PC Review


Reply
Thread Tools Rate Thread

Canon S630 Printing Problem with WinXP

 
 
~*~ Zinderellie ~*~
Guest
Posts: n/a
 
      6th Dec 2004
I have a Canon S630 printer, which functioned and printed without error in
Win ME. I have installed the latest Canon driver for WinXP, but have a
constant print problem.

I have an HP Media Center PC m1170n that came with WinXP & SP2 preinstalled.
I am also using a parallel printer cable instead of a USB cable. I have
searched and read a few posts that state their Canon S630 prints fine in
WinXP, so I really don't know what is wrong with my set up.

A page only prints halfway through on the first pass, then prompts for
another sheet of paper and only prints 1 or 2 more lines. It then flashes
the green light only and hangs up. I have to then go into the Printer
Status window and cancel the print job manually.

Does anyone know what the problem might be?

I look forward to any help and suggestions.

Thanks,
Tanya =)
************************************
To reply remove ".nospam" from email address
************************************


 
Reply With Quote
 
 
 
 
Dan G
Guest
Posts: n/a
 
      6th Dec 2004
Did you by any chance do an "Upgrade Install" of Win XP over ME?



"~*~ Zinderellie ~*~" <(E-Mail Removed)> wrote in message
news:gLOsd.42$N%6.21@trnddc05...
> I have a Canon S630 printer, which functioned and printed without error in
> Win ME. I have installed the latest Canon driver for WinXP, but have a
> constant print problem.
>
> I have an HP Media Center PC m1170n that came with WinXP & SP2

preinstalled.
> I am also using a parallel printer cable instead of a USB cable. I have
> searched and read a few posts that state their Canon S630 prints fine in
> WinXP, so I really don't know what is wrong with my set up.
>
> A page only prints halfway through on the first pass, then prompts for
> another sheet of paper and only prints 1 or 2 more lines. It then flashes
> the green light only and hangs up. I have to then go into the Printer
> Status window and cancel the print job manually.
>
> Does anyone know what the problem might be?
>
> I look forward to any help and suggestions.
>
> Thanks,
> Tanya =)
> ************************************
> To reply remove ".nospam" from email address
> ************************************
>
>



 
Reply With Quote
 
Cari \(MS-MVP\)
Guest
Posts: n/a
 
      6th Dec 2004
http://www.coribright.com/windows/Article%20One.htm
--
Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
www.coribright.com

"~*~ Zinderellie ~*~" <(E-Mail Removed)> wrote in message
news:gLOsd.42$N%6.21@trnddc05...
>I have a Canon S630 printer, which functioned and printed without error in
>Win ME. I have installed the latest Canon driver for WinXP, but have a
>constant print problem.
>
> I have an HP Media Center PC m1170n that came with WinXP & SP2
> preinstalled. I am also using a parallel printer cable instead of a USB
> cable. I have searched and read a few posts that state their Canon S630
> prints fine in WinXP, so I really don't know what is wrong with my set up.
>
> A page only prints halfway through on the first pass, then prompts for
> another sheet of paper and only prints 1 or 2 more lines. It then flashes
> the green light only and hangs up. I have to then go into the Printer
> Status window and cancel the print job manually.
>
> Does anyone know what the problem might be?
>
> I look forward to any help and suggestions.
>
> Thanks,
> Tanya =)
> ************************************
> To reply remove ".nospam" from email address
> ************************************
>
>




 
Reply With Quote
 
~*~ Zinderellie ~*~
Guest
Posts: n/a
 
      7th Dec 2004
I followed your step by step instructions. When I was doing the Add/Remove
Programs, I noticed 2 Canon S630 items. I successfully removed one, but the
other said it couldn't locate the uninstall, and it has left this item
hanging in the list. Is there an easy way to get rid of the dangling item?
After reinstalling the new driver, I was only able to print 1 page correctly
and completely. Then it went back to printing half page, and then more when
it prompted for another page.

Some additional details... I have the parallel cable attached to my Zip
drive, and the Zip drive to the computer. I have noticed that it takes a
long time for the print job to get to the printer, and most times the
printer status box comes up and says "Printer not responding" before it
begins to print.

Again, I look forward to all possible help.

Thanks,
Tanya




"Cari (MS-MVP)" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> http://www.coribright.com/windows/Article%20One.htm
> --
> Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
> www.coribright.com
>
> "~*~ Zinderellie ~*~" <(E-Mail Removed)> wrote in message
> news:gLOsd.42$N%6.21@trnddc05...
>>I have a Canon S630 printer, which functioned and printed without error in
>>Win ME. I have installed the latest Canon driver for WinXP, but have a
>>constant print problem.
>>
>> I have an HP Media Center PC m1170n that came with WinXP & SP2
>> preinstalled. I am also using a parallel printer cable instead of a USB
>> cable. I have searched and read a few posts that state their Canon S630
>> prints fine in WinXP, so I really don't know what is wrong with my set
>> up.
>>
>> A page only prints halfway through on the first pass, then prompts for
>> another sheet of paper and only prints 1 or 2 more lines. It then
>> flashes the green light only and hangs up. I have to then go into the
>> Printer Status window and cancel the print job manually.
>>
>> Does anyone know what the problem might be?
>>
>> I look forward to any help and suggestions.
>>
>> Thanks,
>> Tanya =)
>> ************************************
>> To reply remove ".nospam" from email address
>> ************************************
>>
>>

>
>
>



 
Reply With Quote
 
Cari \(MS-MVP\)
Guest
Posts: n/a
 
      7th Dec 2004
Bruce Sanderson has an excellent article on how to blitz!
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Another problem you have is the piggy-back issue. XP does not support
connecting parallel devices in this way. Can you use a USB port for the
printer instead?
--
Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
www.coribright.com

"~*~ Zinderellie ~*~" <(E-Mail Removed)> wrote in message
news:uMatd.795$wb7.230@trnddc03...
>I followed your step by step instructions. When I was doing the Add/Remove
>Programs, I noticed 2 Canon S630 items. I successfully removed one, but the
>other said it couldn't locate the uninstall, and it has left this item
>hanging in the list. Is there an easy way to get rid of the dangling item?
>After reinstalling the new driver, I was only able to print 1 page
>correctly and completely. Then it went back to printing half page, and
>then more when it prompted for another page.
>
> Some additional details... I have the parallel cable attached to my Zip
> drive, and the Zip drive to the computer. I have noticed that it takes a
> long time for the print job to get to the printer, and most times the
> printer status box comes up and says "Printer not responding" before it
> begins to print.
>
> Again, I look forward to all possible help.
>
> Thanks,
> Tanya
>
>
>
>
> "Cari (MS-MVP)" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> http://www.coribright.com/windows/Article%20One.htm
>> --
>> Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
>> www.coribright.com
>>
>> "~*~ Zinderellie ~*~" <(E-Mail Removed)> wrote in message
>> news:gLOsd.42$N%6.21@trnddc05...
>>>I have a Canon S630 printer, which functioned and printed without error
>>>in Win ME. I have installed the latest Canon driver for WinXP, but have
>>>a constant print problem.
>>>
>>> I have an HP Media Center PC m1170n that came with WinXP & SP2
>>> preinstalled. I am also using a parallel printer cable instead of a USB
>>> cable. I have searched and read a few posts that state their Canon S630
>>> prints fine in WinXP, so I really don't know what is wrong with my set
>>> up.
>>>
>>> A page only prints halfway through on the first pass, then prompts for
>>> another sheet of paper and only prints 1 or 2 more lines. It then
>>> flashes the green light only and hangs up. I have to then go into the
>>> Printer Status window and cancel the print job manually.
>>>
>>> Does anyone know what the problem might be?
>>>
>>> I look forward to any help and suggestions.
>>>
>>> Thanks,
>>> Tanya =)
>>> ************************************
>>> To reply remove ".nospam" from email address
>>> ************************************
>>>
>>>

>>
>>
>>

>
>
>




 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
I need to replace my Canon S630, but with what? Melissa Printers 3 14th Aug 2006 01:58 PM
bad colors by Canon S630 Arnold Jansen Printers 1 19th Mar 2005 08:15 AM
Canon S630: Colors mixed incorrectly when printing. Help! Hellenason7 Printers 4 28th Sep 2004 11:51 PM
Problem with Canon s630 Martin Printers 0 19th Jun 2004 06:07 PM
Canon Printer S630 George Kammerer Windows XP Print / Fax 1 31st May 2004 06:39 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 04:00 AM.