I get this error message when I "repair" the connection:
"windows could not finish repairing the problem because the following
action cannot be completed: registering with dns".

How can I fix this ?

On Wed, 20 Jul 2005 09:15:37 -0400, Jan <*email_address_deleted*> wrote:

>I get this error message when I "repair" the connection:
>"windows could not finish repairing the problem because the following
>action cannot be completed: registering with dns".
>
>How can I fix this ?

Jan,

This error is typical of an LSP / Winsock problem.
<http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer-in.html>

BTW, Jan, posting your email address openly will get you more unwanted email,
than wanted email. Learn to munge your email address properly, to keep yourself
a bit safer when posting to open forums. Protect yourself and the rest of the
internet - read this article.
<http://nitecruzr.blogspot.com/2005/05/how-to-post-on-usenet-and-encourage.html#Munging>

--
Cheers,
Chuck, MS-MVP [Windows - Networking]
http://nitecruzr.blogspot.com/
Paranoia is not a problem, when it's a normal response from experience.
My email is AT DOT
actual address pchuck mvps org.

You may want to reset TCP/IP. This post may help.

registration of DNS records failed RPC server is unavailable
http://www.chicagotech.net/netforums...pic.php?t=3878

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"rangga wingit" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> how can i fix it?
> "Can't register with DNS""
>
> url:http://www.ureader.com/msg/12843000.aspx

makara chhun wrote:

> I get this error message when I "repair" the connection:
> "windows could not finish repairing the problem because the following
> action cannot be completed: registering with dns".

This means your computer can't get DNS information from whatever device is
providing DNS. In a home or small business setup, this is usually a
cable/DSL modem and/or a router. In a corporate domain, this is usually a
server.

If you have a cable/DSL modem, take out the power plug on its back and wait
30 seconds. Plug it back in and see if you have Internet access. If not,
call your Internet Service Provider.

If you have a cable/DSL modem and a router, unplug the modem and then unplug
the router. Wait 30 seconds. Plug in the cable/DSL modem and wait until all
the lights are on. Then plug in the router. See if you have Internet access.
If not, plug your computer directly into the cable/DSL modem. If you have
Internet access, your router is bad. If you don't have Internet access, call
your Internet Service Provider.

Since you forgot to tell us anything about your computer or your network
setup, that's as specific as I can get.

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ