I am using an old HP with an NetMos PCI parallel port for a print server on
my network. Plugged into the HP's one standard parallel port is a HP laser
printer. A Lexmark 3000 is plugged into the PCI card. Previously I had a
HP 895cxi plugged into the PCI card and it worked fine.

The Lexmark works fine locally but I get communication failures over the
network. Anyone suggest how I can start trouble shooting this?

Thx
Froggie

[This followup was posted to comp.periphs.printers and a copy was sent to
the cited author.]

In article <n_9xb.28001$(E-Mail Removed)>,
(E-Mail Removed) says...
> I am using an old HP with an NetMos PCI parallel port for a print server on
> my network. Plugged into the HP's one standard parallel port is a HP laser
> printer. A Lexmark 3000 is plugged into the PCI card. Previously I had a
> HP 895cxi plugged into the PCI card and it worked fine.
>
> The Lexmark works fine locally but I get communication failures over the
> network. Anyone suggest how I can start trouble shooting this?

Which Lexmark model? If it's host-based, as many low-end printers are,
it may not be network compatible.

--
If there is a no_junk in my address, please REMOVE it before replying!
All junk mail senders will be prosecuted to the fullest extent of the
law!!
http://home.att.net/~andyross