Have a LXE VX4 forklift computer. Tried installing SP4 after removing I.I.S.
(Microsoft's KB article) and the SP4 still fails. I was able to move from SP2
to SP3. The SP4 install almost completes then it always fails. LXE says they
only support SP2. However, we had SP4 installed a few years ago on this same
VX4. Need to get SP4 on this system.

http://support.microsoft.com/kb/891861
Looked at that?

"Jeff" <(E-Mail Removed)> wrote in message
news:92950415-26DB-4831-8F13-(E-Mail Removed)...
> Have a LXE VX4 forklift computer. Tried installing SP4 after removing
> I.I.S.
> (Microsoft's KB article) and the SP4 still fails. I was able to move from
> SP2
> to SP3. The SP4 install almost completes then it always fails. LXE says
> they
> only support SP2. However, we had SP4 installed a few years ago on this
> same
> VX4. Need to get SP4 on this system.

Look for the file %systemroot%\Svcpack.log and check for errors.



--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect


"Jeff" wrote:
> Have a LXE VX4 forklift computer. Tried installing SP4 after removing
> I.I.S.
> (Microsoft's KB article) and the SP4 still fails. I was able to move from
> SP2
> to SP3. The SP4 install almost completes then it always fails. LXE says
> they
> only support SP2. However, we had SP4 installed a few years ago on this
> same
> VX4. Need to get SP4 on this system.

I have the svcpack.log file. However, what do I look for to find the problem.
I could send the file. - Thanks

"Dave Patrick" wrote:

> Look for the file %systemroot%\Svcpack.log and check for errors.
>
>
>
> --
>
> Regards,
>
> Dave Patrick ....Please no email replies - reply in newsgroup.
> Microsoft Certified Professional
> Microsoft MVP [Windows]
> http://www.microsoft.com/protect
>
>
> "Jeff" wrote:
> > Have a LXE VX4 forklift computer. Tried installing SP4 after removing
> > I.I.S.
> > (Microsoft's KB article) and the SP4 still fails. I was able to move from
> > SP2
> > to SP3. The SP4 install almost completes then it always fails. LXE says
> > they
> > only support SP2. However, we had SP4 installed a few years ago on this
> > same
> > VX4. Need to get SP4 on this system.
>
>

Look for lines with error in them as possible clues. Also try from a 'Safe
Mode' boot. You can also send it and I'll take a look.



--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect


"Jeff" wrote:
>I have the svcpack.log file. However, what do I look for to find the
>problem.
> I could send the file. - Thanks

The SP4 install fails in safe mode as well. What email address for the
svcpack.log file? -Thanks

"Dave Patrick" wrote:

> Look for lines with error in them as possible clues. Also try from a 'Safe
> Mode' boot. You can also send it and I'll take a look.
>
>
>
> --
>
> Regards,
>
> Dave Patrick ....Please no email replies - reply in newsgroup.
> Microsoft Certified Professional
> Microsoft MVP [Windows]
> http://www.microsoft.com/protect
>
>
> "Jeff" wrote:
> >I have the svcpack.log file. However, what do I look for to find the
> >problem.
> > I could send the file. - Thanks
>
>

"Jeff" <(E-Mail Removed)> wrote in message
news:19C8D48F-D252-4A82-896C-(E-Mail Removed)...

> The SP4 install fails in safe mode as well. What email address for the
> svcpack.log file? -Thanks

Remove the "nospam." in the published email address in the headers of his
post.

Yep, that's it.


--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect


"Greg Russell" wrote:
> Remove the "nospam." in the published email address in the headers of his
> post.
>
>

I still don't know what email address to send the svcpack.log file. -Thanks

"Dave Patrick" wrote:

> Yep, that's it.
>
>
> --
>
> Regards,
>
> Dave Patrick ....Please no email replies - reply in newsgroup.
> Microsoft Certified Professional
> Microsoft MVP [Windows]
> http://www.microsoft.com/protect
>
>
> "Greg Russell" wrote:
> > Remove the "nospam." in the published email address in the headers of his
> > post.
> >
> >
>

In news:CE1DD0EA-6902-45CB-917F-(E-Mail Removed),
Jeff <(E-Mail Removed)> typed:

> I still don't know what email address to send the svcpack.log file.

Select a message from from Mssr. Dave Patrick in your newsreader.

Right-click it and select "Properties"
Look for the email address on any tab.
Remove the "nospam." munge from the address, and you have it.