error in device mgr/usb "unknown device" . . the OS realizes a device has
been plugged in, but not what the device is . . . any ideas? Other devices
like mouse, flash mem, etc are fine in the same physical port . . .

Have you installed the Canon software?

"John" <(E-Mail Removed)> wrote in message
news:0985351D-9AEB-4983-AE21-(E-Mail Removed)...
> error in device mgr/usb "unknown device" . . the OS realizes a device has
> been plugged in, but not what the device is . . . any ideas? Other
> devices
> like mouse, flash mem, etc are fine in the same physical port . . .
>

Much better to take out the card from the camera and insert it into a card
reader/writer. A lot of laptops will accept certain cards directly without
needing card readers/writers.

Far more sensible idea that hooking up the camera and it runs out of battery
juice in the middle of doing something. Tough luck! Or connect the camera up
to the mains. Too much trouble.

Hooking up the camera to the computer is like doing it with a hooker. No
pleasure in it.

--
choronik
======
"Colin Barnhorst" <(E-Mail Removed)> wrote in message
news67D344B-8AB8-4243-84EE-(E-Mail Removed)...
> Have you installed the Canon software?
>
> "John" <(E-Mail Removed)> wrote in message
> news:0985351D-9AEB-4983-AE21-(E-Mail Removed)...
>> error in device mgr/usb "unknown device" . . the OS realizes a device
>> has
>> been plugged in, but not what the device is . . . any ideas? Other
>> devices
>> like mouse, flash mem, etc are fine in the same physical port . . .
>>
>
>