Just uninstalled the software and every USB device entry
in Device Manager. WinXP picked them all up on restart.
Re-installed the software. Same problem...when I attach
my camera, I get the same error message I describe below.
I upgraded the Version 1.2 software to Version 2.0, which
had some bugs that rendered certain functions unusable.
Uninstalled V2, reinstalled V1.2, and this problem
started. What's wierd is that I went through this same
software upgrade, uninstall, reinstall cycle just recently
with no adverse affect.
I'm getting nervous now. I'm open for any suggestions.
Thanks for the help.
>-----Original Message-----
> Why did you have to reinstall the HP Software? I
would remove everything
>connected with the Camera and start over.
> Remove the Software from Add/Remove Programs in
Control Panel and remove
>the USB device entries in Device Manager. Just rt click
on them and choose
>uninstall. Restart and let WinXP reinstall them.
>"rhconley" <(E-Mail Removed)> wrote in
message
>news:075501c3bb5b$e5a7bfe0$(E-Mail Removed)...
>> Until today, when I placed my digital camera into it's
>> dock connected to my WinXP Home machine, it would be
>> detected and picture download would start automatically.
>> However, I had to re-install the Hewlett-Packard photo
>> software package and now when I place my camera in the
>> dock, I'm presented with an error message that
>> reads "Cannot install this hardware. An error occurred
>> during installation of the device. The required section
>> was not found in the INF." This is very disturbing
>> because the camera was working normally 2 hours ago. I
>> checked the HP web site for guidance...nothing. I made
no
>> changes to my computer or the camera...just re-installed
>> the HP photo software package. Can anyone provide
>> guidance? I have no problem modifying files or the
>> registry. Any help would be appreciated. Thank you.
>
>
>.
>
|
Similar Threads
