First attempt at using MM2 with new Sony DCRHC20E camcorder but find capture
process grinds to a halt and painfully slow. Get as far as choose file name
then video setting (click DV-AVI for trans back to tape) then after ages box
says "the device is not responding close any application that is using the
device" there are no other programmes running although Picture Package keeps
poping up uninvited which I have to click to close.
Other times it tells me there is no tape in the device when there is !!
Have turned off the USB streaming on camera and disconnected the USB cable.
There is 37 GB hard disk space free. Why is everything so very slow - a
couple of minutes between clicks, and why is the capture not working ? It
seems a great programme if it would only work. What else can I check ?
Have spent hours on this. Please help someone.
--
Eileen

You are using firewire to capture your digital video, aren't you?
--
Cari (MS-MVP) Windows Client - Printing/Imaging and Hardware
www.coribright.com

"Eileen" <(E-Mail Removed)> wrote in message
news:9DB8E7DC-6494-4E45-BE16-(E-Mail Removed)...
> First attempt at using MM2 with new Sony DCRHC20E camcorder but find
> capture
> process grinds to a halt and painfully slow. Get as far as choose file
> name
> then video setting (click DV-AVI for trans back to tape) then after ages
> box
> says "the device is not responding close any application that is using the
> device" there are no other programmes running although Picture Package
> keeps
> poping up uninvited which I have to click to close.
> Other times it tells me there is no tape in the device when there is !!
> Have turned off the USB streaming on camera and disconnected the USB
> cable.
> There is 37 GB hard disk space free. Why is everything so very slow - a
> couple of minutes between clicks, and why is the capture not working ? It
> seems a great programme if it would only work. What else can I check ?
> Have spent hours on this. Please help someone.
> --
> Eileen
>

Yes - just installed it and checking control panel there is no indication to
say it isn't working correctly. Can Moviemaker be uninstalled then downloaded
again ? can't see how to do it. I had Nero and an old Roxio programme but
uninstalled them asthey were slow also. Any clue there ? help appreciated

"Cari (MS-MVP)" wrote:

> You are using firewire to capture your digital video, aren't you?
> --
> Cari (MS-MVP) Windows Client - Printing/Imaging and Hardware
> www.coribright.com
>
> "Eileen" <(E-Mail Removed)> wrote in message
> news:9DB8E7DC-6494-4E45-BE16-(E-Mail Removed)...
> > First attempt at using MM2 with new Sony DCRHC20E camcorder but find
> > capture
> > process grinds to a halt and painfully slow. Get as far as choose file
> > name
> > then video setting (click DV-AVI for trans back to tape) then after ages
> > box
> > says "the device is not responding close any application that is using the
> > device" there are no other programmes running although Picture Package
> > keeps
> > poping up uninvited which I have to click to close.
> > Other times it tells me there is no tape in the device when there is !!
> > Have turned off the USB streaming on camera and disconnected the USB
> > cable.
> > There is 37 GB hard disk space free. Why is everything so very slow - a
> > couple of minutes between clicks, and why is the capture not working ? It
> > seems a great programme if it would only work. What else can I check ?
> > Have spent hours on this. Please help someone.
> > --
> > Eileen
> >
>
>
>
>

Let's try a deeper diagnosis..... first disconnect the camcorder completely.

Reboot the PC.

Connect the camcorder to the A/C power and then connect firewire to
camcorder and to PC. Ensure camcorder is not connected to PC with any other
cables.

Turn camcorder on and in VCR mode. You should hear a 'ding' sound from the
PC confirming connection.

A box should pop up asking what you would like to do.... choose capture via
MovieMaker...

Now tell us what happens next!
--
Cari (MS-MVP) Windows Client - Printing/Imaging and Hardware
www.coribright.com

"Eileen" <(E-Mail Removed)> wrote in message
news:E39899E6-EDAC-4854-BC54-(E-Mail Removed)...
> Yes - just installed it and checking control panel there is no indication
> to
> say it isn't working correctly. Can Moviemaker be uninstalled then
> downloaded
> again ? can't see how to do it. I had Nero and an old Roxio programme but
> uninstalled them asthey were slow also. Any clue there ? help appreciated
>
> "Cari (MS-MVP)" wrote:
>
>> You are using firewire to capture your digital video, aren't you?
>> --
>> Cari (MS-MVP) Windows Client - Printing/Imaging and Hardware
>> www.coribright.com
>>
>> "Eileen" <(E-Mail Removed)> wrote in message
>> news:9DB8E7DC-6494-4E45-BE16-(E-Mail Removed)...
>> > First attempt at using MM2 with new Sony DCRHC20E camcorder but find
>> > capture
>> > process grinds to a halt and painfully slow. Get as far as choose file
>> > name
>> > then video setting (click DV-AVI for trans back to tape) then after
>> > ages
>> > box
>> > says "the device is not responding close any application that is using
>> > the
>> > device" there are no other programmes running although Picture Package
>> > keeps
>> > poping up uninvited which I have to click to close.
>> > Other times it tells me there is no tape in the device when there is !!
>> > Have turned off the USB streaming on camera and disconnected the USB
>> > cable.
>> > There is 37 GB hard disk space free. Why is everything so very slow -
>> > a
>> > couple of minutes between clicks, and why is the capture not working ?
>> > It
>> > seems a great programme if it would only work. What else can I check ?
>> > Have spent hours on this. Please help someone.
>> > --
>> > Eileen
>> >
>>
>>
>>
>>
>