cornedbeef007-groups wrote:
> Start | Network connections.
> Select the nic card.
> Right click, select Status, and nothing happens.
>
> The nic is working OK, I can Disable it, enable it, repair it, but I
> can't read the Status of it.
>
> I have tried uninstalling / reinstalling it in device manager.
>
> Any ideas how to fix it so I can read the status?
Shenan Stanley wrote:
> You uninstalled/installed it - but did you do so with the latest
> driver from the manufacturer of sais device?
cornedbeef007-groups wrote:
> It's an onboard nic, and it uses the driver loaded from the
> motherboard's driver cdrom.
> Should I load the motherboard's drivers again? Will it even load
> anything new with it being the same as what is already there, even
> though the existing might be corrupt?
> How can I force it to use the "new" copy of the driver?
>
> It used to work months(?) ago, but I only noticed this problem the
> other day.
> It's not a problem, other than it 'should' work, but doesn't.
1) Doesn't matter if it is an on-board NIC - it is still someone's chip and
only in a about half the cases is it actually the same as the motherboard.
Intel, Broadcom are common chipsets to be integrated into others mainboards.
What is it under the Device Manager?
2) Sometimes a patch to fix a hole in Windows/other OS can close something a
driver was taking advantage of (knowingly or unknowingly) and a new driver
might be needed - thus you should always check the manufacturer's site for
the latest driver if you start having trouble. Try the mainboard
manufacturer's web site first - follow that up by checking the chipset of
the NIC's manufacturer's web page for the model of the chipset it showed in
(1).
3) When was the last time you scanned for malware?
Reboot and logon as administrative user.
Download, install, run, update and perform a full scan with the following
(freeware version):
SuperAntiSpyware
http://www.superantispyware.com/
Reboot and logon as administrative user.
Download, install, run, update and perform a full scan with the following
(freeware version):
MalwareBytes
http://www.malwarebytes.com/
Reboot and logon as administrative user.
Download and run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx
You may find nothing, you may find only cookies, you may think it is a
waste of time - but if you do all this and report back here with what you
do/don't find as you are doing all of it - you are adding more pieces to
the puzzle and the entire picture just may become clearer and your
problem resolved.
Reboot and logon as administrative user.
Your "I have tried uninstalling / reinstalling it in device manager" without
searching for a newer version of the driver reminds me of the quote,
"Insanity is doing the same thing over and over again but expecting
different results." *grin*
One thing that could have happened - a driver update accepted from Microsoft
(who had nothing to do with the manufacture or current support of your NIC.)
Another things - things can and do go bad over time - could be that
component is doing just that. Network components can get surges just like
electrical components can. ;-)
--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html
Similar Threads
