Thanks a lot for your help, Tom.
It turns out the Parallel port setting was disabled in my BIOS. I rarely go
there and had no idea where to look. I set it to Normal (standard) and when I
rebooted the system, the computer detected the new hardware and installed the
right drivers. So now I can print. I just find it weird that Windows detected
the LPT1 port and drivers as enabled and working even before the parallel
port was even enabled and set accordingly in the BIOS. Ahh... computers. I
just don't get it! ;-)
Thanks again!
Best Regards -
Ben
"Thomas Ferguson" wrote:
> The Epson Stylus 600 works fairly well with XP. It is to be connected to
> a parallel port, usually LPT1
> using an IEEE certified parallel printer cable. The computer BIOS
> setting is best set for standard parallel port, SPP, bi-directional port
> or similar. If possible, do not set it to ECP or EPP or ECP & EPP.
>
> The only native driver for the printer is on the Windows CP CD. Install
> using the Add Printer wizard.
>
> The Epson LQ-860 drivers, and a few others, can be used. Using these
> drivers, you will discover that the printer actually has some resident
> fonts (in printer ROM) that are not accessible from the Stylus 600
> driver. However, with this driver, graphics printing quality is
> compromised.
>
> Windows 9x drivers _cannot be used_.
>
> Let us know.
>
> Tom
> MSMVP
> Windows Shell/User
>
> "the_best_of_fools" <(E-Mail Removed)> wrote in
> message news:E7A27E3E-81E7-46CC-B38E-(E-Mail Removed)...
> :I have an Epson stylus color 600 I can't get to work with Windows XP.
> This
> : printer worked fine with my old Mac.
> :
> : I've tried everything I could and nothing is working. The printer is
> : connected to
> : the computer via parallel LPT1 port. I've installed the WindowsXP
> resident
> : drivers
> : for this printer model (the Epson drivers are too old and not
> verified). The
> : computer doesn't detect the new hardware with Plug and Play when
> turned ON
> : (don't know why) so I had to manually Add Hardware (Printer Port) with
> the
> : Hardware Wizard. I'm not sure how to recognize if the LPT1 port is
> active or
> : not and set up properly in the BIOS? I read something about having to
> set the
> : parallel port to ESP or ECP depending on the printer's requirement
> (which I
> : don't know) in the BIOS?
> :
> : Everytime I send a test page or print from a command prompt or WordPad
> : nothing happens for 1-2 minutes and then I get a "Printer Out of
> Paper"
> : message in the pop-up. Of course, the printer has enough paper (and I
> can
> : print a sefl-test page from the printer). I also tried with another
> parallel
> : cable and it still doesn't work. I've tried uninstalling/reinstalling
> the
> : printer's driver many time and it's still not printing.
> :
> : Any idea what I'm missing here?
> :
> : Thanks,
> : Ben
> :
>
>
>
|
Similar Threads
