I have a "CANON MULTIPASS F50 SUPER G3 (microfine droplet technology)". After
installing the Microsoft P2 update... the above Canon printer fail to
communicate with the PC. My PC gave me the following message..."Unable to
communicate with the device. Please start 'MPService' from the Services
applet in the Control Panel. Then please right-click on the Status Monitor to
Reconnect and try again."

I did... as I need copies and it worked for a while. Now, nothing
communicates with anything. However, the multipass printer,scaner,etc. works
just fine when I use it separately.

I have tryed finding the Canon drivers to upgrade... nothing was available.
This is the only problem I have not completed after MSN P2 UPGRADE. PLEASE
ADVISE...

LG

The driver is here
http://consumer.usa.canon.com/ir/con...4#New%20Window

On Sun, 3 Oct 2004 07:59:02 -0700, "lg" <(E-Mail Removed)>
wrote:

>I have a "CANON MULTIPASS F50 SUPER G3 (microfine droplet technology)". After
>installing the Microsoft P2 update... the above Canon printer fail to
>communicate with the PC. My PC gave me the following message..."Unable to
>communicate with the device. Please start 'MPService' from the Services
>applet in the Control Panel. Then please right-click on the Status Monitor to
>Reconnect and try again."
>
>I did... as I need copies and it worked for a while. Now, nothing
>communicates with anything. However, the multipass printer,scaner,etc. works
>just fine when I use it separately.
>
>I have tryed finding the Canon drivers to upgrade... nothing was available.
>This is the only problem I have not completed after MSN P2 UPGRADE. PLEASE
>ADVISE...
>
>LG
>

"lg" wrote:

> I have a "CANON MULTIPASS F50 SUPER G3 (microfine droplet technology)". After
> installing the Microsoft P2 update... the above Canon printer fail to
> communicate with the PC. My PC gave me the following message..."Unable to
> communicate with the device. Please start 'MPService' from the Services
> applet in the Control Panel. Then please right-click on the Status Monitor to
> Reconnect and try again."
>
> I did... as I need copies and it worked for a while. Now, nothing
> communicates with anything. However, the multipass printer,scaner,etc. works
> just fine when I use it separately.
>
> I have tryed finding the Canon drivers to upgrade... nothing was available.
> This is the only problem I have not completed after MSN P2 UPGRADE. PLEASE
> ADVISE...
>
> LG
>
> Dick, "YOU HAVE DONE IT AGAIN" another sucess story. The last of my problems have been solved... thanks to you! THANK YOU!!! THANK YOU!!! LG

Wrong newsgroup.

lg wrote:

> I have a "CANON MULTIPASS F50 SUPER G3 (microfine droplet technology)". After
> installing the Microsoft P2 update... the above Canon printer fail to
> communicate with the PC. My PC gave me the following message..."Unable to
> communicate with the device. Please start 'MPService' from the Services
> applet in the Control Panel. Then please right-click on the Status Monitor to
> Reconnect and try again."
>
> I did... as I need copies and it worked for a while. Now, nothing
> communicates with anything. However, the multipass printer,scaner,etc. works
> just fine when I use it separately.
>
> I have tryed finding the Canon drivers to upgrade... nothing was available.
> This is the only problem I have not completed after MSN P2 UPGRADE. PLEASE
> ADVISE...
>
> LG