I need some help for installing a driver for a Brother HL 1440 laser printer,
which connects with a USB plug. Brother instructions say to install the
driver before the software (two separate tasks on the installation disk), and
I cannot install the new, MS signed, downloaded driver. I am Administrator.
I have plugged the printer into a direct home socket and disabled virus and
firewall software when I downloaded and then tried to install the printer
driver. There are no problems with the USB ports. Going into the Registry
Editor, I find a file Brother under Software and it lists Name: ab (Default),
Type: REG_SZ, Value: (Data not set)

Details of Printer Driver Installation Problem:
I initially went online to Brother Downloads and upgraded the printer driver
with Brother-recommended BROHL144.PPD, which I had used to reinstall the
printer on another computer after upgrading to XP. The wizard was not
successful, but the Installation disk loaded the software program. However,
it was simply not recognized anywhere except in Applications. I uninstalled
it, and currently cannot find any remnants on the hard drive.

I searched the XP newsgroups and found a few helpful letters, including
references for a generic driver (BHPCL4.INF) and sites (including Brother)
with specific instructions for installation. This driver is digitally signed
to work with MS Word and is recommended for the Brothers HL1440. I
downloaded this generic driver, which I have to install before I install the
printer. I have followed every step to the letter, and get part-way through
the final step (transferring data from the file to the computer/port) when it
is interrupted with the message “Printer driver is not installed. Access is
denied.” I have tried every port shown on the wizard, and not a single one
worked. I have not been able to find any further help and hope somebody here
can tell me what to try next.

I would appreciate any direct help or other useful websites.

--
E.J. Gibson Collins

Take a look here. Laser printer should be off.
http://solutions.brother.com/Library...prfaq0408.html

and here
http://www.brother.com/E-ftp/windowsxp/us.html

"ejaygee" <(E-Mail Removed)> wrote in message
news:5EE671AD-49C6-4FE0-884D-(E-Mail Removed)...
>I need some help for installing a driver for a Brother HL 1440 laser
>printer,
> which connects with a USB plug. Brother instructions say to install the
> driver before the software (two separate tasks on the installation disk),
> and
> I cannot install the new, MS signed, downloaded driver. I am
> Administrator.
> I have plugged the printer into a direct home socket and disabled virus
> and
> firewall software when I downloaded and then tried to install the printer
> driver. There are no problems with the USB ports. Going into the
> Registry
> Editor, I find a file Brother under Software and it lists Name: ab
> (Default),
> Type: REG_SZ, Value: (Data not set)
>
> Details of Printer Driver Installation Problem:
> I initially went online to Brother Downloads and upgraded the printer
> driver
> with Brother-recommended BROHL144.PPD, which I had used to reinstall the
> printer on another computer after upgrading to XP. The wizard was not
> successful, but the Installation disk loaded the software program.
> However,
> it was simply not recognized anywhere except in Applications. I
> uninstalled
> it, and currently cannot find any remnants on the hard drive.
>
> I searched the XP newsgroups and found a few helpful letters, including
> references for a generic driver (BHPCL4.INF) and sites (including Brother)
> with specific instructions for installation. This driver is digitally
> signed
> to work with MS Word and is recommended for the Brothers HL1440. I
> downloaded this generic driver, which I have to install before I install
> the
> printer. I have followed every step to the letter, and get part-way
> through
> the final step (transferring data from the file to the computer/port) when
> it
> is interrupted with the message "Printer driver is not installed. Access
> is
> denied." I have tried every port shown on the wizard, and not a single
> one
> worked. I have not been able to find any further help and hope somebody
> here
> can tell me what to try next.
>
> I would appreciate any direct help or other useful websites.
>
> --
> E.J. Gibson Collins

Thank you, but I have already tried these solutions

I am asked to find the BROHL.144.PPD driver, which does not insert/work
(although this is the drive the original XP Home uses on my old computer).
Another solution told me how to override this and go to the BHPCL4.INF driver
(which is supposed to be better than the MS driver on the program), and even
that does not work. I have tried using the "New Hardware Found" and "Add a
Printer" wizards as well as the one on the Installation Disk, and I end up
with Installation failed or Access Denied messages.

I still need some advice, please!
--
E.J. Gibson Collins


"Rich Barry" wrote:

> Take a look here. Laser printer should be off.
> http://solutions.brother.com/Library...prfaq0408.html
>
> and here
> http://www.brother.com/E-ftp/windowsxp/us.html
>
> "ejaygee" <(E-Mail Removed)> wrote in message
> news:5EE671AD-49C6-4FE0-884D-(E-Mail Removed)...
> >I need some help for installing a driver for a Brother HL 1440 laser
> >printer,
> > which connects with a USB plug. Brother instructions say to install the
> > driver before the software (two separate tasks on the installation disk),
> > and
> > I cannot install the new, MS signed, downloaded driver. I am
> > Administrator.
> > I have plugged the printer into a direct home socket and disabled virus
> > and
> > firewall software when I downloaded and then tried to install the printer
> > driver. There are no problems with the USB ports. Going into the
> > Registry
> > Editor, I find a file Brother under Software and it lists Name: ab
> > (Default),
> > Type: REG_SZ, Value: (Data not set)
> >
> > Details of Printer Driver Installation Problem:
> > I initially went online to Brother Downloads and upgraded the printer
> > driver
> > with Brother-recommended BROHL144.PPD, which I had used to reinstall the
> > printer on another computer after upgrading to XP. The wizard was not
> > successful, but the Installation disk loaded the software program.
> > However,
> > it was simply not recognized anywhere except in Applications. I
> > uninstalled
> > it, and currently cannot find any remnants on the hard drive.
> >
> > I searched the XP newsgroups and found a few helpful letters, including
> > references for a generic driver (BHPCL4.INF) and sites (including Brother)
> > with specific instructions for installation. This driver is digitally
> > signed
> > to work with MS Word and is recommended for the Brothers HL1440. I
> > downloaded this generic driver, which I have to install before I install
> > the
> > printer. I have followed every step to the letter, and get part-way
> > through
> > the final step (transferring data from the file to the computer/port) when
> > it
> > is interrupted with the message "Printer driver is not installed. Access
> > is
> > denied." I have tried every port shown on the wizard, and not a single
> > one
> > worked. I have not been able to find any further help and hope somebody
> > here
> > can tell me what to try next.
> >
> > I would appreciate any direct help or other useful websites.
> >
> > --
> > E.J. Gibson Collins
>
>
>

Disconnect all USB Devices. Go to Device Manager>USB Controllers>rt
click on each one and choose Uninstall.
Restart and let XP reinstall them. Look in Registry under
Hkey_Local_Machine\Software and HKey_Current_User\Software. Delete all
Brother folders. Uninstall any Brother Software and remove folder from
Program
Files. Then give it another try.
"ejaygee" <(E-Mail Removed)> wrote in message
news:5EE671AD-49C6-4FE0-884D-(E-Mail Removed)...
>I need some help for installing a driver for a Brother HL 1440 laser
>printer,
> which connects with a USB plug. Brother instructions say to install the
> driver before the software (two separate tasks on the installation disk),
> and
> I cannot install the new, MS signed, downloaded driver. I am
> Administrator.
> I have plugged the printer into a direct home socket and disabled virus
> and
> firewall software when I downloaded and then tried to install the printer
> driver. There are no problems with the USB ports. Going into the
> Registry
> Editor, I find a file Brother under Software and it lists Name: ab
> (Default),
> Type: REG_SZ, Value: (Data not set)
>
> Details of Printer Driver Installation Problem:
> I initially went online to Brother Downloads and upgraded the printer
> driver
> with Brother-recommended BROHL144.PPD, which I had used to reinstall the
> printer on another computer after upgrading to XP. The wizard was not
> successful, but the Installation disk loaded the software program.
> However,
> it was simply not recognized anywhere except in Applications. I
> uninstalled
> it, and currently cannot find any remnants on the hard drive.
>
> I searched the XP newsgroups and found a few helpful letters, including
> references for a generic driver (BHPCL4.INF) and sites (including Brother)
> with specific instructions for installation. This driver is digitally
> signed
> to work with MS Word and is recommended for the Brothers HL1440. I
> downloaded this generic driver, which I have to install before I install
> the
> printer. I have followed every step to the letter, and get part-way
> through
> the final step (transferring data from the file to the computer/port) when
> it
> is interrupted with the message "Printer driver is not installed. Access
> is
> denied." I have tried every port shown on the wizard, and not a single
> one
> worked. I have not been able to find any further help and hope somebody
> here
> can tell me what to try next.
>
> I would appreciate any direct help or other useful websites.
>
> --
> E.J. Gibson Collins

Thank you again, but it didn't work!

I did everything that you suggested (even removing the Brother folder with a
Brownie subfolder), except that I could not uninstall two remaining USB
portals after
I axed both my keyboard and mouse (both USB). I had to turn off the surge
protector cable to get the computer to reboot and reload all the devices.
Then I carefully plugged in the USB cable, turned on the printer, and watched
to see that it was recognized as HL1440 (it was). On came the wizard and it
started the same old loop, asking me to put in the CD to get the BROHL144.PPD
driver (which is not on the disk, and which is not the current recommended
driver)!

This is the eternal loop that I have been struggling with for the past three
days! Surely there must be some way around this. The printer is not that
old, and it was not that cheap either! Thank you to anyone who can offer
more help.

EJ Gibson Collins
--------------------------------
"Rich Barry" wrote:

> Disconnect all USB Devices. Go to Device Manager>USB Controllers>rt
> click on each one and choose Uninstall.
> Restart and let XP reinstall them. Look in Registry under
> Hkey_Local_Machine\Software and HKey_Current_User\Software. Delete all
> Brother folders. Uninstall any Brother Software and remove folder from
> Program
> Files. Then give it another try.
> "ejaygee" <(E-Mail Removed)> wrote in message
> news:5EE671AD-49C6-4FE0-884D-(E-Mail Removed)...
> >I need some help for installing a driver for a Brother HL 1440 laser
> >printer,
> > which connects with a USB plug. Brother instructions say to install the
> > driver before the software (two separate tasks on the installation disk),
> > and
> > I cannot install the new, MS signed, downloaded driver. I am
> > Administrator.
> > I have plugged the printer into a direct home socket and disabled virus
> > and
> > firewall software when I downloaded and then tried to install the printer
> > driver. There are no problems with the USB ports. Going into the
> > Registry
> > Editor, I find a file Brother under Software and it lists Name: ab
> > (Default),
> > Type: REG_SZ, Value: (Data not set)
> >
> > Details of Printer Driver Installation Problem:
> > I initially went online to Brother Downloads and upgraded the printer
> > driver
> > with Brother-recommended BROHL144.PPD, which I had used to reinstall the
> > printer on another computer after upgrading to XP. The wizard was not
> > successful, but the Installation disk loaded the software program.
> > However,
> > it was simply not recognized anywhere except in Applications. I
> > uninstalled
> > it, and currently cannot find any remnants on the hard drive.
> >
> > I searched the XP newsgroups and found a few helpful letters, including
> > references for a generic driver (BHPCL4.INF) and sites (including Brother)
> > with specific instructions for installation. This driver is digitally
> > signed
> > to work with MS Word and is recommended for the Brothers HL1440. I
> > downloaded this generic driver, which I have to install before I install
> > the
> > printer. I have followed every step to the letter, and get part-way
> > through
> > the final step (transferring data from the file to the computer/port) when
> > it
> > is interrupted with the message "Printer driver is not installed. Access
> > is
> > denied." I have tried every port shown on the wizard, and not a single
> > one
> > worked. I have not been able to find any further help and hope somebody
> > here
> > can tell me what to try next.
> >
> > I would appreciate any direct help or other useful websites.
> >
> > --
> > E.J. Gibson Collins
>
>
>

ejaygee wrote:
> I need some help for installing a driver for a Brother HL 1440 laser printer,
> which connects with a USB plug. Brother instructions say to install the
> driver before the software (two separate tasks on the installation disk), and
> I cannot install the new, MS signed, downloaded driver. I am Administrator.
> I have plugged the printer into a direct home socket and disabled virus and
> firewall software when I downloaded and then tried to install the printer
> driver. There are no problems with the USB ports. Going into the Registry
> Editor, I find a file Brother under Software and it lists Name: ab (Default),
> Type: REG_SZ, Value: (Data not set)
>
> Details of Printer Driver Installation Problem:
> I initially went online to Brother Downloads and upgraded the printer driver
> with Brother-recommended BROHL144.PPD, which I had used to reinstall the
> printer on another computer after upgrading to XP. The wizard was not
> successful, but the Installation disk loaded the software program. However,
> it was simply not recognized anywhere except in Applications. I uninstalled
> it, and currently cannot find any remnants on the hard drive.
>
> I searched the XP newsgroups and found a few helpful letters, including
> references for a generic driver (BHPCL4.INF) and sites (including Brother)
> with specific instructions for installation. This driver is digitally signed
> to work with MS Word and is recommended for the Brothers HL1440. I
> downloaded this generic driver, which I have to install before I install the
> printer. I have followed every step to the letter, and get part-way through
> the final step (transferring data from the file to the computer/port) when it
> is interrupted with the message “Printer driver is not installed. Access is
> denied.” I have tried every port shown on the wizard, and not a single one
> worked. I have not been able to find any further help and hope somebody here
> can tell me what to try next.
>
> I would appreciate any direct help or other useful websites.
>

Have you tried using a HP printer driver?

Thank you for your suggestion. No, I have not tried using an HP printer
driver. Would this be something I might find installed on the XP program, or
something I would look for on the Internet? If the former, for what would I
look and where? If the latter, for which type of HP driver would I search?

Since I seem to be fouled by the wizard that detects New Hardware and then
insists I insert the source for a certain driver (BROHL144) before I am
allowed to proceed, the only way I can get around this and use a different
driver is to "Add a Printer" from the Printers and Faxes window. Even this
did not work with a driver that Brother says will work with XP.

There must be something that will get around this!

EJ Gibson Collins
--
E.J. Gibson Collins


"Michael W. Ryder" wrote:
> Have you tried using a HP printer driver?
>

ejaygee wrote:
> Thank you for your suggestion. No, I have not tried using an HP printer
> driver. Would this be something I might find installed on the XP program, or
> something I would look for on the Internet? If the former, for what would I
> look and where? If the latter, for which type of HP driver would I search?
>

Drivers for the HP LaserJet 5Si should be on the XP disk and may work
with your printer.


> Since I seem to be fouled by the wizard that detects New Hardware and then
> insists I insert the source for a certain driver (BROHL144) before I am
> allowed to proceed, the only way I can get around this and use a different
> driver is to "Add a Printer" from the Printers and Faxes window. Even this
> did not work with a driver that Brother says will work with XP.
>
> There must be something that will get around this!
>
> EJ Gibson Collins

Although I am not sure why an HP driver would work for a Brother printer, I
looked in a number of places on my computer and could not find anything that
I could identify. The computer does not come with the XP CD, only the
restore CD, and I could not identify anything on my other "upgrade" XP CD.
When I went online, for some reason I was not able (repeatedly) to open the
next page when I tried to download the HP LLaserJet 5Si driver!

Having spent enough time on this, I guess I am still looking for another
solution. Thank you for your suggestions so far.
--
E.J. Gibson Collins


"Michael W. Ryder" wrote:

> Drivers for the HP LaserJet 5Si should be on the XP disk and may work
> with your printer.

[imationism]

I had this same problem for a while with my 1440 on a 2003 server I used this file to correctly configure. You can find it if you just copy and paste into google, i got mine from Cnet


143engc2.exe