Could someone help with capturing analog to digital through my Canon M50 camcorder into MM2? I have the settings correct in the camcorder, but MM2 will only recognize the actual tape in the camcorder and not the throughput from the analog source (VHS player)

Thanks

Mark

Mark,
It is said that most of the Canon series will not do
through because MM2 will not support it.....I have heard,
however, the 60 series, might.
It is normally suggested to copy the VHS to DV tape in
camera then transfer that.

That said, though I can't clearly recall it, I did find
some information somewhere that suggested a workaround.
You might be able to reseach for that. I hadn't gotten to
that point as I don't get the output quite right for the
DV projects I have.
.....Sorry for the tease. Wish I could direct you more
quickly.

Unless the answer comes from someone else it might be
quicker, in the meantime, to just take the time to dub to
DV and capture that.

Anthony.

I had similar problems with my Sony trv33. It seems that even if you take the tape off, you cannot get the analog passthrough to work
I used a freeware tool http://windv.mourek.cz/ to do the actual capturing and did the editing in moviemaker by importing the generated type-2 avi
I can recommend windv, its free, small and doesn't require installation. There's also a program called dvio but it has no preview window.

See the MM2 Limitations section of my website... the 3rd paragraph covers
'pass-through' and gives a link to Microsoft utility which helps a lot.
--
PapaJohn
www.papajohn.org

"mcook" <(E-Mail Removed)> wrote in message
news:1CF25256-384E-4BF6-82C7-(E-Mail Removed)...
> Could someone help with capturing analog to digital through my Canon M50
camcorder into MM2? I have the settings correct in the camcorder, but MM2
will only recognize the actual tape in the camcorder and not the throughput
from the analog source (VHS player).
>
> Thanks,
>
> Mark

Which section is that? I can't locate it.

Is it under

MM2
Camcorders
Analog Video Capture
....
....
Do Amazing Things

?

--
Aloke
----
to reply by e-mail remove 123 and change invalid to com

"PapaJohn" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> See the MM2 Limitations section of my website... the 3rd paragraph covers
> 'pass-through' and gives a link to Microsoft utility which helps a lot.
> --
> PapaJohn
> www.papajohn.org
>
> "mcook" <(E-Mail Removed)> wrote in message
> news:1CF25256-384E-4BF6-82C7-(E-Mail Removed)...
> > Could someone help with capturing analog to digital through my Canon M50
> camcorder into MM2? I have the settings correct in the camcorder, but MM2
> will only recognize the actual tape in the camcorder and not the
throughput
> from the analog source (VHS player).
> >
> > Thanks,
> >
> > Mark
>
>

Sorry, forgot to say that it's on the Problem Solving > Checklist page

PapaJohn


"Aloke Prasad" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Which section is that? I can't locate it.
>
> Is it under
>
> MM2
> Camcorders
> Analog Video Capture
> ...
> ...
> Do Amazing Things
>
> ?
>
> --
> Aloke
> ----
> to reply by e-mail remove 123 and change invalid to com
>
> "PapaJohn" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > See the MM2 Limitations section of my website... the 3rd paragraph
covers
> > 'pass-through' and gives a link to Microsoft utility which helps a lot.
> > --
> > PapaJohn
> > www.papajohn.org
> >
> > "mcook" <(E-Mail Removed)> wrote in message
> > news:1CF25256-384E-4BF6-82C7-(E-Mail Removed)...
> > > Could someone help with capturing analog to digital through my Canon
M50
> > camcorder into MM2? I have the settings correct in the camcorder, but
MM2
> > will only recognize the actual tape in the camcorder and not the
> throughput
> > from the analog source (VHS player).
> > >
> > > Thanks,
> > >
> > > Mark
> >
> >
>
>