Is the CAT 5e Crossover cable the correct one to use to network an additional computer (connect physically) to the primary computer sitting next to it? Both computers have Ethernet connections. Sorry to be so dense, but I get a bit lost when reading the cable descriptions on the package and don't want to open it if I've brought home the wrong cable. The end plugs are RJ45 male/male.

I want to use the second computer for dedicated video work and don't want it to always be connected to the network and internet. I just need to connect occasionally to update XP and program files, then disconnect it from the network. Will this cable work for my intended purpose?

As always, thank you for your advice and suggestions.

--


~Mary
mleek at arkwest dot com
mmleek at hotmail dot com

Mary Fowler Leek <(E-Mail Removed)> wrote:
> Is the CAT 5e Crossover
cable the correct one to use to network an additional computer (connect
physically) to the primary computer sitting next to it? Both computers
have Ethernet connections. Sorry to be so dense, but I get a bit lost when
reading the cable descriptions on the package and don't want to open it if
I've brought home the wrong cable. The end plugs are RJ45 male/male.

Yes, a crossover cable is required to DIRECTLY connect 2 PC's ethernet
cards without using a router/hub/switch. It is an acceptable way to make
a quick and dirty connection, tho you will need to manually configure each
machine's network settings (ip, dns, etc).

Cross-over cables are used to connect ONE PC directly to another PC, without
using a hub/switch/router. You should consider getting a broadband router
and two standard CAT 5e cable (straight through).


"Mary Fowler Leek" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Is the CAT 5e Crossover cable the correct one to use to network an
additional computer (connect physically) to the primary computer sitting
next to it? Both computers have Ethernet connections. Sorry to be so dense,
but I get a bit lost when reading the cable descriptions on the package and
don't want to open it if I've brought home the wrong cable. The end plugs
are RJ45 male/male.

I want to use the second computer for dedicated video work and don't want it
to always be connected to the network and internet. I just need to connect
occasionally to update XP and program files, then disconnect it from the
network. Will this cable work for my intended purpose?

As always, thank you for your advice and suggestions.

--


~Mary
mleek at arkwest dot com
mmleek at hotmail dot com

Yves,

Thank you. I do have a broadband router so will return this cable for the straight through cable(s), as you suggest. Do I understand you correctly, that I will need two of them?

Mary

"Yves Leclerc" <(E-Mail Removed)> wrote in message news:%(E-Mail Removed)...
: Cross-over cables are used to connect ONE PC directly to another PC, without
: using a hub/switch/router. You should consider getting a broadband router
: and two standard CAT 5e cable (straight through).
:
:
: "Mary Fowler Leek" <(E-Mail Removed)> wrote in message
: news:(E-Mail Removed)...
: Is the CAT 5e Crossover cable the correct one to use to network an
: additional computer (connect physically) to the primary computer sitting
: next to it? Both computers have Ethernet connections. Sorry to be so dense,
: but I get a bit lost when reading the cable descriptions on the package and
: don't want to open it if I've brought home the wrong cable. The end plugs
: are RJ45 male/male.
:
: I want to use the second computer for dedicated video work and don't want it
: to always be connected to the network and internet. I just need to connect
: occasionally to update XP and program files, then disconnect it from the
: network. Will this cable work for my intended purpose?
:
: As always, thank you for your advice and suggestions.
:
: --
:
:
: ~Mary
: mleek at arkwest dot com
: mmleek at hotmail dot com

<(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
: Mary Fowler Leek <(E-Mail Removed)> wrote:
: > Is the CAT 5e Crossover
: cable the correct one to use to network an additional computer (connect
: physically) to the primary computer sitting next to it? Both computers
: have Ethernet connections. Sorry to be so dense, but I get a bit lost when
: reading the cable descriptions on the package and don't want to open it if
: I've brought home the wrong cable. The end plugs are RJ45 male/male.
:
: Yes, a crossover cable is required to DIRECTLY connect 2 PC's ethernet
: cards without using a router/hub/switch. It is an acceptable way to make
: a quick and dirty connection, tho you will need to manually configure each
: machine's network settings (ip, dns, etc).

Oops, I don't want to have to get into configuring the settings for each machine. A follow-up post suggested getting a straight through cable when using a broadband router, which I do have. I think, for me, that will be a simpler method to use. My thanks to you for your quick and thorough explanation. All you guys are so helpful on this board.

Mary

Yes! You need two cables! One for each PC and if your is set to assign IP
addresses to the PCs automatically (known as DHCP services) then you would
normally have "very little" to configure. The only thign you would need to
set up if "file sharing" and which folders.


"Mary Fowler Leek" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Yves,

Thank you. I do have a broadband router so will return this cable for the
straight through cable(s), as you suggest. Do I understand you correctly,
that I will need two of them?

Mary

"Yves Leclerc" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
: Cross-over cables are used to connect ONE PC directly to another PC,
without
: using a hub/switch/router. You should consider getting a broadband router
: and two standard CAT 5e cable (straight through).
:
:
: "Mary Fowler Leek" <(E-Mail Removed)> wrote in message
: news:(E-Mail Removed)...
: Is the CAT 5e Crossover cable the correct one to use to network an
: additional computer (connect physically) to the primary computer sitting
: next to it? Both computers have Ethernet connections. Sorry to be so
dense,
: but I get a bit lost when reading the cable descriptions on the package
and
: don't want to open it if I've brought home the wrong cable. The end plugs
: are RJ45 male/male.
:
: I want to use the second computer for dedicated video work and don't want
it
: to always be connected to the network and internet. I just need to connect
: occasionally to update XP and program files, then disconnect it from the
: network. Will this cable work for my intended purpose?
:
: As always, thank you for your advice and suggestions.
:
: --
:
:
: ~Mary
: mleek at arkwest dot com
: mmleek at hotmail dot com