I have a device that has a Compact Flash as its only medium and am trying to
run FBA on it. I get an error "PROCESS1_INITIALIZATION_FAILED" after the XPE
splash screen. I noticed the CF is listed as removalbe drive ( I could see
it when the CF was booting with the XPE it came with ).

Can I run FBA on CF ?
Should the CF be a fixed device to do so ?

Thanks for your time.

Ravi,

It is better if the CF card was fixed, but it is possible to get XPe with
the EWF up and running on a CF card. Are you using EWF? You can run FBA on a
CF card, but there are some tricks with EWF.

1. When you prepared the CF card, did you use DOS to format and Bootprep to
laydown the boot correct sector?
2. If your using EWF, do you have the EnableAutoLayout component setup to
disable the auto defrag?
3. Have you check the FBALOG.TXT file to see what failed?

Regards,

Sean Liming
www.a7eng.com
Author: Windows NT Embedded Step-By-Step and XP Embedded Advanced.


"Ravi H" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I have a device that has a Compact Flash as its only medium and am trying
to
> run FBA on it. I get an error "PROCESS1_INITIALIZATION_FAILED" after the
XPE
> splash screen. I noticed the CF is listed as removalbe drive ( I could see
> it when the CF was booting with the XPE it came with ).
>
> Can I run FBA on CF ?
> Should the CF be a fixed device to do so ?
>
> Thanks for your time.
>
>

Ravi,

I saw this once when the file system the CF was formatted with was not part
of the runtime image. Try adding all the file systems (doesn't increase
footprint very much at all) and rebuild, and re-deploy. HTH,

Brad Combs
Imago Technologies

"Ravi H" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I have a device that has a Compact Flash as its only medium and am trying
to
> run FBA on it. I get an error "PROCESS1_INITIALIZATION_FAILED" after the
XPE
> splash screen. I noticed the CF is listed as removalbe drive ( I could see
> it when the CF was booting with the XPE it came with ).
>
> Can I run FBA on CF ?
> Should the CF be a fixed device to do so ?
>
> Thanks for your time.
>
>

If the Compact Flash is marked as removable it won't work. Some compact
flash manufacturers provide a utility that will mark the CF device as
non-removable.

When FBA starts, it runs EWF. EWF attempts to create a temporary partition
on the compact flash device. If the CF is removable, this will fail.
Windows can't modify partitions on removable media.

However, if the CF device is marked as fixed, it will work. It is
recommended that you contact your compact flash manufacturer to find out how
to mark your compact flash device as a fixed drive. Or, you can use an
intermediate hard disk to run FBA on. Then, copy the image over to your CF.

Dan

--
This posting is provided "AS IS" with no warranties, and confers no rights.

"Ravi H" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I have a device that has a Compact Flash as its only medium and am trying
to
> run FBA on it. I get an error "PROCESS1_INITIALIZATION_FAILED" after the
XPE
> splash screen. I noticed the CF is listed as removalbe drive ( I could see
> it when the CF was booting with the XPE it came with ).
>
> Can I run FBA on CF ?
> Should the CF be a fixed device to do so ?
>
> Thanks for your time.
>
>

Dan,

to mark the removable as fixed ,do we need the changes to be done on
our end or should it be replaced .Just to know !

Kesavan


"Dan Simpson [MS]" <(E-Mail Removed)> wrote in message news:<3f71ee81$(E-Mail Removed)>...
> If the Compact Flash is marked as removable it won't work. Some compact
> flash manufacturers provide a utility that will mark the CF device as
> non-removable.
>
> When FBA starts, it runs EWF. EWF attempts to create a temporary partition
> on the compact flash device. If the CF is removable, this will fail.
> Windows can't modify partitions on removable media.
>
> However, if the CF device is marked as fixed, it will work. It is
> recommended that you contact your compact flash manufacturer to find out how
> to mark your compact flash device as a fixed drive. Or, you can use an
> intermediate hard disk to run FBA on. Then, copy the image over to your CF.
>
> Dan
>
> --
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Ravi H" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > I have a device that has a Compact Flash as its only medium and am trying
> to
> > run FBA on it. I get an error "PROCESS1_INITIALIZATION_FAILED" after the
> XPE
> > splash screen. I noticed the CF is listed as removalbe drive ( I could see
> > it when the CF was booting with the XPE it came with ).
> >
> > Can I run FBA on CF ?
> > Should the CF be a fixed device to do so ?
> >
> > Thanks for your time.
> >
> >

Kesavan,

Contact your CF manufacturer for utility that will allow you to do that.

Slobodan

"Kesavan" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Dan,
>
> to mark the removable as fixed ,do we need the changes to be done on
> our end or should it be replaced .Just to know !
>
> Kesavan
>
>
> "Dan Simpson [MS]" <(E-Mail Removed)> wrote in message
news:<3f71ee81$(E-Mail Removed)>...
> > If the Compact Flash is marked as removable it won't work. Some compact
> > flash manufacturers provide a utility that will mark the CF device as
> > non-removable.
> >
> > When FBA starts, it runs EWF. EWF attempts to create a temporary
partition
> > on the compact flash device. If the CF is removable, this will fail.
> > Windows can't modify partitions on removable media.
> >
> > However, if the CF device is marked as fixed, it will work. It is
> > recommended that you contact your compact flash manufacturer to find out
how
> > to mark your compact flash device as a fixed drive. Or, you can use an
> > intermediate hard disk to run FBA on. Then, copy the image over to your
CF.
> >
> > Dan
> >
> > --
> > This posting is provided "AS IS" with no warranties, and confers no
rights.
> >
> > "Ravi H" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > I have a device that has a Compact Flash as its only medium and am
trying
> > to
> > > run FBA on it. I get an error "PROCESS1_INITIALIZATION_FAILED" after
the
> > XPE
> > > splash screen. I noticed the CF is listed as removalbe drive ( I could
see
> > > it when the CF was booting with the XPE it came with ).
> > >
> > > Can I run FBA on CF ?
> > > Should the CF be a fixed device to do so ?
> > >
> > > Thanks for your time.
> > >
> > >