Dear Ethan Chen,
as you know I am not a technical expert at all and at this moment I have no
clue, how to find the log files.
But I will look around, find it out and send it to you.
I write this just for your information.
Thanks for your efforts in advance.
Best regards
Deniz
"Ethan Chen" wrote:
> Hi Deniz,
>
> So your target device setting was multi(0)disk(0)rdisk(1)partition(1) and
> XPE just boot failed. If you can provide build log, it would be helpful to
> address your problem.
> --
> Best Regards,
> Ethan Chen
> Advantech Co., Ltd.
>
>
> "Deniz" wrote:
>
> > Dear Ethan Chen,
> >
> > yes I did, my target device is "E".
> > So that couldn`t be the issue?
> > Best regards
> > Deniz
> >
> >
> > "Ethan Chen" wrote:
> >
> > > Hi Deniz,
> > >
> > > Since you were using dual boot OS, did you change you "Target Device
> > > Settings"? You boot driver should be "E".
> > > --
> > > Best Regards,
> > > Ethan Chen
> > > Advantech Co., Ltd.
> > >
> > >
> > > "Deniz" wrote:
> > >
> > > >
> > > > Dear Ethan Chen,
> > > >
> > > > I have no problems to boot my regulary Windows XP professional.
> > > > I am not able to boot the created XP embedded.
> > > > First everything looks great. I can have the choice to boot between XP pro
> > > > or XPE. After choosing XPE it really begins to boot and setup the OS. But
> > > > then it returns to the boot screen, thus I am again ending up on the screen
> > > > where I can choose between XP pro and XPE.
> > > > This is a never ending procesedure.
> > > > But normally it should boot in XPE and I should make the necessary
> > > > configurations.
> > > >
> > > > So, what am I doing wrong or how can I solve this issue?
> > > > Thanks in advance.
> > > >
> > > > Best regards
> > > > Deniz
> > > >
> > > >
> > > > "Ethan Chen" wrote:
> > > >
> > > > > Hi Deniz,
> > > > >
> > > > > I don't really understand your question. Did you mean your XP Pro cannot
> > > > > reboot after copying XPE image to your secondary HDD? Or you cannot boot into
> > > > > XPE after rebooting XP Pro?
> > > > > --
> > > > > Best Regards,
> > > > > Ethan Chen
> > > > > Advantech Co., Ltd.
> > > > >
> > > > >
> > > > > "Deniz" wrote:
> > > > >
> > > > > > Hello,
> > > > > > I would like to build a Windows XP live CD with Turkish keyboard (OS is
> > > > > > Dutch).
> > > > > > I am not a very advanced user, but I followed the instructions step by step.
> > > > > > First I installed a second hard disc on my machine. My first HD had already
> > > > > > 2 partitions, so that was the third one.
> > > > > > Then I followed the instructions step by step:
> > > > > > 1-Set up the Development system
> > > > > > 2-Create a component for target devices
> > > > > > 3-Create a new configuration
> > > > > > 4-Update the configuration settings
> > > > > > 5-Check dependencies
> > > > > > 6-Build the Windows XP Embedded Run-Time Image
> > > > > > 7-Deploy the Windows XP Embedded Run-Time Image. And here exactly my problem
> > > > > > begins.
> > > > > > Because after selecting and dragging all files and directories in the build
> > > > > > directory I tried to restart my system. But it didn`t work. I tried to
> > > > > > restart in The Windows XP Embedded system and it really began to boot and
> > > > > > setup some settings. But then it returned to the starting point, where I have
> > > > > > to run my system (select between Windows XP and Windows XPE.
> > > > > >
> > > > > > Could someone tell me, what I`m doing wrong?
> > > > > > I really followed the tutorials, both video streaming and written
> > > > > > description again and again. I am following exactly all instructions. I am
> > > > > > anyway not a big technical expert and now I don`t know how to continue.
> > > > > > Because without rebooting Windows XPE I cannot continue, cannot make a
> > > > > > bootable CD Rom.
> > > > > >
|
Similar Threads
