Its like telling the system to rescan all its devices, and re-do its resouce
allocation at the hardware level.
Its normally under the Plug and Play section of the bios setup.
Cheers,
NuTs
"RM Kellogg" <(E-Mail Removed)> wrote in message
news:053a01c35dbd$b2e4b140$(E-Mail Removed)...
> NuTs,
>
> The D block in BIOS has been reserved, but its being
> ignored. What is the ECM?
>
> >-----Original Message-----
> >It isnt a w2k issues...
> >
> >reserve the block in the bios, or try resetting the ECM
> from the bios as
> >well.
> >
> >NuTs
> >
> >"RM Kellogg" <(E-Mail Removed)> wrote in message
> >news:0cf701c35c33$d78522e0$(E-Mail Removed)...
> >> I am having a memory conflict my laptop. I have added a
> >> PC104 card that requires 64K of contiguous base memory.
> >> The mfg of this card recommends the D block. (D:0000 to
> >> D:FFFF) The problem is that when booting up Windows
> give a
> >> small chunk of the D block to the PCMCIA Hardware, and
> >> when the PC104 card tries to use the entire D block, it
> >> wont. If I disable (or uninstall) the PCMCIA Hardware,
> >> the PC104 card grabs the D block, and then when re-
> enable
> >> the PCMCIA hardware, it uses a chunk in the E block, and
> >> everything works great. The problem is that when I
> reboot,
> >> it happens all over again. The PCMCIA hardware grabs a
> >> small chunk in the D block.
> >>
> >> How can I get Win2K to not use the D block for the
> PCMCIA
> >> hardware? I've tried to restrict D block usage in the
> >> bios, but Win2K ignores it.
> >>
> >>
> >>
> >
> >
> >.
> >
|
Similar Threads
