I have reinstalled, repaired and done all I can to receive/send my msgs. and
all I can get is an error msg saying server says service is unavailable. Is
microsoft experiencing difficulties. Or is it Hotmail?
Can any one tell me what is going on?

Thanx

Thanks
I will check that out. Hope it is in there

"yam" wrote:

> hello sir , do u get any error message starting with 0x800 if yes try to find
> the steps in the site and also u can use 813514 this is the knowledge base
> article u can log into support.microsoft.com and checck this article
>
> and also try creating a new profile and also check the telnet there might be
> port blockage in the server end

if the server says, the service is unawailable, than obviously the server has
a problem! Would be nice to know WHAT mailserver you configured so you could
start troubleshooting from there...

--
I am what I am - the cow don''t make ham...


"livenlrge" wrote:

> I have reinstalled, repaired and done all I can to receive/send my msgs. and
> all I can get is an error msg saying server says service is unavailable. Is
> microsoft experiencing difficulties. Or is it Hotmail?
> Can any one tell me what is going on?
>
> Thanx

Sometimes simple is always the best. I removed the account from Outlook,
then put it back in and all is well. Thank You all for your help and
suggestions.

Life is like a KISS - "Keep It Simple Stupid"

Livenlrge

"Janet B" wrote:

> I had a similar issue. Tried repairing etc. Finally delelted the account
> that would not work - recreated it and all was well
>
> "livenlrge" wrote:
>
> > Thanks
> > I will check that out. Hope it is in there
> >
> > "yam" wrote:
> >
> > > hello sir , do u get any error message starting with 0x800 if yes try to find
> > > the steps in the site and also u can use 813514 this is the knowledge base
> > > article u can log into support.microsoft.com and checck this article
> > >
> > > and also try creating a new profile and also check the telnet there might be
> > > port blockage in the server end

I had a similar issue. Tried repairing etc. Finally delelted the account
that would not work - recreated it and all was well

"livenlrge" wrote:

> Thanks
> I will check that out. Hope it is in there
>
> "yam" wrote:
>
> > hello sir , do u get any error message starting with 0x800 if yes try to find
> > the steps in the site and also u can use 813514 this is the knowledge base
> > article u can log into support.microsoft.com and checck this article
> >
> > and also try creating a new profile and also check the telnet there might be
> > port blockage in the server end