"Big Al" wrote:
> ..
> I use dial-up. Each time I try to connect to any of the 3 ISP's I use, I
> get this message, "All devices connected. Error 50". I do NOT get connected
> to the Internet. HELP ! Thanks
> ......Al
>
Hi Al,
This likely a hardware issue, with the modem/router or the NIC card
http://www.microsoft.com/technet/sol.../rbabna_2.mspx
" All devices connected Error 50 The request is not supported."
<Quote::>
When you tried to dial up to the Internet, you received the error "Error
6: the handle is invalid."
This issue can occur if the RAS or NDISWAN component is corrupted. The
problem can occur after removing some 3rd party program such as AT&T
dial up program because the uninstallation program may not be designed
very well. To troubleshoot this issue, please perform the following
steps.
1. Remove Modem driver from the Device Manager.
- Right click My Computer and select Properties.
- Click on Hardware, Device Manager. Click on + sign by modem, right click and
uninstall modem.
2. Delete the dial up connections and remove 3rd party RAS related
program if any.
3. Run the attached file to install RArepair.exe, then run RArepair.exe to
reinstall RAS components. Reboot.
4. Reinstall Modem driver and the 3rd party dial up program if it is
required by your ISP.
5. Recreate the dial up connection and check if the problem is resolved.
</Quote:: of Maxgle>
If the above does help write back with more info about Hardware involved,
software, and does it has been working before, what changed from that time to
when the issue arise.
Similar Threads
