I have not had occasion to try this in .NET but in
customary VB problems like this, the reference to C used
in B cannot be the compiled object, the reference itself
must point to the PROJECT for C.
GL,
Sandy
>-----Original Message-----
>I tried to look for a solution for this problem but was
>not able to find any.
>I have .sln that has three projects.
>Startup project (A) is referencing the one that gives me
>the problem (B).
>B project itself references project C where I can hit
the
>break point.
>
>This project (B), when compiled, is registered in COM +
>The properties of the B project shows :
>Build>>Configuration Manager>>Active Solution
>Configuration = Debug
>Also my A project properties points to debug/ProjectB
>path, not bin/ProjectB path.
>The message on the brake point in the project B is "The
>brake point will not be hit. There are no symbols loaded
>for this document".
>I have seen many people complaining about this message.
>
>
>
>
>.
>
|
Similar Threads
