Can anyone tell me why I cannot UNC to a machine after installing Service
Pack 2 for Windows XP. I do have the firewall turned on with exceptions.
They are File and Printer Sharing and Remote Assistence. There are a few
other ports and or apps that I have in the exceptions list and are used
mainly for Remote Control services in our organization. What port or app do
I need to enable to allow UNC'ing on a Windows XP Service Pack 2 machine?

John Vee wrote:

> Can anyone tell me why I cannot UNC to a machine after installing Service
> Pack 2 for Windows XP. I do have the firewall turned on with exceptions.
> They are File and Printer Sharing and Remote Assistence. There are a few
> other ports and or apps that I have in the exceptions list and are used
> mainly for Remote Control services in our organization. What port or app do
> I need to enable to allow UNC'ing on a Windows XP Service Pack 2 machine?
Hi

Does it work if you temporary disable the firewall?

Is so, enable the firewall again and then enable firewall logging and
analyze the log file:

Troubleshooting Windows Firewall settings in Windows XP Service Pack 2
http://support.microsoft.com/default.aspx?kbid=875357

A much more detailed version:
Troubleshooting Windows Firewall in Microsoft Windows XP Service Pack 2
http://www.microsoft.com/downloads/d...DisplayLang=en


The Cable Guy - February 2004
Manually Configuring Windows Firewall in Windows XP Service Pack 2
http://www.microsoft.com/technet/com...uy/cg0204.mspx



--
torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
Administration scripting examples and an ONLINE version of
the 1328 page Scripting Guide:
http://www.microsoft.com/technet/scr...r/default.mspx

Open up a Command Propmt window;

Start | Run | cmd - click OK

then try this command;

netsh firewall set service type = fileandprint mode = enable scope = all

See what happens then ?

Good luck.

"John Vee" wrote:

> Can anyone tell me why I cannot UNC to a machine after installing Service
> Pack 2 for Windows XP. I do have the firewall turned on with exceptions.
> They are File and Printer Sharing and Remote Assistence. There are a few
> other ports and or apps that I have in the exceptions list and are used
> mainly for Remote Control services in our organization. What port or app do
> I need to enable to allow UNC'ing on a Windows XP Service Pack 2 machine?
>
>
>

Ok I see the err in my way. I was using the netsh command but not the
complete command. I did not use the "Scope = all" part of the command. We
have many subnets and not using the scope = all only enables people on the
same subnet to UNC and everyone on a different subnet to not UNC. Thanks for
pointing that out to me. This would have been the one and only thing I didnt
check.

netsh firewall set service type = fileandprint mode = enable scope = all


"John Vee" <(E-Mail Removed)> wrote in message
news:uOf21bj$(E-Mail Removed)...
> Can anyone tell me why I cannot UNC to a machine after installing Service
> Pack 2 for Windows XP. I do have the firewall turned on with exceptions.
> They are File and Printer Sharing and Remote Assistence. There are a few
> other ports and or apps that I have in the exceptions list and are used
> mainly for Remote Control services in our organization. What port or app
> do I need to enable to allow UNC'ing on a Windows XP Service Pack 2
> machine?
>