Just done a clean xp installation of xp and try to install the on-board
graphic driver from the msi website. It says it cannot find the device which
I do not understand as its on board. In my DM - under other devices listing
(video controller (vga compatible))

The manufacturer has ask me to reinstall the xp which I think its a bit
strange as the drivers are the first thing I install after xp.

Properties>setting and there 'Display (default monitor on (bkank)) which I
dont understand why it does not show the name of my monitor which is dell.

Some times when I shut down I get this message that PCARam Dr did not
initialise)
At Setting>Advance>adapter>properties?resources-VgaSave and it shows red
cross stating conflicting devices and all used by SIS Accelerator graphic
port. So how do I go about sort this conflict of resources? Thank you for
your help.
As it stand the display is ok and I can change the resolution from 800x to
1024x

--
KWANPLWL
--
kwanplwl

Is the MB intel based or amd,if intel,im surprised at thier suggestion of
reinstalling
xp.For intel the 1st install after xp would be the chipset installation
utility,then the
drivers/software for the video controller.Plus,you should always get the
downloads
from intel,not msi....

"kwanplwl" wrote:

> Just done a clean xp installation of xp and try to install the on-board
> graphic driver from the msi website. It says it cannot find the device which
> I do not understand as its on board. In my DM - under other devices listing
> (video controller (vga compatible))
>
> The manufacturer has ask me to reinstall the xp which I think its a bit
> strange as the drivers are the first thing I install after xp.
>
> Properties>setting and there 'Display (default monitor on (bkank)) which I
> dont understand why it does not show the name of my monitor which is dell.
>
> Some times when I shut down I get this message that PCARam Dr did not
> initialise)
> At Setting>Advance>adapter>properties?resources-VgaSave and it shows red
> cross stating conflicting devices and all used by SIS Accelerator graphic
> port. So how do I go about sort this conflict of resources? Thank you for
> your help.
> As it stand the display is ok and I can change the resolution from 800x to
> 1024x
>
> --
> KWANPLWL
> --
> kwanplwl

Intel cpu and the mobo only hv this ms 6524 marking and there is a chip with
sis 961 marking. I was told that sis961 is included in the sis650 series.
When you say download from Intel, can you please hep to pin down the exact
loaction for the driver, thanks
--
kwanplwl


"Andrew E." wrote:

> Is the MB intel based or amd,if intel,im surprised at thier suggestion of
> reinstalling
> xp.For intel the 1st install after xp would be the chipset installation
> utility,then the
> drivers/software for the video controller.Plus,you should always get the
> downloads
> from intel,not msi....
>
> "kwanplwl" wrote:
>
> > Just done a clean xp installation of xp and try to install the on-board
> > graphic driver from the msi website. It says it cannot find the device which
> > I do not understand as its on board. In my DM - under other devices listing
> > (video controller (vga compatible))
> >
> > The manufacturer has ask me to reinstall the xp which I think its a bit
> > strange as the drivers are the first thing I install after xp.
> >
> > Properties>setting and there 'Display (default monitor on (bkank)) which I
> > dont understand why it does not show the name of my monitor which is dell.
> >
> > Some times when I shut down I get this message that PCARam Dr did not
> > initialise)
> > At Setting>Advance>adapter>properties?resources-VgaSave and it shows red
> > cross stating conflicting devices and all used by SIS Accelerator graphic
> > port. So how do I go about sort this conflict of resources? Thank you for
> > your help.
> > As it stand the display is ok and I can change the resolution from 800x to
> > 1024x
> >
> > --
> > KWANPLWL
> > --
> > kwanplwl