I have a SIIG AP-40SCSI Pro scsi card which is installed and working
perfectly. I attached my canoscan, set the termination and scsi id,
turned the scanner on and then turned my machine on. The computer now
hangs and the only way I can get it to boot is by switching off the
scanner.

Has anyone got any ideas?

Dell Precision 340
Win XP Pro

Thanks

Dodger

(E-Mail Removed) (dodger) wrote in message news:<(E-Mail Removed)>...
> I have a SIIG AP-40SCSI Pro scsi card which is installed and working
> perfectly. I attached my canoscan, set the termination and scsi id,
> turned the scanner on and then turned my machine on. The computer now
> hangs and the only way I can get it to boot is by switching off the
> scanner.
>
> Has anyone got any ideas?
>
> Dell Precision 340
> Win XP Pro
>
> Thanks
>
> Dodger
I don't know your scsi card. But I had a similar problem with mine. In
the bios of the scsi card I reduced the speed for the scanner id
(2MByte is ok).
You can try to switch on the scanner after your system has booted.
O.K. scsi is not plug-and pray, but as an administrator you can
enforce a new hardware scan.

Winfried