I seldomly use my inkjet printer, but when I do it's for color graphics
just a couple time per year. The almost unused cartridges are typically
at least 3/4 full but dried out enough to be nonfunctional when I'm
ready to print again.

Does anyone know how to either clear the clogged cartridges that are
mostly full of liquid ink?

Or to reseal and store away the used but still working cartridges, so
that they won't dry out and clog when they're ready to be used again
several months later? Has anyone had any luck with electrical tape used
in conjunction with plastic shrink wrapping (as is used for frozen food
storage)?

[This followup was posted to comp.periphs.printers and a copy was sent
to the cited author.]

In article <sXdSe.7054$(E-Mail Removed)>,
(E-Mail Removed) says...
> I seldomly use my inkjet printer, but when I do it's for color graphics
> just a couple time per year. The almost unused cartridges are typically
> at least 3/4 full but dried out enough to be nonfunctional when I'm
> ready to print again.
>
> Does anyone know how to either clear the clogged cartridges that are
> mostly full of liquid ink?
>
> Or to reseal and store away the used but still working cartridges, so
> that they won't dry out and clog when they're ready to be used again
> several months later? Has anyone had any luck with electrical tape used
> in conjunction with plastic shrink wrapping (as is used for frozen food
> storage)?

Many printers have some form of diagnostic or demo page you can print
that will use a bit of color. Maybe running that once every week or two
might keep things flowing. For Windows, under the printer's Properties,
there is a 'Print Test Page' that has a little color for the Windows
logo in the corner. Also, many printers have utilities to do a
'cleaning'. Again, maybe do that once a month or so might help.
Otherwise, get in the habit of printing a basic color page, like from a
web page or something. You can even try setting to Draft or FastDraft or
whatever to use little ink.

If the color cartridge has multiple colors in one (most commonly 3),
then storage is tricky. Once the original seal is removed, it's
difficult to impossible to re-seal without the danger of the inks
wicking into each other.

--
If there is a no_junk in my address, please REMOVE it before replying!
All junk mail senders will be prosecuted to the fullest extent of the
law!!
http://home.att.net/~andyross

"Andrew Rossmann" <andysnewsreply@no_junk.comcast.net> wrote in message
news:(E-Mail Removed)...
> [This followup was posted to comp.periphs.printers and a copy was sent
> to the cited author.]
>
> In article <sXdSe.7054$(E-Mail Removed)>,
> (E-Mail Removed) says...
>> I seldomly use my inkjet printer, but when I do it's for color graphics
>> just a couple time per year. The almost unused cartridges are typically
>> at least 3/4 full but dried out enough to be nonfunctional when I'm
>> ready to print again.
>>
>> Does anyone know how to either clear the clogged cartridges that are
>> mostly full of liquid ink?
>>
>> Or to reseal and store away the used but still working cartridges, so
>> that they won't dry out and clog when they're ready to be used again
>> several months later? Has anyone had any luck with electrical tape used
>> in conjunction with plastic shrink wrapping (as is used for frozen food
>> storage)?
>
> Many printers have some form of diagnostic or demo page you can print
> that will use a bit of color. Maybe running that once every week or two
> might keep things flowing. For Windows, under the printer's Properties,
> there is a 'Print Test Page' that has a little color for the Windows
> logo in the corner. Also, many printers have utilities to do a
> 'cleaning'. Again, maybe do that once a month or so might help.
> Otherwise, get in the habit of printing a basic color page, like from a
> web page or something. You can even try setting to Draft or FastDraft or
> whatever to use little ink.
>
> If the color cartridge has multiple colors in one (most commonly 3),
> then storage is tricky. Once the original seal is removed, it's
> difficult to impossible to re-seal without the danger of the inks
> wicking into each other.

Thanks. I do run those test routines included with printer's software.

Perhaps then at least the black cartridge can be individually resealed?

Interesting to note that the print heads don't clog on my seldom used
Lexmark X75. The problem is proven to be confined to the cartridges, because
after the problem cartridges are replaced the machine prints normally.

Knack wrote:
> I seldomly use my inkjet printer, but when I do it's for color graphics
> just a couple time per year. The almost unused cartridges are typically
> at least 3/4 full but dried out enough to be nonfunctional when I'm
> ready to print again.
>
> Does anyone know how to either clear the clogged cartridges that are
> mostly full of liquid ink?
>
> Or to reseal and store away the used but still working cartridges, so
> that they won't dry out and clog when they're ready to be used again
> several months later? Has anyone had any luck with electrical tape used
> in conjunction with plastic shrink wrapping (as is used for frozen food
> storage)?


Try putting them in a zip lock bag with a wet paper towel. I have heard
this works but have never really tried it.

On 3-Sep-2005, Rod Williams <(E-Mail Removed)> wrote:

> > Or to reseal and store away the used but still working cartridges, so
> > that they won't dry out and clog when they're ready to be used again
> > several months later?

I've found that those with tape seals that insert onto a spike tend
to leak if removed and re-inserted. The same often happens after
refilling, and it makes quite a mess inside the printer as ink gets
thrown around by movement of the carriage.

Which printer, which brand of cartridges?

Art

Knack wrote:

> I seldomly use my inkjet printer, but when I do it's for color graphics
> just a couple time per year. The almost unused cartridges are typically
> at least 3/4 full but dried out enough to be nonfunctional when I'm
> ready to print again.
>
> Does anyone know how to either clear the clogged cartridges that are
> mostly full of liquid ink?
>
> Or to reseal and store away the used but still working cartridges, so
> that they won't dry out and clog when they're ready to be used again
> several months later? Has anyone had any luck with electrical tape used
> in conjunction with plastic shrink wrapping (as is used for frozen food
> storage)?