For everyone interesting in printing to CDR with Canon's ip4000 and
Surething CD labeler, i created a template and put it on following link:

http://www.angelfire.com/ex/protonce...nPIXMA4000.zip

I hope that link works, otherwise reply here and we'll sort thing out.

I also hope it works OK. In any case, maybe you should make a test print
before you actually print on new CD
for this purpose download this design:

http://www.angelfire.com/ex/protonce...est_design.zip

open it and print it to coaster - you can use normal one (no need for
printable), as it's only a black circle and it will show on normal CDR, too,
so you'll see if it's centered. If not, open page setup and correct start
positions.

have fun!

Absolutely bloody brilliant!! Worked first time. Thanks a million
sleeperman!

Caitlin wrote:
> Absolutely bloody brilliant!! Worked first time. Thanks a million
> sleeperman!

i'm glad it works...

For some reason I can't download from your site sleeperman

Any chance you could e-mail it to me please?

Thanks a bunch!

Pete

PS please remove spamtrap from address when replying.



In article <zLtAd.7528$(E-Mail Removed)>, SleeperMan
<(E-Mail Removed)> writes
>Caitlin wrote:
>> Absolutely bloody brilliant!! Worked first time. Thanks a million
>> sleeperman!
>
>i'm glad it works...
>
>

--
Peter J. Richardson

Peter J. Richardson wrote:
> For some reason I can't download from your site sleeperman
>
> Any chance you could e-mail it to me please?
>
> Thanks a bunch!
>
> Pete
>
first of all, this server may not allow download managers to access files!
Second, i uploaded two files to a second server:

http://sleeperman/topcities.com/file...nPIXMA4000.zip

and template at

http://sleeperman/topcities.com/file...est_design.zip

these two files definitely doesn't allow GetRight manager...also note that
there are NO spaces in the name, but underscore ( _ ) !

I hope at least any of those two links will work...it's hard to find freeweb
hosting that allows zip and exe files uploaded...

How good are you

Thanks very much

I Hope surething are reading and its about time they did new templates every
so often
"SleeperMan" <(E-Mail Removed)> wrote in message
news:fLcAd.7473$(E-Mail Removed)...
> For everyone interesting in printing to CDR with Canon's ip4000 and
> Surething CD labeler, i created a template and put it on following link:
>
> http://www.angelfire.com/ex/protonce...nPIXMA4000.zip
>
> I hope that link works, otherwise reply here and we'll sort thing out.
>
> I also hope it works OK. In any case, maybe you should make a test print
> before you actually print on new CD
> for this purpose download this design:
>
> http://www.angelfire.com/ex/protonce...est_design.zip
>
> open it and print it to coaster - you can use normal one (no need for
> printable), as it's only a black circle and it will show on normal CDR,
> too, so you'll see if it's centered. If not, open page setup and correct
> start positions.
>
> have fun!
>
>

Guy Hollins wrote:
> How good are you
>
> Thanks very much
>
> I Hope surething are reading and its about time they did new
> templates every so often

True...i managed to find some templates at http://pete.mvd2.com/ , but
these templates are OOOOOLD...i think from year 2002...
and they doesn't contain any recent printers...from canon only i865 and
i9950, both not full face.


> "SleeperMan" <(E-Mail Removed)> wrote in message
> news:fLcAd.7473$(E-Mail Removed)...
>> For everyone interesting in printing to CDR with Canon's ip4000 and
>> Surething CD labeler, i created a template and put it on following
>> link: http://www.angelfire.com/ex/protonce...nPIXMA4000.zip
>>
>> I hope that link works, otherwise reply here and we'll sort thing
>> out. I also hope it works OK. In any case, maybe you should make a test
>> print before you actually print on new CD
>> for this purpose download this design:
>>
>> http://www.angelfire.com/ex/protonce...est_design.zip
>>
>> open it and print it to coaster - you can use normal one (no need for
>> printable), as it's only a black circle and it will show on normal
>> CDR, too, so you'll see if it's centered. If not, open page setup
>> and correct start positions.
>>
>> have fun!

I have tried to adapt yours to provide normal not full face but not quite
right yet I am having to use a Epson template and all I can adjust is the
page set up. My last attempt is just printing over the cd edges by a 1mm.
not bad for me.

How did you get to show the Cannon PIXMA name in the bottom right of the
surething design screen. Mine on the above shows the Epson etc even thought
I have saved it as Cannon xxx.

Regards
"SleeperMan" <(E-Mail Removed)> wrote in message
news:snxAd.7537$(E-Mail Removed)...
> Guy Hollins wrote:
>> How good are you
>>
>> Thanks very much
>>
>> I Hope surething are reading and its about time they did new
>> templates every so often
>
> True...i managed to find some templates at http://pete.mvd2.com/ , but
> these templates are OOOOOLD...i think from year 2002...
> and they doesn't contain any recent printers...from canon only i865 and
> i9950, both not full face.
>
>
>> "SleeperMan" <(E-Mail Removed)> wrote in message
>> news:fLcAd.7473$(E-Mail Removed)...
>>> For everyone interesting in printing to CDR with Canon's ip4000 and
>>> Surething CD labeler, i created a template and put it on following
>>> link: http://www.angelfire.com/ex/protonce...nPIXMA4000.zip
>>>
>>> I hope that link works, otherwise reply here and we'll sort thing
>>> out. I also hope it works OK. In any case, maybe you should make a test
>>> print before you actually print on new CD
>>> for this purpose download this design:
>>>
>>> http://www.angelfire.com/ex/protonce...est_design.zip
>>>
>>> open it and print it to coaster - you can use normal one (no need for
>>> printable), as it's only a black circle and it will show on normal
>>> CDR, too, so you'll see if it's centered. If not, open page setup
>>> and correct start positions.
>>>
>>> have fun!
>
>
>

Guy Hollins wrote:
> I have tried to adapt yours to provide normal not full face but not
> quite right yet I am having to use a Epson template and all I can
> adjust is the page set up. My last attempt is just printing over the
> cd edges by a 1mm. not bad for me.

Yep, surethign doesn't allow inner hole to be altered at all, and as i could
find out, it doesn't allow to create one, too. So, you must open existing
template and adopt it.

>
> How did you get to show the Cannon PIXMA name in the bottom right of
> the surething design screen...

ha...MAGIC!
You wouldn't believe what simple hex editor can do...


>
> Regards
> "SleeperMan" <(E-Mail Removed)> wrote in message
> news:snxAd.7537$(E-Mail Removed)...
>> Guy Hollins wrote:
>>> How good are you
>>>
>>> Thanks very much
>>>
>>> I Hope surething are reading and its about time they did new
>>> templates every so often
>>
>> True...i managed to find some templates at http://pete.mvd2.com/ ,
>> but these templates are OOOOOLD...i think from year 2002...
>> and they doesn't contain any recent printers...from canon only i865
>> and i9950, both not full face.
>>
>>
>>> "SleeperMan" <(E-Mail Removed)> wrote in message
>>> news:fLcAd.7473$(E-Mail Removed)...
>>>> For everyone interesting in printing to CDR with Canon's ip4000 and
>>>> Surething CD labeler, i created a template and put it on following
>>>> link: http://www.angelfire.com/ex/protonce...nPIXMA4000.zip
>>>>
>>>> I hope that link works, otherwise reply here and we'll sort thing
>>>> out. I also hope it works OK. In any case, maybe you should make a
>>>> test print before you actually print on new CD
>>>> for this purpose download this design:
>>>>
>>>> http://www.angelfire.com/ex/protonce...est_design.zip
>>>>
>>>> open it and print it to coaster - you can use normal one (no need
>>>> for printable), as it's only a black circle and it will show on
>>>> normal CDR, too, so you'll see if it's centered. If not, open page
>>>> setup and correct start positions.
>>>>
>>>> have fun!

Bloddy web sites...
it seems that this new site doesn't' allow long names...
so, here's third link

template:
http://sleeperman.topcities.com/files/c4k.zip

test design:
http://sleeperman.topcities.com/files/c4ktest.zip

damn...