"Brigitte" <(E-Mail Removed)> wrote in message
news:4aVUc.49380$(E-Mail Removed)...
>
> "Ron" <(E-Mail Removed)> wrote in message
> news:41241070$0$21750$(E-Mail Removed)...
> >
> > "Brigitte" <(E-Mail Removed)> wrote in message
> > news:NOMUc.47703$(E-Mail Removed)...
> > >
> > > "Ron" <(E-Mail Removed)> wrote in message
> > > news:41223555$0$5917$(E-Mail Removed)...
> > > >
> > > > "Brigitte" <(E-Mail Removed)> wrote in message
> > > > news:Z8LSc.67718$(E-Mail Removed)...
> > > > > Hi group,
> > > > > I hope someone here can answer a quick question for me. And if
this
> > is
> > > > the
> > > > > wrong group, I apologize and ask that you point me in the right
> > > direction.
> > > > >
> > > > > I have the above-mentioned printer/scanner/copier/fax machine. I
> > > > purchased
> > > > > it used on ebay. It came without the manual, but I've been able
to
> > > > > successfully figure out how the thing works, except for one little
> > > thing.
> > > > I
> > > > > can't figure out how to manually accept incoming faxes. I don't
> have
> > > the
> > > > > unit plugged into my computer, because I use it mainly for copying
> and
> > > > > faxing and I don't need it hooked up to the printer to perform
these
> > > > > functions.
> > > > >
> > > > > If anyone has this machine and knows how to receive incoming
faxes,
> > > either
> > > > > automatically or manually, I would be extremely grateful.
> > > > >
> > > > > Thank you in advance.
> > > > >
> > > > > Brigitte J.
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > > Btw, you're WELCOME!!
> > >
> > > Ummm...ok, but for what?
> > >
> > >
> >
> > Why, for the answer to your question. But maybe you didn't want any
help.
>
> If you offered anything other than a sarcastic "you're welcome", I didn't
> see it.
>
> But thanks anyway...
>
> Brigitte
>
>
Yeah, here it is dated five days ago. Don't know why you didn't see it.
"Brigitte" <(E-Mail Removed)> wrote in message
news:Z8LSc.67718$(E-Mail Removed)...
> Hi group,
> I hope someone here can answer a quick question for me. And if this is
the
> wrong group, I apologize and ask that you point me in the right direction.
>
> I have the above-mentioned printer/scanner/copier/fax machine. I
purchased
> it used on ebay. It came without the manual, but I've been able to
> successfully figure out how the thing works, except for one little thing.
I
> can't figure out how to manually accept incoming faxes. I don't have the
> unit plugged into my computer, because I use it mainly for copying and
> faxing and I don't need it hooked up to the printer to perform these
> functions.
>
> If anyone has this machine and knows how to receive incoming faxes, either
> automatically or manually, I would be extremely grateful.
>
> Thank you in advance.
>
> Brigitte J.
Direct from manual:
Receiving Documents Manually-Manual Mode (section 5-3)
You will want to set your MultiPass C5000 to receive documents manually
when you want to personally check each incoming call to see if it is from a
fax or from a person. You must have a telephone attached to the C5000.
When MP C5000 rings, pick up the phone.
1) If you hear a person's voice, start your conversation. If the caller
wants to send you a document after talking to you, wait on the line until
you hear a slow beep or silence(depending on the sending fax unit), then
press START/COPY to receive the document.
2) If you hear a slow beep or silence, another fax is trying to send you a
document. Press START/COPY.
3) Hang up the telephone after MP C5000 displays RECEIVE. If you don't hang
up, the C5000 beeps intermittently for a few seconds after you receive the
document. To disable the beeping, turn off the Off Hook Alarm option in the
Advanced: Send Fax dialog box.
All of the above assumes that you have set the C5000 for Fax/Tel mode(where
the phone line is used for both voice and fax messages, rather than the Fax
Only mode(where the phone line is dedicated for fax only).
HTH,
Ron
|
Similar Threads
