I have a P3BF Mobo and a Highpoint RAID controller I would like to put a
160GB SATA drive on this controller and boot from it (Windows 98 SE).

Does anyone know if this MOBO is capable of that? When I go into the BIOS
setup, I only see disk, network and SCSI device as boot choices. Would I
pick the SCSI device?

Or am I dreaming in thinking I can boot off of a SATA disk from P3B-F

Thanx
Bill Smith

Bill Smith wrote:
> I have a P3BF Mobo and a Highpoint RAID controller I would like to put a
> 160GB SATA drive on this controller and boot from it (Windows 98 SE).
>
> Does anyone know if this MOBO is capable of that? When I go into the BIOS
> setup, I only see disk, network and SCSI device as boot choices. Would I
> pick the SCSI device?
>
> Or am I dreaming in thinking I can boot off of a SATA disk from P3B-F
>
> Thanx
> Bill Smith

The SCSI option will probably do it..

--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from (E-Mail Removed)
Home Page: http://www.roberthancock.com/

Robert Hancock wrote:
> Bill Smith wrote:
>
>> I have a P3BF Mobo and a Highpoint RAID controller I would like to put a
>> 160GB SATA drive on this controller and boot from it (Windows 98 SE).
>>
>> Does anyone know if this MOBO is capable of that? When I go into the BIOS
>> setup, I only see disk, network and SCSI device as boot choices. Would I
>> pick the SCSI device?
>>
>> Or am I dreaming in thinking I can boot off of a SATA disk from P3B-F
>>
>> Thanx
>> Bill Smith
>
>
> The SCSI option will probably do it..
>
Hi, Bill - did it (the SCSI option) do it?

Roy