We currently have a windows 2000 domain setup with about 6 windows 2000
servers and 10 Windows 2000 workstations.

However we cannot browse the network from any of the servers or
workstations. The domain controller can see all the machines but not the
other way around.

All network shares can be accessed through the UNC path, but no browsing
capabilities. I've confirmed that all the IP setttings and network settings
are set properly. We do get the following error when trying to browse a
network from a non domain controller machine:


<domain-name> is not accessible.
The server is not configured for transactions.


Any advice?


Thanks.

Check to see if netbios over TCP/IP is enabled on the WINs table for your
network connection.,
or check the system for the MSBlastWorm or varients, Ive seen where this
message came up when the system was infected.

http://www.annoyances.org/exec/forum/win2000/1063240889

Hope this is some assistance.

Mike



"Harjinder Singh" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> We currently have a windows 2000 domain setup with about 6 windows 2000
> servers and 10 Windows 2000 workstations.
>
> However we cannot browse the network from any of the servers or
> workstations. The domain controller can see all the machines but not the
> other way around.
>
> All network shares can be accessed through the UNC path, but no browsing
> capabilities. I've confirmed that all the IP setttings and network
settings
> are set properly. We do get the following error when trying to browse a
> network from a non domain controller machine:
>
>
> <domain-name> is not accessible.
> The server is not configured for transactions.
>
>
> Any advice?
>
>
> Thanks.
>
>
>