With MM2 on XP i was used to make movie and save it back
to my sony DV cam.
Since my last movie i have installed a lot of thing on my
computer.
Now, i can import and make movie but when i save on the
DV cam i have blue screen on the cam, even with a 5 sec
movie.

When i save in DV format on my HDD it works fine, but not
on my cam.

I have read and tried all tricks on papajohns web site
without success

My QASF.dll is uptodate and have no older version.

please, any idea ?

Did you try copying it from the hard drive to the camcorder with the WinDV
utility (link on the Digital Camcorders > Intro page)?
--
PapaJohn
www.papajohn.org


"lataniere" <(E-Mail Removed)> wrote in message
news:1acf01c3fbf3$23768360$(E-Mail Removed)...
> With MM2 on XP i was used to make movie and save it back
> to my sony DV cam.
> Since my last movie i have installed a lot of thing on my
> computer.
> Now, i can import and make movie but when i save on the
> DV cam i have blue screen on the cam, even with a 5 sec
> movie.
>
> When i save in DV format on my HDD it works fine, but not
> on my cam.
>
> I have read and tried all tricks on papajohns web site
> without success
>
> My QASF.dll is uptodate and have no older version.
>
> please, any idea ?

yes.
i can capture to avi on HD.
But on the other way i can't record it back on the DV CAM

The cam run in record mode perfectly but no images are
sent to it, but i see in the preview windows in windv.

any idea ?

laurent


>-----Original Message-----
>Did you try copying it from the hard drive to the
camcorder with the WinDV
>utility (link on the Digital Camcorders > Intro page)?
>--
>PapaJohn
>www.papajohn.org
>
>
>"lataniere" <(E-Mail Removed)> wrote in message
>news:1acf01c3fbf3$23768360$(E-Mail Removed)...
>> With MM2 on XP i was used to make movie and save it
back
>> to my sony DV cam.
>> Since my last movie i have installed a lot of thing on
my
>> computer.
>> Now, i can import and make movie but when i save on the
>> DV cam i have blue screen on the cam, even with a 5 sec
>> movie.
>>
>> When i save in DV format on my HDD it works fine, but
not
>> on my cam.
>>
>> I have read and tried all tricks on papajohns web site
>> without success
>>
>> My QASF.dll is uptodate and have no older version.
>>
>> please, any idea ?
>
>
>.
>

Can we assume it's a firewire connection, and you have the camcorder in
VCR/VTR mode - not record mode - and the tape is in - and DV-IN is
enabled.....etc

Seems like a setting/swich kind of thing, assuming it's the same camcorder
you successfully exported to before.

PapaJohn

"lataniere" <(E-Mail Removed)> wrote in message
news:276201c3fc93$7e7b2ea0$(E-Mail Removed)...
> yes.
> i can capture to avi on HD.
> But on the other way i can't record it back on the DV CAM
>
> The cam run in record mode perfectly but no images are
> sent to it, but i see in the preview windows in windv.
>
> any idea ?
>
> laurent
>
>
> >-----Original Message-----
> >Did you try copying it from the hard drive to the
> camcorder with the WinDV
> >utility (link on the Digital Camcorders > Intro page)?
> >--
> >PapaJohn
> >www.papajohn.org

thanks for your answers.

yes. it is the same camcorder as it works before.
same computer and same firewire link.

one of the program that i have installed since the last
time it works may have affect the codec avi to dv...

i will try now to manually desinstall MM2 and reinstall
it again
Last thing to do before réinstall winXP :-(



>-----Original Message-----
>Can we assume it's a firewire connection, and you have
the camcorder in
>VCR/VTR mode - not record mode - and the tape is in -
and DV-IN is
>enabled.....etc
>
>Seems like a setting/swich kind of thing, assuming it's
the same camcorder
>you successfully exported to before.
>
>PapaJohn
>
>"lataniere" <(E-Mail Removed)> wrote
in message
>news:276201c3fc93$7e7b2ea0$(E-Mail Removed)...
>> yes.
>> i can capture to avi on HD.
>> But on the other way i can't record it back on the DV
CAM
>>
>> The cam run in record mode perfectly but no images are
>> sent to it, but i see in the preview windows in windv.
>>
>> any idea ?
>>
>> laurent
>>
>>
>> >-----Original Message-----
>> >Did you try copying it from the hard drive to the
>> camcorder with the WinDV
>> >utility (link on the Digital Camcorders > Intro page)?
>> >--
>> >PapaJohn
>> >www.papajohn.org
>
>
>.
>

I have done a "auto-repair" of WinXP and it work now
fine !

>-----Original Message-----
>Can we assume it's a firewire connection, and you have
the camcorder in
>VCR/VTR mode - not record mode - and the tape is in -
and DV-IN is
>enabled.....etc
>
>Seems like a setting/swich kind of thing, assuming it's
the same camcorder
>you successfully exported to before.
>
>PapaJohn
>
>"lataniere" <(E-Mail Removed)> wrote
in message
>news:276201c3fc93$7e7b2ea0$(E-Mail Removed)...
>> yes.
>> i can capture to avi on HD.
>> But on the other way i can't record it back on the DV
CAM
>>
>> The cam run in record mode perfectly but no images are
>> sent to it, but i see in the preview windows in windv.
>>
>> any idea ?
>>
>> laurent
>>
>>
>> >-----Original Message-----
>> >Did you try copying it from the hard drive to the
>> camcorder with the WinDV
>> >utility (link on the Digital Camcorders > Intro page)?
>> >--
>> >PapaJohn
>> >www.papajohn.org
>
>
>.
>