Can Some one help me to solve this problem" I try Movie Mker and Nero to
capture. They both will respond with " the capture device is being used by
another source, I must close it down" Well to my knowledge, I have nothing
else open and don't know where to begin. I have an ATI All in Wonder 128.

From what are you trying to copy?

Is this analog or digital video?

What happens when you use the ATI MultiMedia Center?

Did you read the ATI manual that came with the graphics card?
--
Cari (MS-MVP)
Printing & Imaging

In Loving Memory of our dear friend Alex Nichol MVP

"JaneyFaye" <(E-Mail Removed)> wrote in message
news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
> Can Some one help me to solve this problem" I try Movie Mker and Nero to
> capture. They both will respond with " the capture device is being used by
> another source, I must close it down" Well to my knowledge, I have
> nothing
> else open and don't know where to begin. I have an ATI All in Wonder 128.
>

Trying to capture from VCR as I have in past with movie maker and nero, but
since re-install cannot. I suppose it is analog. as for the Ati mc..I don't
have it installed , just the updated ATI All In Wonder 128 PCI driver.

"Cari (MS-MVP)" wrote:

> From what are you trying to copy?
>
> Is this analog or digital video?
>
> What happens when you use the ATI MultiMedia Center?
>
> Did you read the ATI manual that came with the graphics card?
> --
> Cari (MS-MVP)
> Printing & Imaging
>
> In Loving Memory of our dear friend Alex Nichol MVP
>
> "JaneyFaye" <(E-Mail Removed)> wrote in message
> news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
> > Can Some one help me to solve this problem" I try Movie Mker and Nero to
> > capture. They both will respond with " the capture device is being used by
> > another source, I must close it down" Well to my knowledge, I have
> > nothing
> > else open and don't know where to begin. I have an ATI All in Wonder 128.
> >
>
>
>
>

Did you update the driver before the problem occurred .. or after?
--
Cari (MS-MVP)
Printing & Imaging

In Loving Memory of our dear friend Alex Nichol MVP

"JaneyFaye" <(E-Mail Removed)> wrote in message
news:9EA63332-7DEC-489A-9DEC-(E-Mail Removed)...
> Trying to capture from VCR as I have in past with movie maker and nero,
> but
> since re-install cannot. I suppose it is analog. as for the Ati mc..I
> don't
> have it installed , just the updated ATI All In Wonder 128 PCI driver.
>
> "Cari (MS-MVP)" wrote:
>
>> From what are you trying to copy?
>>
>> Is this analog or digital video?
>>
>> What happens when you use the ATI MultiMedia Center?
>>
>> Did you read the ATI manual that came with the graphics card?
>> --
>> Cari (MS-MVP)
>> Printing & Imaging
>>
>> In Loving Memory of our dear friend Alex Nichol MVP
>>
>> "JaneyFaye" <(E-Mail Removed)> wrote in message
>> news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
>> > Can Some one help me to solve this problem" I try Movie Mker and Nero
>> > to
>> > capture. They both will respond with " the capture device is being used
>> > by
>> > another source, I must close it down" Well to my knowledge, I have
>> > nothing
>> > else open and don't know where to begin. I have an ATI All in Wonder
>> > 128.
>> >
>>
>>
>>
>>
>

You may want to test by rebooting into Safe Mode | Control Panel |
Add/Remove all the software and hardware connected to ATI then reboot and
make sure the folder is deleted with windows explorer: C:\Program
Files\AtiFiles, etc

Then reinstall everything and reboot even if it does not request a reboot.

You will find much more info at:
http://mvp.support.microsoft.com/
=======================================
Regards, Gary 'Doc' Adams in Louisiana @ 314.479.8201

(E-Mail Removed)EMOVE
http://computerteachers.digital-mall-online.com/
~ Read to Learn - Write to Think ~
=======================================

"Cari (MS-MVP)" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Did you update the driver before the problem occurred .. or after?
> --
> Cari (MS-MVP)
> Printing & Imaging
>
> In Loving Memory of our dear friend Alex Nichol MVP
>
> "JaneyFaye" <(E-Mail Removed)> wrote in message
> news:9EA63332-7DEC-489A-9DEC-(E-Mail Removed)...
> > Trying to capture from VCR as I have in past with movie maker and nero,
> > but
> > since re-install cannot. I suppose it is analog. as for the Ati mc..I
> > don't
> > have it installed , just the updated ATI All In Wonder 128 PCI driver.
> >
> > "Cari (MS-MVP)" wrote:
> >
> >> From what are you trying to copy?
> >>
> >> Is this analog or digital video?
> >>
> >> What happens when you use the ATI MultiMedia Center?
> >>
> >> Did you read the ATI manual that came with the graphics card?
> >> --
> >> Cari (MS-MVP)
> >> Printing & Imaging
> >>
> >> In Loving Memory of our dear friend Alex Nichol MVP
> >>
> >> "JaneyFaye" <(E-Mail Removed)> wrote in message
> >> news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
> >> > Can Some one help me to solve this problem" I try Movie Mker and Nero
> >> > to
> >> > capture. They both will respond with " the capture device is being
used
> >> > by
> >> > another source, I must close it down" Well to my knowledge, I have
> >> > nothing
> >> > else open and don't know where to begin. I have an ATI All in Wonder
> >> > 128.
> >> >
> >>
> >>
> >>
> >>
> >
>
>
>

Thanks Cari, But I have searched every forum, every microsoft support, I have
un installed and re installed,paid for a per incident call to ATI to TALK to
someone and had to replace my hard drive yesterday. Now , everything is
fresh and I still can not capture analog with wmm nor nero. But I did find
out ind searching other forums that the proble must be wMM because there were
dozens of " whiners out there getting the same results as my self. I must
say , I got more of a response when I made my comment about " generous
Bill".. I had four come backs at once and three post down was my problem and
you were the only one to even try to address it.. Thanks every so much, but
I'm just gonna hid MM and un install nero and play like I don't have the
problem. I'm just 62 and too tired...thanks



From what are you trying to copy?

Is this analog or digital video?

What happens when you use the ATI MultiMedia Center?

Did you read the ATI manual that came with the graphics card?
--
Cari (MS-MVP)
Printing & Imaging

In Loving Memory of our dear friend Alex Nichol MVP

"JaneyFaye" <(E-Mail Removed)> wrote in message
news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
> Can Some one help me to solve this problem" I try Movie Mker and Nero to
> capture. They both will respond with " the capture device is being used by
> another source, I must close it down" Well to my knowledge, I have
> nothing
> else open and don't know where to begin. I have an ATI All in Wonder 128.
>

Windows Movie Maker is really designed for digital video not analog video.
--
Cari (MS-MVP)
Printing & Imaging

In Loving Memory of our dear friend Alex Nichol MVP

"JaneyFaye" <(E-Mail Removed)> wrote in message
news:663C0994-8495-4636-82E1-(E-Mail Removed)...
> Thanks Cari, But I have searched every forum, every microsoft support, I
> have
> un installed and re installed,paid for a per incident call to ATI to TALK
> to
> someone and had to replace my hard drive yesterday. Now , everything is
> fresh and I still can not capture analog with wmm nor nero. But I did find
> out ind searching other forums that the proble must be wMM because there
> were
> dozens of " whiners out there getting the same results as my self. I must
> say , I got more of a response when I made my comment about " generous
> Bill".. I had four come backs at once and three post down was my problem
> and
> you were the only one to even try to address it.. Thanks every so much,
> but
> I'm just gonna hid MM and un install nero and play like I don't have the
> problem. I'm just 62 and too tired...thanks
>
>
>
> From what are you trying to copy?
>
> Is this analog or digital video?
>
> What happens when you use the ATI MultiMedia Center?
>
> Did you read the ATI manual that came with the graphics card?
> --
> Cari (MS-MVP)
> Printing & Imaging
>
> In Loving Memory of our dear friend Alex Nichol MVP
>
> "JaneyFaye" <(E-Mail Removed)> wrote in message
> news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
>> Can Some one help me to solve this problem" I try Movie Mker and Nero to
>> capture. They both will respond with " the capture device is being used
>> by
>> another source, I must close it down" Well to my knowledge, I have
>> nothing
>> else open and don't know where to begin. I have an ATI All in Wonder 128.
>>
>
>
>
>
>

I have the same error message when I tired to capture analog video with my
eVGA NVTV card. Whenever I try to use WM, the error message comes up. When
I used Roxio, there were no response at all.

I am using XP Media Center with SP2 and Medai Center is working perfectly
fine. There is one interesting thing: The media center can actually detect
the video and sound from my VCR. I was using the VCR as a the cable box on
the set up. However, I couldn't finish the set up to use the VCR as I the
remote set up could not be done. Otherwise I could have record that VCR as
"Live TV".

Is that error "video source was in use" has something to do with the Media
Center? I have the latest driver from eVGA. Just don't know what else to
do. Thanks for all your help!

Norman



"Cari (MS-MVP)" wrote:

> Windows Movie Maker is really designed for digital video not analog video.
> --
> Cari (MS-MVP)
> Printing & Imaging
>
> In Loving Memory of our dear friend Alex Nichol MVP
>
> "JaneyFaye" <(E-Mail Removed)> wrote in message
> news:663C0994-8495-4636-82E1-(E-Mail Removed)...
> > Thanks Cari, But I have searched every forum, every microsoft support, I
> > have
> > un installed and re installed,paid for a per incident call to ATI to TALK
> > to
> > someone and had to replace my hard drive yesterday. Now , everything is
> > fresh and I still can not capture analog with wmm nor nero. But I did find
> > out ind searching other forums that the proble must be wMM because there
> > were
> > dozens of " whiners out there getting the same results as my self. I must
> > say , I got more of a response when I made my comment about " generous
> > Bill".. I had four come backs at once and three post down was my problem
> > and
> > you were the only one to even try to address it.. Thanks every so much,
> > but
> > I'm just gonna hid MM and un install nero and play like I don't have the
> > problem. I'm just 62 and too tired...thanks
> >
> >
> >
> > From what are you trying to copy?
> >
> > Is this analog or digital video?
> >
> > What happens when you use the ATI MultiMedia Center?
> >
> > Did you read the ATI manual that came with the graphics card?
> > --
> > Cari (MS-MVP)
> > Printing & Imaging
> >
> > In Loving Memory of our dear friend Alex Nichol MVP
> >
> > "JaneyFaye" <(E-Mail Removed)> wrote in message
> > news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
> >> Can Some one help me to solve this problem" I try Movie Mker and Nero to
> >> capture. They both will respond with " the capture device is being used
> >> by
> >> another source, I must close it down" Well to my knowledge, I have
> >> nothing
> >> else open and don't know where to begin. I have an ATI All in Wonder 128.
> >>
> >
> >
> >
> >
> >
>
>
>
>

You need to use the capture app that came with the mce rather than MM or
roxio.

--
Graham Hughes
MVP Digital Media
Laird of Glencairn
www.dvds2treasure.com
www.simplydv.com


"Norman" <(E-Mail Removed)> wrote in message
news:944A72B1-24DC-456F-ABE1-(E-Mail Removed)...
> I have the same error message when I tired to capture analog video with my
> eVGA NVTV card. Whenever I try to use WM, the error message comes up.
When
> I used Roxio, there were no response at all.
>
> I am using XP Media Center with SP2 and Medai Center is working perfectly
> fine. There is one interesting thing: The media center can actually
detect
> the video and sound from my VCR. I was using the VCR as a the cable box
on
> the set up. However, I couldn't finish the set up to use the VCR as I the
> remote set up could not be done. Otherwise I could have record that VCR
as
> "Live TV".
>
> Is that error "video source was in use" has something to do with the Media
> Center? I have the latest driver from eVGA. Just don't know what else to
> do. Thanks for all your help!
>
> Norman
>
>
>
> "Cari (MS-MVP)" wrote:
>
> > Windows Movie Maker is really designed for digital video not analog
video.
> > --
> > Cari (MS-MVP)
> > Printing & Imaging
> >
> > In Loving Memory of our dear friend Alex Nichol MVP
> >
> > "JaneyFaye" <(E-Mail Removed)> wrote in message
> > news:663C0994-8495-4636-82E1-(E-Mail Removed)...
> > > Thanks Cari, But I have searched every forum, every microsoft support,
I
> > > have
> > > un installed and re installed,paid for a per incident call to ATI to
TALK
> > > to
> > > someone and had to replace my hard drive yesterday. Now , everything
is
> > > fresh and I still can not capture analog with wmm nor nero. But I did
find
> > > out ind searching other forums that the proble must be wMM because
there
> > > were
> > > dozens of " whiners out there getting the same results as my self. I
must
> > > say , I got more of a response when I made my comment about " generous
> > > Bill".. I had four come backs at once and three post down was my
problem
> > > and
> > > you were the only one to even try to address it.. Thanks every so
much,
> > > but
> > > I'm just gonna hid MM and un install nero and play like I don't have
the
> > > problem. I'm just 62 and too tired...thanks
> > >
> > >
> > >
> > > From what are you trying to copy?
> > >
> > > Is this analog or digital video?
> > >
> > > What happens when you use the ATI MultiMedia Center?
> > >
> > > Did you read the ATI manual that came with the graphics card?
> > > --
> > > Cari (MS-MVP)
> > > Printing & Imaging
> > >
> > > In Loving Memory of our dear friend Alex Nichol MVP
> > >
> > > "JaneyFaye" <(E-Mail Removed)> wrote in message
> > > news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
> > >> Can Some one help me to solve this problem" I try Movie Mker and Nero
to
> > >> capture. They both will respond with " the capture device is being
used
> > >> by
> > >> another source, I must close it down" Well to my knowledge, I have
> > >> nothing
> > >> else open and don't know where to begin. I have an ATI All in Wonder
128.
> > >>
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >

Thanks Graham! Can you show me how to locate the app in MCE? I don't know
that you can do that in Media Center. Thanks for your help!


"Graham Hughes" wrote:

> You need to use the capture app that came with the mce rather than MM or
> roxio.
>
> --
> Graham Hughes
> MVP Digital Media
> Laird of Glencairn
> www.dvds2treasure.com
> www.simplydv.com
>
>
> "Norman" <(E-Mail Removed)> wrote in message
> news:944A72B1-24DC-456F-ABE1-(E-Mail Removed)...
> > I have the same error message when I tired to capture analog video with my
> > eVGA NVTV card. Whenever I try to use WM, the error message comes up.
> When
> > I used Roxio, there were no response at all.
> >
> > I am using XP Media Center with SP2 and Medai Center is working perfectly
> > fine. There is one interesting thing: The media center can actually
> detect
> > the video and sound from my VCR. I was using the VCR as a the cable box
> on
> > the set up. However, I couldn't finish the set up to use the VCR as I the
> > remote set up could not be done. Otherwise I could have record that VCR
> as
> > "Live TV".
> >
> > Is that error "video source was in use" has something to do with the Media
> > Center? I have the latest driver from eVGA. Just don't know what else to
> > do. Thanks for all your help!
> >
> > Norman
> >
> >
> >
> > "Cari (MS-MVP)" wrote:
> >
> > > Windows Movie Maker is really designed for digital video not analog
> video.
> > > --
> > > Cari (MS-MVP)
> > > Printing & Imaging
> > >
> > > In Loving Memory of our dear friend Alex Nichol MVP
> > >
> > > "JaneyFaye" <(E-Mail Removed)> wrote in message
> > > news:663C0994-8495-4636-82E1-(E-Mail Removed)...
> > > > Thanks Cari, But I have searched every forum, every microsoft support,
> I
> > > > have
> > > > un installed and re installed,paid for a per incident call to ATI to
> TALK
> > > > to
> > > > someone and had to replace my hard drive yesterday. Now , everything
> is
> > > > fresh and I still can not capture analog with wmm nor nero. But I did
> find
> > > > out ind searching other forums that the proble must be wMM because
> there
> > > > were
> > > > dozens of " whiners out there getting the same results as my self. I
> must
> > > > say , I got more of a response when I made my comment about " generous
> > > > Bill".. I had four come backs at once and three post down was my
> problem
> > > > and
> > > > you were the only one to even try to address it.. Thanks every so
> much,
> > > > but
> > > > I'm just gonna hid MM and un install nero and play like I don't have
> the
> > > > problem. I'm just 62 and too tired...thanks
> > > >
> > > >
> > > >
> > > > From what are you trying to copy?
> > > >
> > > > Is this analog or digital video?
> > > >
> > > > What happens when you use the ATI MultiMedia Center?
> > > >
> > > > Did you read the ATI manual that came with the graphics card?
> > > > --
> > > > Cari (MS-MVP)
> > > > Printing & Imaging
> > > >
> > > > In Loving Memory of our dear friend Alex Nichol MVP
> > > >
> > > > "JaneyFaye" <(E-Mail Removed)> wrote in message
> > > > news:1BBA2018-2F19-4715-A559-(E-Mail Removed)...
> > > >> Can Some one help me to solve this problem" I try Movie Mker and Nero
> to
> > > >> capture. They both will respond with " the capture device is being
> used
> > > >> by
> > > >> another source, I must close it down" Well to my knowledge, I have
> > > >> nothing
> > > >> else open and don't know where to begin. I have an ATI All in Wonder
> 128.
> > > >>
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
>
>
>