<(E-Mail Removed)> typed:
> "SleeperMan" <(E-Mail Removed)> wrote in message
> news:<QRyMb.1421$%(E-Mail Removed)>...
>> <(E-Mail Removed)> typed:
>>
>>> How do you refill Canon i 550 cartridges? There is a port on top
>>> that seems to be a type of valve. Does it allow refilling? I tried
>>> injecting ink into the reservoir but it all leaked out since I
>>> couldn't establish a partial vacuum once I punctured the cartridge.
>>> The port on top seems to have a hole in it and seems to swivel but I
>>> couldn't get any ink through it.
>>> Sincerely, J Buzby
>>
>> Very easy - first seal bottom hole which is used during normal use
>> (use
>> electric tape). Then drill small hole either in the middle of that
>> "valve" ,
>> which is not a valve, but seal for original filling, or even better
>> drill a
>> hole near it - a bit above that valve. When you fill ink, seal this
>> new hole
>> with electric tape and remove bottom seal. You can also use small
>> screw, but
>> you must use stainless type (INOX). Just remember that top must be
>> sealed
>> perfectly.
>
> Why Refill????
>
> I buy Campatables voor mij Canon I550 (BCI-3(e)BK BCI-6(e) cmy each
> for only
> ? 2,-- and 4 complete sets voor ?30,--. 16 cardridges for ?30,-- is
> cheap I think. I use these cardridges since may 2003 and no problems
> at all.
> They are garanteed so I want refill the cardridges.
> Look for a seller at www.mvcd.com you can find the adres where I buy
> my cardridges.
>
> Succes
because i can't find any compatibles (yet) locally and i have no intention
of buying via web, since i'll pay for postage & packing more than for carts.
And refill ink i've got is same quality and about 4 times cheaper than
original carts. If i ever see compatibles, i'll definitely think of buying
them for reasonable price.
Oh...above link...too far from me...