Hi Chris,
Thanks for the reply and firstly let me address the item you found confusing.
"> You had WMP before-10 and you could hear bitmap sound (WAV, MP3), apart
from
> system sounds.
> You have WMP 10, and it appears to play bitmap sound, but you can't hear it."
What I didn't mention in the first part is that WMP9 was looking like it
played the MIDI files but there was no sound, and installing WMP10 it was the
same result. BMP (Wav and Mp3) play fine with no issues.
"You can play vector music (MIDI), but you can't save the GM Synth (wouldn't
that be GS Wavetable SW Synth?) used as the default."...Yes the GM Wavetable
SW Synth is the one I was referring to, it is in the pull down list for
default devices, but If I select it, it won't save it! Come back into that
window after clicking OK and it appears blank again!
The volume settings are all OK and this is clarified by the fact that it
will play the MIDI files through the DXDIAG program.
I tend to agree with you that all components are installed, and it appears
to be registry level issues....unfortunately, thats a bit of a minefield and
I wouldn't even know where to start to be honest.
The thing that really confuses me, is the fact that it is a brand new
install of XP on a new machine, I don't see how the registry could have got
messed up so quickly!
Any further suggestions on fixing this would be appreciated.
Regards,
Mark
"Chris Laarman" wrote:
> maj3091 ((E-Mail Removed)) in
> 4DB66B8F-427C-4A24-AE65-(E-Mail Removed):
>
> > Running XP Pro SP2 and can't hear MIDI files through Media Player. I
> > can't select a default Midi playback device from Sound options under
> > control panel. I can see the MS GM Synth in the list, but when I
> > select it and click Apply or OK, then open it again, it defaults to
> > blank.
> >
> > I can run DXDIAG and play direct music, using the MS GM Synth.
> >
> > I can here MP3 and WAV files through media player.
> >
> > Another small issue is, under sound options, when you select a sound
> > for an event, I can't play them back through there either?
> >
> > The default playback and record device are set to AC97.
> >
> > Any suggestions really appreciated....
> >
> > Just downloaded WMP10 and still got same problem - it appears to play
> > but no sound.
>
> You seem to contradict yourself, and that makes it harder to get the
> picture. :-)
>
> You had WMP before-10 and you could hear bitmap sound (WAV, MP3), apart from
> system sounds.
> You have WMP 10, and it appears to play bitmap sound, but you can't hear it.
>
> You can play vector music (MIDI), but you can't save the GM Synth (wouldn't
> that be GS Wavetable SW Synth?) used as the default.
>
> It seems that all components (hard- and software) are present and working,
> but that some settings (in the Registry, where else...) mix things up.
>
> Firstly, try to fix the handling of bitmap sound. Only secondly try to fix
> the vector sound, as it builds on the former.
> Be sure to have all relevant sliders in the Volume Control visible, set
> above zero and not muted. Note that the SW Synth slider is dependent on the
> Wave one.
>
> I'm sorry that I can't be more specific and helpful.
> Please post your findings if you get things fixed.
>
> --
> Chris Laarman
>
>
>
Similar Threads
