Removed)> schreef in bericht
news:Xns9B392FE5C77BC67790324@127.0.0.1...
> This driver has fan control.
>
> http://ati.amd.com/support/driver.HTML

Hi RR
Triggered by your message I downloaded and installed the
Catalyst 8.10 for my club 3d 4850 on a A8N-SLI with AMD 3500+

The good news is that with manual fan control set to 50 %
the idle temp goes from 79 degr Celsius to 52 degr Celsius
while temp under load keeps below 60

The bad news is that it keeps crashing my computer when
running Flight Simullator 9.1
So I went back to Catalyst 8.9 and no crashing anymore
but very high GPU temps again :-(

See you, Jan

On Tue, 21 Oct 2008 18:41:14 -0400, "First of One" <root@127.0.0.1>
wrote:

:>Interestingly, all drivers Cat 8.9 and up fail to detect my X1900XT
:>Crossfire cable about half the time at bootup. Cat 8.8 works just fine.
:>Looks like the Quad CrossfireX overclocking introduced in 8.9 broke
:>something...

Do those use an external Xfire connection or internal? I've got 2
X1950Pro cards with the internal bridges in one of my computers and
I've had no issues with either 8.9 or 8.10.

Possibly a failing or loose cable?

me/2

"Jan Arkesteijn" <(E-Mail Removed)> wrote in message
news:48fc2eea$0$27221$(E-Mail Removed)...
> The bad news is that it keeps crashing my computer when
> running Flight Simullator 9.1

I have FS9 but haven't tried to run it since installing 8.10. Will try it
later and see what's up.

"Rod at Orpheusmail" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Followed this up but here wasn't a driver available for my card - a
> Sapphire
> HD2600 Pro AGP. There was one for XP Professional Radeon HD2600 (PCIe) but
> not for AGP.
> So, the question is ... what driver should I use?
> Any help would be much appreciated.
>
> Kind regards,
> Rod

The ATI drivers for Radeon cards are supposed to be backwards compatible so
I would just download the one that says 8.10 for any card. 2600PCIE will do
but it should be exactly the same as the one for 4870.