I have a Canon MP750 multifunction device. I can not get it to scan
but it will print. I have tried un-installing all of the scanner
drivers and reinstalling them two or three times. I have tried
disconnecting all other USB devices. I have tried two other USB
cables. I have tried two other USB ports. I have tried scanning
from PhotoImpact and with the MP Navigator program.

I have tried re-booting my computer several times. I have tried
unplugging the MP750 from the AC power and leaving it unplugged for
several minutes then plugging it back in. I have tried
un-installing all the USB entries in Device Manager and then
restarting my computer so that they are re-detected and
re-installed.z

Nothing works. Scanning does work when it is connected to my
brother's computer. He has an Abit KR7A-133 with an Athlon 1500+, a
gig of ram and Windows XP home service pack 2.

When I try scanning with the MP Navigator program, the program says
it is scanning for about 15 minutes and then gives an error message
of Code: 155, 0, 0 or Code: 2, 155, 0. Even after the software
gives an error message, the MP750's display still says that it is
scanning and it will not turn off until after I unplug the USB
cable.

When I try scanning from PhotoImpact it gets to from eight to twenty
percent complete and then stops for about five minutes and gives the
same error messages.

I have an Epox 8RGA+ with a Barton 2500+, a gig of ram and Windows
XP home service pack 2. Does anyone know how I can get this
multifunction device to scan when it is connected to my computer?
Thank you in advance for all replies.
--
My previous cat Rocket thought that every time I ate something he
should get some canned cat food. Marmaduke, the cat I have now,
thinks that he should get canned food and be allowed to get on the
table and eat what he wants off my plate.

"Daniel Prince" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>I have a Canon MP750 multifunction device. I can not get it to scan
> but it will print. I have tried un-installing all of the scanner
> drivers and reinstalling them two or three times. I have tried
> disconnecting all other USB devices. I have tried two other USB
> cables. I have tried two other USB ports. I have tried scanning
> from PhotoImpact and with the MP Navigator program.
>
> I have tried re-booting my computer several times. I have tried
> unplugging the MP750 from the AC power and leaving it unplugged for
> several minutes then plugging it back in. I have tried
> un-installing all the USB entries in Device Manager and then
> restarting my computer so that they are re-detected and
> re-installed.z
>
> Nothing works. Scanning does work when it is connected to my
> brother's computer. He has an Abit KR7A-133 with an Athlon 1500+, a
> gig of ram and Windows XP home service pack 2.
>
> When I try scanning with the MP Navigator program, the program says
> it is scanning for about 15 minutes and then gives an error message
> of Code: 155, 0, 0 or Code: 2, 155, 0. Even after the software
> gives an error message, the MP750's display still says that it is
> scanning and it will not turn off until after I unplug the USB
> cable.
>
> When I try scanning from PhotoImpact it gets to from eight to twenty
> percent complete and then stops for about five minutes and gives the
> same error messages.
>
> I have an Epox 8RGA+ with a Barton 2500+, a gig of ram and Windows
> XP home service pack 2. Does anyone know how I can get this
> multifunction device to scan when it is connected to my computer?
> Thank you in advance for all replies.
> --
> My previous cat Rocket thought that every time I ate something he
> should get some canned cat food. Marmaduke, the cat I have now,
> thinks that he should get canned food and be allowed to get on the
> table and eat what he wants off my plate.
Get rid of the cat! No more litter box, no more stink of pee and feces.

Have you downloaded and installed the latest software compatible with
Windows XP?
http://www.usa.canon.com/consumer/co...&modelid=10443

The latest is PIXMA MP750/780 MP Driver Ver. 600a for Windows 2000/XP

--
CSM1
http://www.carlmcmillan.com
--

"CSM1" <(E-Mail Removed)> wrote:

>Have you downloaded and installed the latest software compatible with
>Windows XP?
>http://www.usa.canon.com/consumer/co...&modelid=10443
>
>The latest is PIXMA MP750/780 MP Driver Ver. 600a for Windows 2000/XP

After I read your message, I did but it made no difference.

Could there be something wrong with the USB ports on my computer's
motherboard that prevent the MP750 from scanning even though it
prints and other USB devices work?

Do you think I should try buying and installing an add-on USB 2.0
card with the NEC chipset? (I have read that cards with the NEC
chipset are the best.)

--
My previous cat Rocket thought that every time I ate something he
should get some canned cat food. Marmaduke, the cat I have now,
thinks that he should get canned food and be allowed to get on the
table and eat what he wants off my plate.

Daniel Prince <(E-Mail Removed)> wrote:

>I have a Canon MP750 multifunction device. I can not get it to scan
>but it will print. I have tried un-installing all of the scanner
>drivers and reinstalling them two or three times. I have tried
>disconnecting all other USB devices. I have tried two other USB
>cables. I have tried two other USB ports. I have tried scanning
>from PhotoImpact and with the MP Navigator program.
>
>I have tried re-booting my computer several times. I have tried
>unplugging the MP750 from the AC power and leaving it unplugged for
>several minutes then plugging it back in. I have tried
>un-installing all the USB entries in Device Manager and then
>restarting my computer so that they are re-detected and
>re-installed.z
>
>Nothing works. Scanning does work when it is connected to my
>brother's computer. He has an Abit KR7A-133 with an Athlon 1500+, a
>gig of ram and Windows XP home service pack 2.
>
>When I try scanning with the MP Navigator program, the program says
>it is scanning for about 15 minutes and then gives an error message
>of Code: 155, 0, 0 or Code: 2, 155, 0. Even after the software
>gives an error message, the MP750's display still says that it is
>scanning and it will not turn off until after I unplug the USB
>cable.
>
>When I try scanning from PhotoImpact it gets to from eight to twenty
>percent complete and then stops for about five minutes and gives the
>same error messages.
>
>I have an Epox 8RGA+ with a Barton 2500+, a gig of ram and Windows
>XP home service pack 2. Does anyone know how I can get this
>multifunction device to scan when it is connected to my computer?
>Thank you in advance for all replies.


I got it to work by doing a selective startup with only Microsoft
drivers loaded, un-installing the driver, installing the latest
driver (600a) and then setting my USB ports to 1.1 (instead of 1.1
and 2.0) in the BIOS. I have ordered a USB 2.0 PCI card with a NEC
chipset.

I hope that if anyone else has this problem, they find this message
on Google newsgroup search.
--
My previous cat Rocket thought that every time I ate something he
should get some canned cat food. Marmaduke, the cat I have now,
thinks that he should get canned food and be allowed to get on the
table and eat what he wants off my plate.