I'm using FP 2000 on a Win98SE desktop computer.

When I try to open a web page for update, I am unable to
do so and get one of 2 error messages: (1) "<webpage
name> is no longer available." or (2) "Accessing HTTP
servers requires 32-bit networking which is not installed
or may be misconfigured."

I know the page is available since I can open it on a
laptop computer which accesses the Internet through the
same router and DSL connection as this machine does.
Also, my "network properties" indicate that TCP/IP is
installed for the network adapter in the desktop.

Microsoft's Knowledge Base article 265032 blames a
similar problem (with publishing from FP 2000) on
ZoneAlarm firewall software. I had installed the free
version of ZoneAlarm prior to the onset of this FP
problem. But the problem continues even after I
uninstalled ZoneAlarm as the KB article recommended.
(Zone Labs provides only "knowledge base" type help for
the free ZA product, and I could not find any help there.)

What should I do to restore the ability to open web pages
in FP 2000.

Did you make sure that all references to Zone Alarm were removed from the
registry?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
----------------------------------------------------------------------------
-
Microsoft FrontPage:
http://www.microsoft.com/office/fron...o/default.mspx
http://msdn.microsoft.com/office/und...ing/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
"oscar" <(E-Mail Removed)> wrote in message
news:240e01c427bb$2a6a6580$(E-Mail Removed)...
> I'm using FP 2000 on a Win98SE desktop computer.
>
> When I try to open a web page for update, I am unable to
> do so and get one of 2 error messages: (1) "<webpage
> name> is no longer available." or (2) "Accessing HTTP
> servers requires 32-bit networking which is not installed
> or may be misconfigured."
>
> I know the page is available since I can open it on a
> laptop computer which accesses the Internet through the
> same router and DSL connection as this machine does.
> Also, my "network properties" indicate that TCP/IP is
> installed for the network adapter in the desktop.
>
> Microsoft's Knowledge Base article 265032 blames a
> similar problem (with publishing from FP 2000) on
> ZoneAlarm firewall software. I had installed the free
> version of ZoneAlarm prior to the onset of this FP
> problem. But the problem continues even after I
> uninstalled ZoneAlarm as the KB article recommended.
> (Zone Labs provides only "knowledge base" type help for
> the free ZA product, and I could not find any help there.)
>
> What should I do to restore the ability to open web pages
> in FP 2000.

you should just be able to go into Zone Alarm (if that's what the cause is) and Allow access to the url.- if it's disabled just change it to Allow.


"oscar" <(E-Mail Removed)> wrote in message news:240e01c427bb$2a6a6580$(E-Mail Removed)...
| I'm using FP 2000 on a Win98SE desktop computer.
|
| When I try to open a web page for update, I am unable to
| do so and get one of 2 error messages: (1) "<webpage
| name> is no longer available." or (2) "Accessing HTTP
| servers requires 32-bit networking which is not installed
| or may be misconfigured."
|
| I know the page is available since I can open it on a
| laptop computer which accesses the Internet through the
| same router and DSL connection as this machine does.
| Also, my "network properties" indicate that TCP/IP is
| installed for the network adapter in the desktop.
|
| Microsoft's Knowledge Base article 265032 blames a
| similar problem (with publishing from FP 2000) on
| ZoneAlarm firewall software. I had installed the free
| version of ZoneAlarm prior to the onset of this FP
| problem. But the problem continues even after I
| uninstalled ZoneAlarm as the KB article recommended.
| (Zone Labs provides only "knowledge base" type help for
| the free ZA product, and I could not find any help there.)
|
| What should I do to restore the ability to open web pages
| in FP 2000.

Crash: He said it's uninstalled.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
----------------------------------------------------------------------------
-
Microsoft FrontPage:
http://www.microsoft.com/office/fron...o/default.mspx
http://msdn.microsoft.com/office/und...ing/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
"Crash Gordon®" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
you should just be able to go into Zone Alarm (if that's what the cause is)
and Allow access to the url.- if it's disabled just change it to Allow.


"oscar" <(E-Mail Removed)> wrote in message
news:240e01c427bb$2a6a6580$(E-Mail Removed)...
| I'm using FP 2000 on a Win98SE desktop computer.
|
| When I try to open a web page for update, I am unable to
| do so and get one of 2 error messages: (1) "<webpage
| name> is no longer available." or (2) "Accessing HTTP
| servers requires 32-bit networking which is not installed
| or may be misconfigured."
|
| I know the page is available since I can open it on a
| laptop computer which accesses the Internet through the
| same router and DSL connection as this machine does.
| Also, my "network properties" indicate that TCP/IP is
| installed for the network adapter in the desktop.
|
| Microsoft's Knowledge Base article 265032 blames a
| similar problem (with publishing from FP 2000) on
| ZoneAlarm firewall software. I had installed the free
| version of ZoneAlarm prior to the onset of this FP
| problem. But the problem continues even after I
| uninstalled ZoneAlarm as the KB article recommended.
| (Zone Labs provides only "knowledge base" type help for
| the free ZA product, and I could not find any help there.)
|
| What should I do to restore the ability to open web pages
| in FP 2000.

oops, missed that part.


"Tom Pepper Willett" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
| Crash: He said it's uninstalled.
| --
| =====================================================
| Tom Pepper Willett [Microsoft MVP - FrontPage]
| ----------------------------------------------------------------------------
| -
| Microsoft FrontPage:
| http://www.microsoft.com/office/fron...o/default.mspx
| http://msdn.microsoft.com/office/und...ing/frontpage/
| To assist you in getting the best answers for FrontPage support see:
| http://www.net-sites.com/sitebuilder/newsgroups.asp
| =====================================================
| "Crash Gordon®" <(E-Mail Removed)> wrote in message
| news:(E-Mail Removed)...
| you should just be able to go into Zone Alarm (if that's what the cause is)
| and Allow access to the url.- if it's disabled just change it to Allow.
|
|
| "oscar" <(E-Mail Removed)> wrote in message
| news:240e01c427bb$2a6a6580$(E-Mail Removed)...
| | I'm using FP 2000 on a Win98SE desktop computer.
| |
| | When I try to open a web page for update, I am unable to
| | do so and get one of 2 error messages: (1) "<webpage
| | name> is no longer available." or (2) "Accessing HTTP
| | servers requires 32-bit networking which is not installed
| | or may be misconfigured."
| |
| | I know the page is available since I can open it on a
| | laptop computer which accesses the Internet through the
| | same router and DSL connection as this machine does.
| | Also, my "network properties" indicate that TCP/IP is
| | installed for the network adapter in the desktop.
| |
| | Microsoft's Knowledge Base article 265032 blames a
| | similar problem (with publishing from FP 2000) on
| | ZoneAlarm firewall software. I had installed the free
| | version of ZoneAlarm prior to the onset of this FP
| | problem. But the problem continues even after I
| | uninstalled ZoneAlarm as the KB article recommended.
| | (Zone Labs provides only "knowledge base" type help for
| | the free ZA product, and I could not find any help there.)
| |
| | What should I do to restore the ability to open web pages
| | in FP 2000.
|
|

Go here: http://www.hoverdesk.net/freeware.htm
Download and run RegSeeker. Click "Clean the Registry" and click ok.

It's going to find a lot and I mean a lot of junk entries, which "should" include the ZA
leftovers.
When It's done, make sure the backup box is checked, then Click "Select all" then right
click in the main panel and click "delete selected items"

Reboot the computer and try.


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
........................with a computer

"oscar" <(E-Mail Removed)> wrote in message
news:240e01c427bb$2a6a6580$(E-Mail Removed)...
> I'm using FP 2000 on a Win98SE desktop computer.
>
> When I try to open a web page for update, I am unable to
> do so and get one of 2 error messages: (1) "<webpage
> name> is no longer available." or (2) "Accessing HTTP
> servers requires 32-bit networking which is not installed
> or may be misconfigured."
>
> I know the page is available since I can open it on a
> laptop computer which accesses the Internet through the
> same router and DSL connection as this machine does.
> Also, my "network properties" indicate that TCP/IP is
> installed for the network adapter in the desktop.
>
> Microsoft's Knowledge Base article 265032 blames a
> similar problem (with publishing from FP 2000) on
> ZoneAlarm firewall software. I had installed the free
> version of ZoneAlarm prior to the onset of this FP
> problem. But the problem continues even after I
> uninstalled ZoneAlarm as the KB article recommended.
> (Zone Labs provides only "knowledge base" type help for
> the free ZA product, and I could not find any help there.)
>
> What should I do to restore the ability to open web pages
> in FP 2000.

I found 2 instances of "ZAMailSafe" and a reference
to "Zone Labs" in the registry under HKEY_CLASSES_ROOT.
They pointed to a file "..\Program Files\Zone Labs\Zone
Alarm\ZLCLIENT.EXE". But I could not find ZLCLIENT.EXE on
my drive.

However, "ZLCLIENT.LGC" does appear in
the ..\windows\applog folder, but it says it requires
ZLCLIENT.EXE to open. I looked at the .lgc file with
WordPad. It has many screens full of entries (strings of
letters and numbers), some followed by a .dll file name.
But I couldn't tell what any of these entries mean.

>-----Original Message-----
>Did you make sure that all references to Zone Alarm were
removed from the
>registry?
>--
>=====================================================
>Tom Pepper Willett [Microsoft MVP - FrontPage]
>----------------------------------------------------------
------------------
>-
>Microsoft FrontPage:
>
http://www.microsoft.com/office/fron...odinfo/default.
mspx
>
http://msdn.microsoft.com/office/und...ing/frontpage/
>To assist you in getting the best answers for FrontPage
support see:
> http://www.net-sites.com/sitebuilder/newsgroups.asp
>=====================================================
>"oscar" <(E-Mail Removed)> wrote in
message
>news:240e01c427bb$2a6a6580$(E-Mail Removed)...
>> I'm using FP 2000 on a Win98SE desktop computer.
>>
>> When I try to open a web page for update, I am unable to
>> do so and get one of 2 error messages: (1) "<webpage
>> name> is no longer available." or (2) "Accessing HTTP
>> servers requires 32-bit networking which is not
installed
>> or may be misconfigured."
>>
>> I know the page is available since I can open it on a
>> laptop computer which accesses the Internet through the
>> same router and DSL connection as this machine does.
>> Also, my "network properties" indicate that TCP/IP is
>> installed for the network adapter in the desktop.
>>
>> Microsoft's Knowledge Base article 265032 blames a
>> similar problem (with publishing from FP 2000) on
>> ZoneAlarm firewall software. I had installed the free
>> version of ZoneAlarm prior to the onset of this FP
>> problem. But the problem continues even after I
>> uninstalled ZoneAlarm as the KB article recommended.
>> (Zone Labs provides only "knowledge base" type help for
>> the free ZA product, and I could not find any help
there.)
>>
>> What should I do to restore the ability to open web
pages
>> in FP 2000.
>
>
>.
>

RegSeeker will find zillions of entries...unfortunately it doesn't explain many of them...becareful Oscar! (it usually takes an hour to run through my reg :-)


"Steve Easton" <(E-Mail Removed)> wrote in message news:O7EoCH%(E-Mail Removed)...
| Go here: http://www.hoverdesk.net/freeware.htm
| Download and run RegSeeker. Click "Clean the Registry" and click ok.
|
| It's going to find a lot and I mean a lot of junk entries, which "should" include the ZA
| leftovers.
| When It's done, make sure the backup box is checked, then Click "Select all" then right
| click in the main panel and click "delete selected items"
|
| Reboot the computer and try.
|
|
| --
| Steve Easton
| Microsoft MVP FrontPage
| 95isalive
| This site is best viewed............
| .......................with a computer
|
| "oscar" <(E-Mail Removed)> wrote in message
| news:240e01c427bb$2a6a6580$(E-Mail Removed)...
| > I'm using FP 2000 on a Win98SE desktop computer.
| >
| > When I try to open a web page for update, I am unable to
| > do so and get one of 2 error messages: (1) "<webpage
| > name> is no longer available." or (2) "Accessing HTTP
| > servers requires 32-bit networking which is not installed
| > or may be misconfigured."
| >
| > I know the page is available since I can open it on a
| > laptop computer which accesses the Internet through the
| > same router and DSL connection as this machine does.
| > Also, my "network properties" indicate that TCP/IP is
| > installed for the network adapter in the desktop.
| >
| > Microsoft's Knowledge Base article 265032 blames a
| > similar problem (with publishing from FP 2000) on
| > ZoneAlarm firewall software. I had installed the free
| > version of ZoneAlarm prior to the onset of this FP
| > problem. But the problem continues even after I
| > uninstalled ZoneAlarm as the KB article recommended.
| > (Zone Labs provides only "knowledge base" type help for
| > the free ZA product, and I could not find any help there.)
| >
| > What should I do to restore the ability to open web pages
| > in FP 2000.
|
|