Verbatim MKM A02 000 PX-760A 4X Recommended
Verbatim MCC01RW4X 4x PX-760A 4X Recommended
http://www.plextor.be/technicalservi...y/cdrmedia.asp
I can erase it in another brand recorder. And I burned it this. Yes it is
supported and recommended.
760A is the next to 750A, there should be no problems.
760A supports every CD/DVD +- R/RW.
"Tim Starid" <(E-Mail Removed)> wrote in message
news:AAAB413E-3AFA-4D71-A7CE-(E-Mail Removed)...
| Have you tried burning a different DVD-RW disk of a different brand? Does
| your burner support DVD-RW? Have you tried burning a DVD-RW of the same
brand?
|
| If the answer is yes to all of the above, and you received no issues with
| the above, you have a bad disk.
|
| "George Valkov" wrote:
|
| > When I try to erase a new Verbatim DVD that has been burned only once or
| > just a few times:
| > [DVD+RW] MKM-A02-00
| > [DVD-RW] MCC 01RW4X
| >
| >
| > Plextools Professional or another burning software says:
| > 037303 MEDIUM ERROR: POWER CALIBRATION FAILED
| >
| > I think the recorder is trying to erase the pre-embossed
| > lead-in on -RW disks, and that's why it fails.
| > This is a new -RW disk burned only once on the same
| > recorder:
| >
| > Drive Info ID:0 PLEXTOR DVDR PX-760A V1.06 (#292445)
| > Test Settings Read Speed: 2X CLV
| > Test Interval Length: High Accuracy
| > Test Result Disc Info: FC/6 i386 DVD DVD-RW, 3361 MB (FC/6 i386 DVD)
| > MCC 01RW4X
| >
| > Avg Max Total
| > PIE 1.71 12 22980
| > POE 0.07 313 7816
| > POF - - 0
| >
| > Test Duration 0:21:10
| >
| > Now I can no longer burn to that disk (same error code).
| > Write-transfer rate Test however starts 4.07x and finishes without any
| > problems
| > in simulation mode, but fails if no simulation.
| >
| >
| > I believe that the disk is in perfect condition.
| > QUESTIONS:
| > ~ could it be some bug in the firmware?
| > ~ What should I do?
| > I already replaced a lot of plextor recorders (the current one is number
4).
| > I'm totally borred from problems!
| >
| > I had this same problem with my old PX-760A which failed a few month
after
| > (lived 5 months total) and was replaced for this one. Before that, I
also
| > had the same
| > problem with PX716A which also failed a few months after (lived 12
months
| > total).
| >
| >
| > My current recorder is about 5 months old and so far makes perfect
quality
| > recordings
| > on Plextor DVD+R16x disks. I've burned about 15 DVDs and 15 CDs total.
| > Example of a disk burned at 16x:
| >
| > Drive Info ID:0 PLEXTOR DVDR PX-760A V1.05 (#254016)
| > Test Settings Read Speed: 5-12X CAV
| > Test Interval Length: High Accuracy
| > Test Result Disc Info: 2006-XI-27MOV36 DVD-ROM, 4447 MB
(2006-XI-27MOV36)
| >
| > Avg Max Total
| > PIE 0.83 9 14822
| > POE 0.08 170 10715
| > POF - - 0
| > Test Duration 0:28:02
| >
| > However the recorder performs bad with Verbatim DVD-R8x (CMC MAG AE1) -
| > level of PIE quickly rising about 100 to 150 oward the end of the disk.
| > and Verbatim DVD-R16x media (MCC 03RG20) - level of PIE starts about 120
| > and falls to 20 in the end of the disk.
| >
| > George Valkov
| >
| >
| >
Similar Threads
