I recently installed XP from scratch (and installed
drivers) on a newly purchased machine.

When I connect my Boxlight 12sf projector (infocus
screenplay 110) I can not select any resolution greater
than 640x480. This projector worked without flaw under
windows 98 using the generic 1024 monitor driver.

When I connect mySony multiscan 15sf II prior to booting
the machine I can select from a variety of resolutions
greater than 640x480. i.e. everything works the way it
should

The video card is an on-board 64 meg intel
82845/g/gl/ge/pe/gv with the driver loaded (6.13.01.3442).

Can you please tell me where I am going wrong? thanks for
the help.

See if you can get an updated Boxlight driver.



"James" <(E-Mail Removed)> wrote in message
news:101701c34090$83f9cb80$(E-Mail Removed)...
| It maybe that you need to reinstall your projector or get
| a new hardwear card that is compatible with the new os.
|
| James C
| >-----Original Message-----
| >I recently installed XP from scratch (and installed
| >drivers) on a newly purchased machine.
| >
| >When I connect my Boxlight 12sf projector (infocus
| >screenplay 110) I can not select any resolution greater
| >than 640x480. This projector worked without flaw under
| >windows 98 using the generic 1024 monitor driver.
| >
| >When I connect mySony multiscan 15sf II prior to booting
| >the machine I can select from a variety of resolutions
| >greater than 640x480. i.e. everything works the way it
| >should
| >
| >The video card is an on-board 64 meg intel
| >82845/g/gl/ge/pe/gv with the driver loaded
(6.13.01.3442).
| >
| >Can you please tell me where I am going wrong? thanks
| for
| >the help.
| >
| >
| >
| >.
| >

The video card is integrated onto the MotherBoard. The
projector has no video driver. The projector instructions
say to select plug and play monitor. I have selected the
generic monitor 1024 in the past with no problems.

For some reason with XP and the projector I can not go
above 640x480.

>-----Original Message-----
>It maybe that you need to reinstall your projector or get
>a new hardwear card that is compatible with the new os.
>
>James C
>>-----Original Message-----
>>I recently installed XP from scratch (and installed
>>drivers) on a newly purchased machine.
>>
>>When I connect my Boxlight 12sf projector (infocus
>>screenplay 110) I can not select any resolution greater
>>than 640x480. This projector worked without flaw under
>>windows 98 using the generic 1024 monitor driver.
>>
>>When I connect mySony multiscan 15sf II prior to booting
>>the machine I can select from a variety of resolutions
>>greater than 640x480. i.e. everything works the way it
>>should
>>
>>The video card is an on-board 64 meg intel
>>82845/g/gl/ge/pe/gv with the driver loaded
(6.13.01.3442).
>>
>>Can you please tell me where I am going wrong? thanks
>for
>>the help.
>>
>>
>>
>>.
>>
>.
>

Try this. Set your refresh rate to 60 and see if you can adjust the
resolution.

"pascal" <(E-Mail Removed)> wrote in message
news:117801c340a0$55b13e10$(E-Mail Removed)...
> The video card is integrated onto the MotherBoard. The
> projector has no video driver. The projector instructions
> say to select plug and play monitor. I have selected the
> generic monitor 1024 in the past with no problems.
>
> For some reason with XP and the projector I can not go
> above 640x480.
>
> >-----Original Message-----
> >It maybe that you need to reinstall your projector or get
> >a new hardwear card that is compatible with the new os.
> >
> >James C
> >>-----Original Message-----
> >>I recently installed XP from scratch (and installed
> >>drivers) on a newly purchased machine.
> >>
> >>When I connect my Boxlight 12sf projector (infocus
> >>screenplay 110) I can not select any resolution greater
> >>than 640x480. This projector worked without flaw under
> >>windows 98 using the generic 1024 monitor driver.
> >>
> >>When I connect mySony multiscan 15sf II prior to booting
> >>the machine I can select from a variety of resolutions
> >>greater than 640x480. i.e. everything works the way it
> >>should
> >>
> >>The video card is an on-board 64 meg intel
> >>82845/g/gl/ge/pe/gv with the driver loaded
> (6.13.01.3442).
> >>
> >>Can you please tell me where I am going wrong? thanks
> >for
> >>the help.
> >>
> >>
> >>
> >>.
> >>
> >.
> >

All you need to do is reinstall your video card driver.
Also there is a check box "hide modes this monitor cannot
support" Try unchecking that.
chris
>-----Original Message-----
>I tried every refresh rate from 60 to 75 hertz (which are
>all supported by the projector and all work in 98).
>Unfortunatly I can still not select above 640x480.
>
>The old Sony monitor still works fine though.
>
>>-----Original Message-----
>>Try this. Set your refresh rate to 60 and see if you can
>adjust the
>>resolution.
>>
>>"pascal" <(E-Mail Removed)> wrote in message
>>news:117801c340a0$55b13e10$(E-Mail Removed)...
>>> The video card is integrated onto the MotherBoard. The
>>> projector has no video driver. The projector
>instructions
>>> say to select plug and play monitor. I have selected
>the
>>> generic monitor 1024 in the past with no problems.
>>>
>>> For some reason with XP and the projector I can not go
>>> above 640x480.
>>>
>>> >-----Original Message-----
>>> >It maybe that you need to reinstall your projector or
>get
>>> >a new hardwear card that is compatible with the new
os.
>>> >
>>> >James C
>>> >>-----Original Message-----
>>> >>I recently installed XP from scratch (and installed
>>> >>drivers) on a newly purchased machine.
>>> >>
>>> >>When I connect my Boxlight 12sf projector (infocus
>>> >>screenplay 110) I can not select any resolution
>greater
>>> >>than 640x480. This projector worked without flaw
>under
>>> >>windows 98 using the generic 1024 monitor driver.
>>> >>
>>> >>When I connect mySony multiscan 15sf II prior to
>booting
>>> >>the machine I can select from a variety of
resolutions
>>> >>greater than 640x480. i.e. everything works the way
>it
>>> >>should
>>> >>
>>> >>The video card is an on-board 64 meg intel
>>> >>82845/g/gl/ge/pe/gv with the driver loaded
>>> (6.13.01.3442).
>>> >>
>>> >>Can you please tell me where I am going wrong?
thanks
>>> >for
>>> >>the help.
>>> >>
>>> >>
>>> >>
>>> >>.
>>> >>
>>> >.
>>> >
>>
>>
>>.
>>
>.
>

I have re-installed the video card driver several times
with the latest out there.

I tried unchecking the box for unsupported modes, still I
can not select anything greater than 640x480.

Is there any way I can force XP to a resolution of my
choice since I know what the projector supports?

thanks.


>-----Original Message-----
>All you need to do is reinstall your video card driver.
>Also there is a check box "hide modes this monitor cannot
>support" Try unchecking that.
>chris
>>-----Original Message-----
>>I tried every refresh rate from 60 to 75 hertz (which
are
>>all supported by the projector and all work in 98).
>>Unfortunatly I can still not select above 640x480.
>>
>>The old Sony monitor still works fine though.
>>
>>>-----Original Message-----
>>>Try this. Set your refresh rate to 60 and see if you
can
>>adjust the
>>>resolution.
>>>
>>>"pascal" <(E-Mail Removed)> wrote in message
>>>news:117801c340a0$55b13e10$(E-Mail Removed)...
>>>> The video card is integrated onto the MotherBoard.
The
>>>> projector has no video driver. The projector
>>instructions
>>>> say to select plug and play monitor. I have selected
>>the
>>>> generic monitor 1024 in the past with no problems.
>>>>
>>>> For some reason with XP and the projector I can not go
>>>> above 640x480.
>>>>
>>>> >-----Original Message-----
>>>> >It maybe that you need to reinstall your projector
or
>>get
>>>> >a new hardwear card that is compatible with the new
>os.
>>>> >
>>>> >James C
>>>> >>-----Original Message-----
>>>> >>I recently installed XP from scratch (and installed
>>>> >>drivers) on a newly purchased machine.
>>>> >>
>>>> >>When I connect my Boxlight 12sf projector (infocus
>>>> >>screenplay 110) I can not select any resolution
>>greater
>>>> >>than 640x480. This projector worked without flaw
>>under
>>>> >>windows 98 using the generic 1024 monitor driver.
>>>> >>
>>>> >>When I connect mySony multiscan 15sf II prior to
>>booting
>>>> >>the machine I can select from a variety of
>resolutions
>>>> >>greater than 640x480. i.e. everything works the
way
>>it
>>>> >>should
>>>> >>
>>>> >>The video card is an on-board 64 meg intel
>>>> >>82845/g/gl/ge/pe/gv with the driver loaded
>>>> (6.13.01.3442).
>>>> >>
>>>> >>Can you please tell me where I am going wrong?
>thanks
>>>> >for
>>>> >>the help.
>>>> >>
>>>> >>
>>>> >>
>>>> >>.
>>>> >>
>>>> >.
>>>> >
>>>
>>>
>>>.
>>>
>>.
>>
>.
>