PC Review


Reply
Thread Tools Rating: Thread Rating: 3 votes, 5.00 average.

Canon LBP-465 not supported - help!

 
 
tiger
Guest
Posts: n/a
 
      30th Jun 2003
My husband & I just upgraded to XP yesterday and
discovered that there are no drivers for our printer. We
normally would have checked this out before upgrade, but
we just had a baby and wanted to upgrade our computer for
our new digital camera. Is there anyone who can help us
with this problem? I know that this printer is dated, but
it is the best printer we have ever purchased (still
looks brand new)and we use it exclusively for our
documents. Any help would be greatly appreciated.
Thanks, tiger
 
Reply With Quote
 
 
 
 
Amethyst
Guest
Posts: n/a
 
      1st Jul 2003
tiger wrote:
> My husband & I just upgraded to XP yesterday and
> discovered that there are no drivers for our printer. We
> normally would have checked this out before upgrade, but
> we just had a baby and wanted to upgrade our computer for
> our new digital camera. Is there anyone who can help us
> with this problem? I know that this printer is dated, but
> it is the best printer we have ever purchased (still
> looks brand new)and we use it exclusively for our
> documents. Any help would be greatly appreciated.
> Thanks, tiger


I'm sorry, but you're out of luck. This printer is ancient - so ancient in
fact, that there isn't even a native XP driver for it. You have no choice
but to either a) buy a new printer or b) go back to your previous OS.

--
Cassandra
Card carrying member of the Fresh Start Club 'The Undead Are People Too!'

Reply address is fake. Please send all praise, abuse, insults, bequests
of £1million to cassandra (at) craigy34 (dot) freeserve (dot) co (dot)
uk. Change the obvious to the obvious.
Private requests for assistance will not be acknowledged. Please post all
correspondence to the group so that all may benefit. Thank you.


 
Reply With Quote
 
Donald Link
Guest
Posts: n/a
 
      1st Jul 2003
If there is not xp drivers then the only way you might get lucky is install
win2000 drivers. May work, May work partially or not at all. Best to look
for a replacement.




"tiger" <(E-Mail Removed)> wrote in message
news:011901c33f38$640d5660$(E-Mail Removed)...
> My husband & I just upgraded to XP yesterday and
> discovered that there are no drivers for our printer. We
> normally would have checked this out before upgrade, but
> we just had a baby and wanted to upgrade our computer for
> our new digital camera. Is there anyone who can help us
> with this problem? I know that this printer is dated, but
> it is the best printer we have ever purchased (still
> looks brand new)and we use it exclusively for our
> documents. Any help would be greatly appreciated.
> Thanks, tiger



 
Reply With Quote
 
Amethyst
Guest
Posts: n/a
 
      1st Jul 2003
Donald Link wrote:
> If there is not xp drivers then the only way you might get lucky is

install
> win2000 drivers. May work, May work partially or not at all. Best to

look
> for a replacement.


Don

There aren't any. That printer's so old that the only drivers listed on
Canon's site are for 3.x or 95!



--
Cassandra
Card carrying member of the Fresh Start Club 'The Undead Are People Too!'

Reply address is fake. Please send all praise, abuse, insults, bequests
of £1million to cassandra (at) craigy34 (dot) freeserve (dot) co (dot)
uk. Change the obvious to the obvious.
Private requests for assistance will not be acknowledged. Please post all
correspondence to the group so that all may benefit. Thank you.


 
Reply With Quote
 
Amethyst
Guest
Posts: n/a
 
      2nd Jul 2003
tiger wrote:
> Thanks for your assistance. I guess age is a relative
> term because our printer is only 6 years old - I know
> that in the computer world that is ancient, but as I
> said, it's the best printer we've ever had and even looks
> like we just took it out of the box. It worked fine with
> Windows 98 and it works better than half of the new
> printers out there - we've already purchased 2 other
> inkjet printers in the time that we've had our laser
> printer!


Not really Six years, in computing terms, is ancient. In 1997 there were
only 2 versions of Windows in common usage, 3.x and 95. 98 had only just
been released. Just because "it worked fine with 98" doesn't mean it will
work under XP. There are only two driver versions that will work under XP -
2000 and XP (whether MS or manufacturer supplied). As that printer is /far/
too old to have either, you either go back to 98 or you purchase a new
laser.

I have an Epson Stylus Colour 900 that's given me five years of faithful
service, and it runs under XP using the 2000 driver. It is the best printer
I've ever owned, churning out crisp text and vivid graphics, even after all
these years. The cartridges are huge and it doesn't baulk at a 200-copy
newsletter run (with compatible cartridges it works out cheaper than
photocopying at the corner shop); but, sadly, there's going to come a time
when it's no longer compatible (when that'll be I don't know, as I don't
know the ERD for the next Windows release, it could be good for another
couple of years). Yes, when that time comes, I'll be sorry to see it go, but
I'll have to accept that, if I want to have the latest Windows, then I'll
have to sacrifice some of my hardware to the Windows god.



--
Cassandra
Card carrying member of the Fresh Start Club 'The Undead Are People Too!'

Reply address is fake. Please send all praise, abuse, insults, bequests
of £1million to cassandra (at) craigy34 (dot) freeserve (dot) co (dot)
uk. Change the obvious to the obvious.
Private requests for assistance will not be acknowledged. Please post all
correspondence to the group so that all may benefit. Thank you.


 
Reply With Quote
 
Amethyst
Guest
Posts: n/a
 
      2nd Jul 2003
Donald Link wrote:
> Then his solution is to go back to Windows 3.1 or Windows 95 or just drop

it
> off some cliff.
>
>
>
>
> "Amethyst" <(E-Mail Removed)> wrote in message
> news:bdrrj1$k5t$(E-Mail Removed)...
>> Donald Link wrote:
>>> If there is not xp drivers then the only way you might get lucky is

install
>>> win2000 drivers. May work, May work partially or not at all. Best to

look
>>> for a replacement.

>>
>> Don
>>
>> There aren't any. That printer's so old that the only drivers listed on
>> Canon's site are for 3.x or 95!
>>
>>
>>
>> --
>> Cassandra
>> Card carrying member of the Fresh Start Club 'The Undead Are People Too!'
>>
>> Reply address is fake. Please send all praise, abuse, insults, bequests
>> of £1million to cassandra (at) craigy34 (dot) freeserve (dot) co (dot)
>> uk. Change the obvious to the obvious.
>> Private requests for assistance will not be acknowledged. Please post all
>> correspondence to the group so that all may benefit. Thank you.


LOL!! Exactly!

--
Cassandra
Card carrying member of the Fresh Start Club 'The Undead Are People Too!'

Reply address is fake. Please send all praise, abuse, insults, bequests
of £1million to cassandra (at) craigy34 (dot) freeserve (dot) co (dot)
uk. Change the obvious to the obvious.
Private requests for assistance will not be acknowledged. Please post all
correspondence to the group so that all may benefit. Thank you.


 
Reply With Quote
 
New Member
Join Date: May 2007
Posts: 1
 
      24th May 2007
me podrian desir donde consigo el driver de la lbp 465 para windows xp o 2ooo porfavor me despido.....




Quote:
Originally Posted by tiger
My husband & I just upgraded to XP yesterday and
discovered that there are no drivers for our printer. We
normally would have checked this out before upgrade, but
we just had a baby and wanted to upgrade our computer for
our new digital camera. Is there anyone who can help us
with this problem? I know that this printer is dated, but
it is the best printer we have ever purchased (still
looks brand new)and we use it exclusively for our
documents. Any help would be greatly appreciated.
Thanks, tiger
 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Most Popular Canon Toner, Canon Ink Cartridges, Canon Ribbons Jacobs Printers 0 17th Jul 2010 12:44 PM
none of the authentication methods supported by this client are supported by your server Wayne Dolby Microsoft Outlook 7 8th May 2009 05:33 PM
Re: 13x19 borderless on Canon s9000 and 13" high six-sheets long banners on Canon i9100? Michael J Davis Printers 1 5th May 2009 05:51 PM
Fix error: None of the authentication methods supported by this client are supported by your server Pat Microsoft Outlook Discussion 0 20th Apr 2009 08:15 PM
no DX 10 supported driver on first DX10 supported card zaxon Windows Vista General Discussion 17 5th Dec 2006 03:53 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 01:03 PM.