Don't know how or when but I can not get my display to open under properties
or under control panel.
Any one know how I can get it to open.

Ziggy

ziigy wrote:
> Don't know how or when but I can not get my display to open under properties
> or under control panel.
> Any one know how I can get it to open?
>
> Ziggy

Click Start, Run and type CMD in the run box, press Enter key. Type:

regsrv32 themeui (and press Enter key)

Then type:

regsrv32 /i shell32″ (and press Enter key)

You might have to restart the computer before this will help.

--
Joe =o)

Elmo wrote:
> ziigy wrote:
>> Don't know how or when but I can not get my display to open under properties
>> or under control panel.
>> Any one know how I can get it to open?
>>
>> Ziggy
>
> Click Start, Run and type CMD in the run box, press Enter key. Type:
>
> regsrv32 themeui (and press Enter key)
>
> Then type:
>
> regsrv32 /i shell32″ (and press Enter key)
>
> You might have to restart the computer before this will help.

Whoops! No quotes at the end of the second command.. it should read:

regsrv32 /i shell32 (and press Enter key)

--
Joe =o)

Thanks but it did not work. Tried it twice. Would not rcognize the commands
entered.
Anyone have any other ideas?

"Elmo" wrote:

> Elmo wrote:
> > ziigy wrote:
> >> Don't know how or when but I can not get my display to open under properties
> >> or under control panel.
> >> Any one know how I can get it to open?
> >>
> >> Ziggy
> >
> > Click Start, Run and type CMD in the run box, press Enter key. Type:
> >
> > regsrv32 themeui (and press Enter key)
> >
> > Then type:
> >
> > regsrv32 /i shell32″ (and press Enter key)
> >
> > You might have to restart the computer before this will help.
>
> Whoops! No quotes at the end of the second command.. it should read:
>
> regsrv32 /i shell32 (and press Enter key)
>
> --
> Joe =o)
> .
>

Fixed

"ziigy" wrote:

> Don't know how or when but I can not get my display to open under properties
> or under control panel.
> Any one know how I can get it to open.
>
> Ziggy