I have tried to restore my computer to a previous
state from both the normal mode and the safe mode. It chugs along for
at least 15 minutes and says it is restoring files and when XP boots
up again into the normal mode it says that the restoration was
incomplete and it says nothing was done to my computer. I have tried
restoring my computer from at least 30 different restore points in
the last 24 hours and nothing works.

This is my system information.
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name 732REDHILLFR
System Manufacturer HP Pavilion 061
System Model EX272AA-ABA a1520n
System Type X86-based PC
Processor x86 Family 15 Model 43 Stepping 1 AuthenticAMD ~2004
Mhz
BIOS Version/Date Phoenix Technologies, LTD 3.11, 9/19/2006
SMBIOS Version 2.4
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512
(xpsp.080413-2111)"
User Name 732REDHILLFR\HP_Administrator
Time Zone Eastern Daylight Time
Total Physical Memory 3,072.00 MB
Available Physical Memory 2.23 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 5.84 GB
Page File C:\pagefile.sys
Harold A Climer
Dept. Of Physics Geology, and Astronomy
U.T, Chattanooga
Rm. 406A Engineering, Math & Computer Science Building
615 McCallie Ave. Chattanooga TN 37403
Harold-(E-Mail Removed)

"Harold A. Climer" <Harold-(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I have tried to restore my computer to a previous
> state from both the normal mode and the safe mode. It chugs along for
> at least 15 minutes and says it is restoring files and when XP boots
> up again into the normal mode it says that the restoration was
> incomplete and it says nothing was done to my computer. I have tried
> restoring my computer from at least 30 different restore points in
> the last 24 hours and nothing works.
>
> This is my system information.
> OS Name Microsoft Windows XP Professional
> Version 5.1.2600 Service Pack 3 Build 2600
> OS Manufacturer Microsoft Corporation
> System Name 732REDHILLFR
> System Manufacturer HP Pavilion 061
> System Model EX272AA-ABA a1520n
> System Type X86-based PC
> Processor x86 Family 15 Model 43 Stepping 1 AuthenticAMD ~2004
> Mhz
> BIOS Version/Date Phoenix Technologies, LTD 3.11, 9/19/2006
> SMBIOS Version 2.4
> Windows Directory C:\WINDOWS
> System Directory C:\WINDOWS\system32
> Boot Device \Device\HarddiskVolume1
> Locale United States
> Hardware Abstraction Layer Version = "5.1.2600.5512
> (xpsp.080413-2111)"
> User Name 732REDHILLFR\HP_Administrator
> Time Zone Eastern Daylight Time
> Total Physical Memory 3,072.00 MB
> Available Physical Memory 2.23 GB
> Total Virtual Memory 2.00 GB
> Available Virtual Memory 1.96 GB
> Page File Space 5.84 GB
> Page File C:\pagefile.sys
> Harold A Climer
> Dept. Of Physics Geology, and Astronomy
> U.T, Chattanooga
> Rm. 406A Engineering, Math & Computer Science Building
> 615 McCallie Ave. Chattanooga TN 37403
> Harold-(E-Mail Removed)

Antivirus programs and 3rd party firewalls will sometimes interfere with a
successful System Restore. You can always try it in safe mode with command
prompt:

How to start the System Restore tool by using the safe mode option with the
Command prompt in Windows XP http://support.microsoft.com/kb/304449

This has worked for me when the normal routes have failed.
--
SC Tom

"Harold A. Climer" wrote:

> I have tried to restore my computer to a previous
> state from both the normal mode and the safe mode. It chugs along for
> at least 15 minutes and says it is restoring files and when XP boots
> up again into the normal mode it says that the restoration was
> incomplete and it says nothing was done to my computer. I have tried
> restoring my computer from at least 30 different restore points in
> the last 24 hours and nothing works.
>
> This is my system information.
> OS Name Microsoft Windows XP Professional
> Version 5.1.2600 Service Pack 3 Build 2600
> OS Manufacturer Microsoft Corporation
> System Name 732REDHILLFR
> System Manufacturer HP Pavilion 061
> System Model EX272AA-ABA a1520n
> System Type X86-based PC
> Processor x86 Family 15 Model 43 Stepping 1 AuthenticAMD ~2004
> Mhz
> BIOS Version/Date Phoenix Technologies, LTD 3.11, 9/19/2006
> SMBIOS Version 2.4
> Windows Directory C:\WINDOWS
> System Directory C:\WINDOWS\system32
> Boot Device \Device\HarddiskVolume1
> Locale United States
> Hardware Abstraction Layer Version = "5.1.2600.5512
> (xpsp.080413-2111)"
> User Name 732REDHILLFR\HP_Administrator
> Time Zone Eastern Daylight Time
> Total Physical Memory 3,072.00 MB
> Available Physical Memory 2.23 GB
> Total Virtual Memory 2.00 GB
> Available Virtual Memory 1.96 GB
> Page File Space 5.84 GB
> Page File C:\pagefile.sys
> Harold A Climer
> Dept. Of Physics Geology, and Astronomy
> U.T, Chattanooga
> Rm. 406A Engineering, Math & Computer Science Building
> 615 McCallie Ave. Chattanooga TN 37403
> Harold-(E-Mail Removed)
> .
>

Sometimes antivirus or security suites interfere with or disable System
Restore. You didn't say what was wrong that made you feel you needed to do a
System Restore. Care to share?

What anti-virus application or security suite is installed and is your
subscription current? What anti-spyware applications (other than Defender)?
What third-party firewall (if any)?

Has a(another) Norton or McAfee application ever been installed on the
computer (e.g., a free-trial version that came preinstalled when you bought
it)?

Also see http://bertk.mvps.org/html/srfail.html


Harold A. Climer wrote:
> ...I have tried to restore my computer to a previous
> state from both the normal mode and the safe mode. It chugs along for
> at least 15 minutes and says it is restoring files and when XP boots
> up again into the normal mode it says that the restoration was
> incomplete and it says nothing was done to my computer. I have tried
> restoring my computer from at least 30 different restore points in
> the last 24 hours and nothing works.
>
> This is my system information.
> OS Name Microsoft Windows XP Professional
> Version 5.1.2600 Service Pack 3 Build 2600...

On 6/8/2010 11:41 AM, PA Bear [MS MVP] wrote:
> What anti-virus application or security suite is installed and is your
> subscription current? What anti-spyware applications (other than
> Defender)? What third-party firewall (if any)?
>
> Has a(another) Norton or McAfee application ever been installed on the
> computer (e.g., a free-trial version that came preinstalled when you
> bought it)?
>
> Also see http://bertk.mvps.org/html/srfail.html
>
>
> Harold A. Climer wrote:
>> ...I have tried to restore my computer to a previous
>> state from both the normal mode and the safe mode. It chugs along for
>> at least 15 minutes and says it is restoring files and when XP boots
>> up again into the normal mode it says that the restoration was
>> incomplete and it says nothing was done to my computer. I have tried
>> restoring my computer from at least 30 different restore points in
>> the last 24 hours and nothing works.
>>
>> This is my system information.
>> OS Name Microsoft Windows XP Professional
>> Version 5.1.2600 Service Pack 3 Build 2600...
>

+1

--
Lem

Apollo 11 - 40 years ago:
http://www.nasa.gov/mission_pages/ap...0th/index.html

On Tue, 8 Jun 2010 07:29:44 -0700, Mark Adams
<(E-Mail Removed)> wrote:

>
>
>"Harold A. Climer" wrote:
>
>> I have tried to restore my computer to a previous
>> state from both the normal mode and the safe mode. It chugs along for
>> at least 15 minutes and says it is restoring files and when XP boots
>> up again into the normal mode it says that the restoration was
>> incomplete and it says nothing was done to my computer. I have tried
>> restoring my computer from at least 30 different restore points in
>> the last 24 hours and nothing works.
>>
>> This is my system information.
>> OS Name Microsoft Windows XP Professional
>> Version 5.1.2600 Service Pack 3 Build 2600
>> OS Manufacturer Microsoft Corporation
>> System Name 732REDHILLFR
>> System Manufacturer HP Pavilion 061
>> System Model EX272AA-ABA a1520n
>> System Type X86-based PC
>> Processor x86 Family 15 Model 43 Stepping 1 AuthenticAMD ~2004
>> Mhz
>> BIOS Version/Date Phoenix Technologies, LTD 3.11, 9/19/2006
>> SMBIOS Version 2.4
>> Windows Directory C:\WINDOWS
>> System Directory C:\WINDOWS\system32
>> Boot Device \Device\HarddiskVolume1
>> Locale United States
>> Hardware Abstraction Layer Version = "5.1.2600.5512
>> (xpsp.080413-2111)"
>> User Name 732REDHILLFR\HP_Administrator
>> Time Zone Eastern Daylight Time
>> Total Physical Memory 3,072.00 MB
>> Available Physical Memory 2.23 GB
>> Total Virtual Memory 2.00 GB
>> Available Virtual Memory 1.96 GB
>> Page File Space 5.84 GB
>> Page File C:\pagefile.sys
>> Harold A Climer
>> Dept. Of Physics Geology, and Astronomy
>> U.T, Chattanooga
>> Rm. 406A Engineering, Math & Computer Science Building
>> 615 McCallie Ave. Chattanooga TN 37403
>> Harold-(E-Mail Removed)
>> .
>>
>
>Sometimes antivirus or security suites interfere with or disable System
>Restore. You didn't say what was wrong that made you feel you needed to do a
>System Restore. Care to share?

I was using MAPLE 11 to solve a Classical Mechanics problem
when a voltage spike caused the computer to go a bit wonky. I think
lightening caused a spike in the phone line since the bell rang and
possibly the power line too.
Then Maple was not responding correctly( Did not respond to mouse
clicks for menus and to close drop down windows) so I thought I would
try to a system restore. This has worked before when a particular
program was mis behaving.

"Harold A. Climer" wrote:

> On Tue, 8 Jun 2010 07:29:44 -0700, Mark Adams
> <(E-Mail Removed)> wrote:
>
> >
> >
> >"Harold A. Climer" wrote:
> >
> >> I have tried to restore my computer to a previous
> >> state from both the normal mode and the safe mode. It chugs along for
> >> at least 15 minutes and says it is restoring files and when XP boots
> >> up again into the normal mode it says that the restoration was
> >> incomplete and it says nothing was done to my computer. I have tried
> >> restoring my computer from at least 30 different restore points in
> >> the last 24 hours and nothing works.
> >>
> >> This is my system information.
> >> OS Name Microsoft Windows XP Professional
> >> Version 5.1.2600 Service Pack 3 Build 2600
> >> OS Manufacturer Microsoft Corporation
> >> System Name 732REDHILLFR
> >> System Manufacturer HP Pavilion 061
> >> System Model EX272AA-ABA a1520n
> >> System Type X86-based PC
> >> Processor x86 Family 15 Model 43 Stepping 1 AuthenticAMD ~2004
> >> Mhz
> >> BIOS Version/Date Phoenix Technologies, LTD 3.11, 9/19/2006
> >> SMBIOS Version 2.4
> >> Windows Directory C:\WINDOWS
> >> System Directory C:\WINDOWS\system32
> >> Boot Device \Device\HarddiskVolume1
> >> Locale United States
> >> Hardware Abstraction Layer Version = "5.1.2600.5512
> >> (xpsp.080413-2111)"
> >> User Name 732REDHILLFR\HP_Administrator
> >> Time Zone Eastern Daylight Time
> >> Total Physical Memory 3,072.00 MB
> >> Available Physical Memory 2.23 GB
> >> Total Virtual Memory 2.00 GB
> >> Available Virtual Memory 1.96 GB
> >> Page File Space 5.84 GB
> >> Page File C:\pagefile.sys
> >> Harold A Climer
> >> Dept. Of Physics Geology, and Astronomy
> >> U.T, Chattanooga
> >> Rm. 406A Engineering, Math & Computer Science Building
> >> 615 McCallie Ave. Chattanooga TN 37403
> >> Harold-(E-Mail Removed)
> >> .
> >>
> >
> >Sometimes antivirus or security suites interfere with or disable System
> >Restore. You didn't say what was wrong that made you feel you needed to do a
> >System Restore. Care to share?
>
> I was using MAPLE 11 to solve a Classical Mechanics problem
> when a voltage spike caused the computer to go a bit wonky. I think
> lightening caused a spike in the phone line since the bell rang and
> possibly the power line too.
> Then Maple was not responding correctly( Did not respond to mouse
> clicks for menus and to close drop down windows) so I thought I would
> try to a system restore. This has worked before when a particular
> program was mis behaving.
>
> .
>

Ooo, not good. You should be using a surge protector/uninterruptible power
supply anywhere lightning is likely. Does the machine run OK otherwise?
(nothing fried?) If the machine is yours, I would try uninstalling and
reinstalling the program. If the machine belongs to the University, I would
have the IT department reimage it.

On Wed, 9 Jun 2010 07:33:58 -0700, Mark Adams
<(E-Mail Removed)> wrote:

>
>
>"Harold A. Climer" wrote:
>
>> On Tue, 8 Jun 2010 07:29:44 -0700, Mark Adams
>> <(E-Mail Removed)> wrote:
>>
>> >
>> >
>> >"Harold A. Climer" wrote:
>> >
>> >> I have tried to restore my computer to a previous
>> >> state from both the normal mode and the safe mode. It chugs along for
>> >> at least 15 minutes and says it is restoring files and when XP boots
>> >> up again into the normal mode it says that the restoration was
>> >> incomplete and it says nothing was done to my computer. I have tried
>> >> restoring my computer from at least 30 different restore points in
>> >> the last 24 hours and nothing works.
>> >>
>> >> This is my system information.
>> >> OS Name Microsoft Windows XP Professional
>> >> Version 5.1.2600 Service Pack 3 Build 2600
>> >> OS Manufacturer Microsoft Corporation
>> >> System Name 732REDHILLFR
>> >> System Manufacturer HP Pavilion 061
>> >> System Model EX272AA-ABA a1520n
>> >> System Type X86-based PC
>> >> Processor x86 Family 15 Model 43 Stepping 1 AuthenticAMD ~2004
>> >> Mhz
>> >> BIOS Version/Date Phoenix Technologies, LTD 3.11, 9/19/2006
>> >> SMBIOS Version 2.4
>> >> Windows Directory C:\WINDOWS
>> >> System Directory C:\WINDOWS\system32
>> >> Boot Device \Device\HarddiskVolume1
>> >> Locale United States
>> >> Hardware Abstraction Layer Version = "5.1.2600.5512
>> >> (xpsp.080413-2111)"
>> >> User Name 732REDHILLFR\HP_Administrator
>> >> Time Zone Eastern Daylight Time
>> >> Total Physical Memory 3,072.00 MB
>> >> Available Physical Memory 2.23 GB
>> >> Total Virtual Memory 2.00 GB
>> >> Available Virtual Memory 1.96 GB
>> >> Page File Space 5.84 GB
>> >> Page File C:\pagefile.sys
>> >> Harold A Climer
>> >> Dept. Of Physics Geology, and Astronomy
>> >> U.T, Chattanooga
>> >> Rm. 406A Engineering, Math & Computer Science Building
>> >> 615 McCallie Ave. Chattanooga TN 37403
>> >> Harold-(E-Mail Removed)
>> >> .
>> >>
>> >
>> >Sometimes antivirus or security suites interfere with or disable System
>> >Restore. You didn't say what was wrong that made you feel you needed to do a
>> >System Restore. Care to share?
>>
>> I was using MAPLE 11 to solve a Classical Mechanics problem
>> when a voltage spike caused the computer to go a bit wonky. I think
>> lightening caused a spike in the phone line since the bell rang and
>> possibly the power line too.
>> Then Maple was not responding correctly( Did not respond to mouse
>> clicks for menus and to close drop down windows) so I thought I would
>> try to a system restore. This has worked before when a particular
>> program was mis behaving.
>>
>> .
>>
>
>Ooo, not good. You should be using a surge protector/uninterruptible power
>supply anywhere lightning is likely. Does the machine run OK otherwise?
>(nothing fried?) If the machine is yours, I would try uninstalling and
>reinstalling the program. If the machine belongs to the University, I would
>have the IT department reimage it.


As far as I can tell Maple 11 is the only thing that is mis behaving.
Office 2007 is OK. Eudora is working. So is my Usenet client Forte
Agent.
BTW I have a whole house surge protector as well as individual
protectors for my computer as well as my TV and HI-FI systems.
It may well be that the spike had nothing to do with Maple, I don't
know.
BTW someone asked what Anti Virus software I am using. It was Norton
and installed in September 2008, so whatever version was out then is
what I have. I have the latest updates and definitions for it.
I am also using the latest version of Zone Alarm Pro.

I might have to re-install Maple 11. This could be a real pain,
because I will probably have to get a new purchase code.
A friend of mine got a new computer surplused the old one and tried to
install Maple on the new one and the folks at Maplesoft gave him a
bit of a hassle because they thought he was installing it on more that
the allowed number of computers. (2) for a Personal Licenses.
Harold A Climer
Dept. Of Physics Geology, and Astronomy
U.T, Chattanooga
Rm. 406A Engineering, Math & Computer Science Building
615 McCallie Ave. Chattanooga TN 37403
Harold-(E-Mail Removed)

"Harold A. Climer" wrote:

> On Wed, 9 Jun 2010 07:33:58 -0700, Mark Adams
> <(E-Mail Removed)> wrote:
>
> >
> >
> >"Harold A. Climer" wrote:
> >
> >> On Tue, 8 Jun 2010 07:29:44 -0700, Mark Adams
> >> <(E-Mail Removed)> wrote:
> >>
> >> >
> >> >
> >> >"Harold A. Climer" wrote:
> >> >
> >> >> I have tried to restore my computer to a previous
> >> >> state from both the normal mode and the safe mode. It chugs along for
> >> >> at least 15 minutes and says it is restoring files and when XP boots
> >> >> up again into the normal mode it says that the restoration was
> >> >> incomplete and it says nothing was done to my computer. I have tried
> >> >> restoring my computer from at least 30 different restore points in
> >> >> the last 24 hours and nothing works.
> >> >>
> >> >> This is my system information.
> >> >> OS Name Microsoft Windows XP Professional
> >> >> Version 5.1.2600 Service Pack 3 Build 2600
> >> >> OS Manufacturer Microsoft Corporation
> >> >> System Name 732REDHILLFR
> >> >> System Manufacturer HP Pavilion 061
> >> >> System Model EX272AA-ABA a1520n
> >> >> System Type X86-based PC
> >> >> Processor x86 Family 15 Model 43 Stepping 1 AuthenticAMD ~2004
> >> >> Mhz
> >> >> BIOS Version/Date Phoenix Technologies, LTD 3.11, 9/19/2006
> >> >> SMBIOS Version 2.4
> >> >> Windows Directory C:\WINDOWS
> >> >> System Directory C:\WINDOWS\system32
> >> >> Boot Device \Device\HarddiskVolume1
> >> >> Locale United States
> >> >> Hardware Abstraction Layer Version = "5.1.2600.5512
> >> >> (xpsp.080413-2111)"
> >> >> User Name 732REDHILLFR\HP_Administrator
> >> >> Time Zone Eastern Daylight Time
> >> >> Total Physical Memory 3,072.00 MB
> >> >> Available Physical Memory 2.23 GB
> >> >> Total Virtual Memory 2.00 GB
> >> >> Available Virtual Memory 1.96 GB
> >> >> Page File Space 5.84 GB
> >> >> Page File C:\pagefile.sys
> >> >> Harold A Climer
> >> >> Dept. Of Physics Geology, and Astronomy
> >> >> U.T, Chattanooga
> >> >> Rm. 406A Engineering, Math & Computer Science Building
> >> >> 615 McCallie Ave. Chattanooga TN 37403
> >> >> Harold-(E-Mail Removed)
> >> >> .
> >> >>
> >> >
> >> >Sometimes antivirus or security suites interfere with or disable System
> >> >Restore. You didn't say what was wrong that made you feel you needed to do a
> >> >System Restore. Care to share?
> >>
> >> I was using MAPLE 11 to solve a Classical Mechanics problem
> >> when a voltage spike caused the computer to go a bit wonky. I think
> >> lightening caused a spike in the phone line since the bell rang and
> >> possibly the power line too.
> >> Then Maple was not responding correctly( Did not respond to mouse
> >> clicks for menus and to close drop down windows) so I thought I would
> >> try to a system restore. This has worked before when a particular
> >> program was mis behaving.
> >>
> >> .
> >>
> >
> >Ooo, not good. You should be using a surge protector/uninterruptible power
> >supply anywhere lightning is likely. Does the machine run OK otherwise?
> >(nothing fried?) If the machine is yours, I would try uninstalling and
> >reinstalling the program. If the machine belongs to the University, I would
> >have the IT department reimage it.
>
>
> As far as I can tell Maple 11 is the only thing that is mis behaving.
> Office 2007 is OK. Eudora is working. So is my Usenet client Forte
> Agent.
> BTW I have a whole house surge protector as well as individual
> protectors for my computer as well as my TV and HI-FI systems.
> It may well be that the spike had nothing to do with Maple, I don't
> know.
> BTW someone asked what Anti Virus software I am using. It was Norton
> and installed in September 2008, so whatever version was out then is
> what I have. I have the latest updates and definitions for it.
> I am also using the latest version of Zone Alarm Pro.
>
> I might have to re-install Maple 11. This could be a real pain,
> because I will probably have to get a new purchase code.
> A friend of mine got a new computer surplused the old one and tried to
> install Maple on the new one and the folks at Maplesoft gave him a
> bit of a hassle because they thought he was installing it on more that
> the allowed number of computers. (2) for a Personal Licenses.
> Harold A Climer
> Dept. Of Physics Geology, and Astronomy
> U.T, Chattanooga
> Rm. 406A Engineering, Math & Computer Science Building
> 615 McCallie Ave. Chattanooga TN 37403
> Harold-(E-Mail Removed)
> .
>

Turn off the antivirus and firewall before doing the System Restore. But I
think it would be better to uninstall and reinstall the Maple software rather
than do a System Restore, as long as only the Maple is affected. If you are
reinstalling the software to the same computer, I can't see that Maplesoft
would object to that.