Yaron,
If you don't have IDE, SATA, SCSI controller, then this will be difficult to
boot XP or for that mater XPE from USB device, very difficult.
You can find my posting on this subject, but basically I gave up on normal
XPE boot from USB, to many unwanted features for me, and to many registry
hacking to make it work.
But you can do easily RAM disk boot from USB device( it can be removable of
fixed it is irrelevant). But you must still be able to run FBA on targeted
device.
There are some programs that can be used like TA.exe, and some utilities for
pci development that will give you hardware list.
What can I say to you,
Good luck,
Slobodan
"Yaron Maor" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi Slobodan,
>
> I've read many of the threads you linked me to. but unfortunatly I'm in a
> difficult situation here:
> my hardware is based on a DiskOnChip HD with only 128MB and without a CD
or
> IDE HD connectors.
> I can only boot from floppy or USB devices. therefore I can't install
> WinXPpro on the machine.
>
> I tried to boot from USB IDE HD to Dos and then run Winnt from a I386
folder
> I copied to it. and then run Setup
> to install winxpp to itself. this wierd setup gave me a 0x000000ED BSOD
> after the text-phase of setup.
>
> is there any other way I could scan the hardware devices?
> is there a basic list of components for a minimum working build (besides
the
> minlogon macros that don't includes everything...)
>
> thanks,
>
> Yaron Maor
>
> "Slobodan Brcin" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Read some threads from the following:
> >
>
http://groups.google.com/groups?hl=e...0x0000007B&btn
> > G=Google+Search&meta=group%3Dmicrosoft.public.windowsxp.embedded.*
> >
> > If you need more assistance ask again.
> >
> > Slobodan
> >
> > "Yaron Maor" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > Hi,
> > >
> > > I'm strugling with making a running build for my VIA ESP5000 thin
> client.
> > > at first I was using the devices.pmq I got from TA. this always led me
> to
> > > this Stop error: 0x0000007B (0xFCF2B640,0xC0000034,0x00000000....)
> > > afterwards, I tried installing WinXPpro on the machine to try running
> the
> > > TAP tool and it got stack during setup on the 0x000000ED stop error.
> > > I even tried to download and use an SLX + PMQ files from the VIA
website
> > and
> > > still got the 0x0000007B error.
> > >
> > > I'm out of ideas now.
> > >
> > > did anyone ever run into these errors and solved it?
> > > did anyone ever use the VIA ESP board?
> > >
> > > thanks,
> > >
> > > Yaron Maor
> > >
> > >
> >
> >
>
>
Similar Threads
